Reduce cacheline usage from 2 to 1 cacheline for sctp_globals structure. By
reordering elements, we can close gaps and simply achieve the following:

Current situation:
  /* size: 80, cachelines: 2, members: 10 */
  /* sum members: 57, holes: 4, sum holes: 16 */
  /* padding: 7 */
  /* last cacheline: 16 bytes */

Afterwards:
  /* size: 64, cachelines: 1, members: 10 */
  /* padding: 7 */
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use devm_ioremap_resource instead of of_iomap() and devm_kzalloc()
instead of kmalloc() to make cleanup paths simpler. This patch also
fixes the resource leak caused by missing corresponding iounamp()
of the of_iomap().
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
1. Further cleanup and refactoring in preparation for EF10.
2. Remove ethtool stats that are always zero on Falcon boards.
3. Add an ethtool stat for merged TX completions.
4. Prepare to support merged RX completions.
5. Prepare to support more hwmon sensors.
6. Add support for new events that are generated by EF10 firmware.
7. Update MC reboot detection for EF10.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Included changes:
- set the protocol field in the skb structure according to the encapsulated
  payload
- make the gateway component send a uevent in case of "gw client mode"
  de-selection
- increment version number
- minor code rearrangement
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function checks the upper bound but it doesn't check for negative
numbers:

	if (txq > QLCNIC_MAX_TX_RINGS) {

I've solved this by making "txq" a u32 type.  I chose that because
->tx_count in the ethtool_channels struct is a __u32.

This bug was added in aa4a1f7d ('qlcnic: Enable Tx queue changes using
ethtool for 82xx Series adapter.').
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wei Liu says:

====================
xen-netback: switch to NAPI + kthread 1:1 model

This series implements NAPI + kthread 1:1 model for Xen netback.

This model
 - provides better scheduling fairness among vifs
 - is prerequisite for implementing multiqueue for Xen network driver

The second patch has the real meat:
 - make use of NAPI to mitigate interrupt
 - kthreads are not bound to CPUs any more, so that we can take
   advantage of backend scheduler and trust it to do the right thing

Benchmark is done on a Dell T3400 workstation with 4 cores, running 4
DomUs. Netserver runs in Dom0. DomUs do netperf to Dom0 with
following command: /root/netperf -H Dom0 -fm -l120

IRQs are distributed to 4 cores by hand in the new model, while in the
old model vifs are automatically distributed to 4 kthreads.

* New model
%Cpu0  :  0.5 us, 20.3 sy,  0.0 ni, 28.9 id,  0.0 wa,  0.0 hi, 24.4 si, 25.9 st
%Cpu1  :  0.5 us, 17.8 sy,  0.0 ni, 28.8 id,  0.0 wa,  0.0 hi, 27.7 si, 25.1 st
%Cpu2  :  0.5 us, 18.8 sy,  0.0 ni, 30.7 id,  0.0 wa,  0.0 hi, 22.9 si, 27.1 st
%Cpu3  :  0.0 us, 20.1 sy,  0.0 ni, 30.4 id,  0.0 wa,  0.0 hi, 22.7 si, 26.8 st
Throughputs: 2027.89 2025.95 2018.57 2016.23 aggregated: 8088.64

* Old model
%Cpu0  :  0.5 us, 68.8 sy,  0.0 ni, 16.1 id,  0.5 wa,  0.0 hi,  2.8 si, 11.5 st
%Cpu1  :  0.4 us, 45.1 sy,  0.0 ni, 31.1 id,  0.4 wa,  0.0 hi,  2.1 si, 20.9 st
%Cpu2  :  0.9 us, 44.8 sy,  0.0 ni, 30.9 id,  0.0 wa,  0.0 hi,  1.3 si, 22.2 st
%Cpu3  :  0.8 us, 46.4 sy,  0.0 ni, 28.3 id,  1.3 wa,  0.0 hi,  2.1 si, 21.1 st
Throughputs: 1899.14 2280.43 1963.33 1893.47 aggregated: 8036.37

We can see that the impact is mainly on CPU usage. The new model moves
processing from kthread to NAPI (software interrupt).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we move to 1:1 model and melt xen_netbk and xenvif together, it would
be better to use single prefix for all functions in xen-netback.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements 1:1 model netback. NAPI and kthread are utilized
to do the weight-lifting job:

- NAPI is used for guest side TX (host side RX)
- kthread is used for guest side RX (host side TX)

Xenvif and xen_netbk are made into one structure to reduce code size.

This model provides better scheduling fairness among vifs. It is also
prerequisite for implementing multiqueue for Xen netback.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The data flow from DomU to DomU on the same host in current copying
scheme with tracking facility:

       copy
DomU --------> Dom0          DomU
 |                            ^
 |____________________________|
             copy

The page in Dom0 is a page with valid MFN. So we can always copy from
page Dom0, thus removing the need for a tracking facility.

       copy           copy
DomU --------> Dom0 -------> DomU

Simple iperf test shows no performance regression (obviously we copy
twice either way):

  W/  tracking: ~5.3Gb/s
  W/o tracking: ~5.4Gb/s
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NMatt Wilson <msw@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Whenever the GW client mode is deselected, a DEL event has
to be sent in order to tell userspace that the current
gateway has been lost. Send the uevent on state change only
if a gateway was currently selected.
Reported-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

The skb priority field may help the wireless driver to choose the right
queue (e.g. WMM queues). This should be set in batman-adv, as this
information is only available here.

This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that
only VLAN PCP is used if a VLAN header is present. Also initially set
TC_PRIO_CONTROL only for self-generated packets, and keep the priority
set by higher layers.
Signed-off-by: NSimon Wunderlich <simon@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

Jesse Gross says:

====================
A number of significant new features and optimizations for net-next/3.12.
Highlights are:
 * "Megaflows", an optimization that allows userspace to specify which
   flow fields were used to compute the results of the flow lookup.
   This allows for a major reduction in flow setups (the major
   performance bottleneck in Open vSwitch) without reducing flexibility.
 * Converting netlink dump operations to use RCU, allowing for
   additional parallelism in userspace.
 * Matching and modifying SCTP protocol fields.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter updates for your net-next tree,
they are:

* The new SYNPROXY target for iptables, including IPv4 and IPv6 support,
  from Patrick McHardy.

* nf_defrag_ipv6.o should be only linked to nf_defrag_ipv6.ko, from
  Nathan Hintz.

* Fix an old bug in REJECT, which replies with wrong MAC source address
  from the bridge, by Phil Oester.

* Fix uninitialized helper variable in the expectation support over
  nfnetlink_queue, from Florian Westphal.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
More refactoring and cleanup, particularly around filter management.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/netfilter/nf_conntrack_netlink.c: In function 'ctnetlink_nfqueue_attach_expect':
'helper' may be used uninitialized in this function

It was only initialized in if CTA_EXPECT_HELP_NAME attribute was
present, it must be NULL otherwise.

Problem added recently in bd077937
(netfilter: nfnetlink_queue: allow to attach expectations to conntracks).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add an IPv6 version of the SYNPROXY target. The main differences to the
IPv4 version is routing and IP header construction.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Extract the local TCP stack independant parts of tcp_v6_init_sequence()
and cookie_v6_check() and export them for use by the upcoming IPv6 SYNPROXY
target.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add a SYNPROXY for netfilter. The code is split into two parts, the synproxy
core with common functions and an address family specific target.

The SYNPROXY receives the connection request from the client, responds with
a SYN/ACK containing a SYN cookie and announcing a zero window and checks
whether the final ACK from the client contains a valid cookie.

It then establishes a connection to the original destination and, if
successful, sends a window update to the client with the window size
announced by the server.

Support for timestamps, SACK, window scaling and MSS options can be
statically configured as target parameters if the features of the server
are known. If timestamps are used, the timestamp value sent back to
the client in the SYN/ACK will be different from the real timestamp of
the server. In order to now break PAWS, the timestamps are translated in
the direction server->client.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Extract the local TCP stack independant parts of tcp_v4_init_sequence()
and cookie_v4_check() and export them for use by the upcoming SYNPROXY
target.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Split out sequence number adjustments from NAT and move them to the conntrack
core to make them usable for SYN proxying. The sequence number adjustment
information is moved to a seperate extend. The extend is added to new
conntracks when a NAT mapping is set up for a connection using a helper.

As a side effect, this saves 24 bytes per connection with NAT in the common
case that a connection does not have a helper assigned.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

'nf_defrag_ipv6' is built as a separate module; it shouldn't be
included in the 'nf_conntrack_ipv6' module as well.
Signed-off-by: NNathan Hintz <nlhintz@hotmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

As reported by Casper Gripenberg, in a bridged setup, using ip[6]t_REJECT
with the tcp-reset option sends out reset packets with the src MAC address
of the local bridge interface, instead of the MAC address of the intended
destination.  This causes some routers/firewalls to drop the reset packet
as it appears to be spoofed.  Fix this by bypassing ip[6]_local_out and
setting the MAC of the sender in the tcp reset packet.

This closes netfilter bugzilla #531.
Signed-off-by: NPhil Oester <kernel@linuxace.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We need to use extended requests to read and get metadata for sensors
numbered > 31.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

[bwh: Also name this new state, though we don't expect to see it in an event]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Define a flag for struct efx_rx_buffer and efx_rx_packet() that
indicates packet length must be read from the prefix.  If this
is set, read the length in __efx_rx_packet() (when the prefix
should have arrived in cache).
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Add a counter for TX merged completion events.

This is implemented in the common TX path, because the NIC event
handlers only know how many descriptors were completed, not how many
packets.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

EF10 uses an entirely different RX prefix format from Falcon-arch.
Extend struct efx_nic_type to describe this.

[bwh: Also replace the magic numbers used for the Falcon-arch RX prefix]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

efx_reset_up() calls efx_nic_type::reconfigure_mac once directly,
then again through efx_start_all() -> efx_start_port() ->
efx->type->reconfigure_mac().

This first call is also made too early to work properly on EF10.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The Huntington MC will reject all MCDI requests after an MC reboot until it sees
one with the NOT_EPOCH flag clear.  This flag is set by default for all requests,
and then cleared on the first request after we detect that an MC reboot has
occurred.

The old MCDI_STATUS_DELAY_COUNT gave a timeout of 10ms, which was not long enough
for the driver to detect that a reboot had occurred based on the warm boot count
while calling efx_mcdi_poll_reboot() from the loop in efx_mcdi_ev_death().
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Also, since we handle all DMA errors in the same way, merge
RESET_TYPE_(RX|TX)_DESC_FETCH into RESET_TYPE_DMA_ERROR.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

This field is ignored by Siena firmware but is significant to EF10 firmware.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Various hardware statistics that are available for Siena are
unavailable or meaningless for Falcon.  Huntington adds further to the
NIC-type-specific statistics, as it has different MAC blocks from
Falcon/Siena.

All NIC types still provide most statistics by DMA, and use
little-endian byte order.

Therefore:
1. Add some general utility functions for reporting hardware statistics,
   efx_nic_describe_stats() and efx_nic_update_stats().
2. Add an efx_nic_type::describe_stats operation to get the number and
   names of statistics, implemented using efx_nic_describe_stats()
3. Change efx_nic_type::update_stats to store the core statistics
   (struct rtnl_link_stats64) or full statistics (array of u64) in a
   caller-provided buffer.  Use efx_nic_update_stats() to aid in the
   implementation.
4. Rename struct efx_ethtool_stat to struct efx_sw_stat_desc and
   EFX_ETHTOOL_NUM_STATS to EFX_ETHTOOL_SW_STAT_COUNT.
5. Remove efx_nic::mac_stats and struct efx_mac_stats.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

It's not really helpful to pretend ethtool string arrays are
structured.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

We only ever used the XMAC (10G link speed) in production.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Merge the per-NIC-type MTD probe selection and struct efx_mtd_ops into
struct efx_nic_type.  Move the implementations into the appropriate
source files.

Several NVRAM functions are now only called from MTD operations which
are now implemented in the same file (falcon.c or mcdi.c).  There is no
need for them to be extern, or to be defined at all if CONFIG_SFC_MTD
is not enabled, so move them into the #ifdef CONFIG_SFC_MTD sections
in those files.

Most of the SPI-related definitions are also only used in falcon.c,
so move them there.  Put the remainder of spi.h into nic.h (which
previously included it).
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Make sure the sw_flow_key structure and valid mask boundaries are always
machine word aligned. Optimize the flow compare and mask operations
using machine word size operations. This patch improves throughput on
average by 15% when CPU is the bottleneck of forwarding packets.

This patch is inspired by ideas and code from a patch submitted by Peter
Klausler titled "replace memcmp() with specialized comparator".
However, The original patch only optimizes for architectures
support unaligned machine word access. This patch optimizes for all
architectures.
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>