提交 · 768da3dbcf50b697e5e7a921492b7f0d2cd8a8fb · openeuler / raspberrypi-kernel

06 2月, 2013 31 次提交

[media] em28xx: get rid of the dependency on module ir-kbd-i2c · 768da3db

由 Frank Schaefer 提交于 1月 13, 2013

We already have the key polling functions and the polling infrastructure in
em28xx-input, so we can easily get rid of the dependency on module ir-kbd-i2c.
For maximum safety, do not touch the key reporting mechanism for those devices.
Code size could be improved further but would have minor peformance impacts.
Tested with device "Terratec Cinergy 200 USB" (EM2800_BOARD_TERRATEC_CINERGY_200)

[mchehab@redhat.com: Fix two checkpatch.pl warnings:
 ERROR: "foo * bar" should be "foo *bar" (line 465)
 WARNING: kfree(NULL) is safe this check is probably not required (line 725)]
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

768da3db

[media] em28xx: remove i2cdprintk() messages · 62ec3f86

由 Frank Schaefer 提交于 1月 13, 2013

We don't report any key/scan codes or errors inside the key polling functions
for internal IR RC devices, just in the key handling fucntions.
Do the same for external devices.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

62ec3f86

[media] em28xx-input: remove dead code line from em28xx_get_key_em_haup() · 59cf17d8

由 Frank Schaefer 提交于 1月 13, 2013

Field 'old' of struct IR_i2c is used nowhere in module ir-kbd-i2c.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

59cf17d8

F
[media] em28xx: add missing IR RC slave address to the list of known i2c devices · 0b3966e4
由 Frank Schaefer 提交于 1月 13, 2013
```
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
```
0b3966e4

[media] cx231xx: add a missing break statement · f62436a9

由 Dan Carpenter 提交于 1月 11, 2013

My static checker complains about the fall through here.  From the
context it looks like we should add a break statement.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

f62436a9

[media] drivers/media/usb/dvb-usb/dib0700_core.c: fix left shift · 7e20f6bf

由 Nickolai Zeldovich 提交于 1月 05, 2013

Fix bug introduced in 7757ddda, where
instead of bit-negating the bitmask, the bit position was bit-negated
instead.
Signed-off-by: NNickolai Zeldovich <nickolai@csail.mit.edu>
Cc: Olivier Grenie <olivier.grenie@dibcom.fr>
Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

7e20f6bf

[media] tm6000: fix G/TRY_FMT · ed57256f

由 Hans Verkuil 提交于 2月 01, 2013

Two fixes:
- the priv field wasn't set to 0.
- only V4L2_FIELD_INTERLACED is supported.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

ed57256f

[media] tm6000: add poll op for radio device node · 52dec548

由 Hans Verkuil 提交于 9月 11, 2012

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

52dec548

[media] tm6000: set colorspace field · e618578d

由 Hans Verkuil 提交于 9月 11, 2012

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

e618578d

H
[media] tm6000: add support for control events and prio handling · 770056c4
由 Hans Verkuil 提交于 9月 11, 2012
```
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
```
770056c4

[media] tm6000: convert to the control framework · 9f747359

由 Hans Verkuil 提交于 1月 31, 2013

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

9f747359

[media] tm6000: fix querycap and input/tuner compliance issues · 2c2a0536

由 Hans Verkuil 提交于 9月 11, 2012

- add device_caps support
- fix bus_info
- fix numerous tuner-related problems due to incorrect tests
  and setting v4l2_tuner fields to wrong values.
- remove (audio) input support from the radio: it doesn't belong
  there. This also fixed a nasty issue where opening the radio
  would set dev->input to 5 for no good reason. This was never
  set back to a valid TV input after closing the radio device,
  thus leaving it at 5 which is out of bounds of the vinput
  card array.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

2c2a0536

[media] pwc: Don't return EINVAL when an unsupported pixelformat is requested · f1927479

由 Hans de Goede 提交于 1月 25, 2013

Instead chaneg the passed in format to the pwc default pixelformat.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

f1927479

[media] usb/gspca/zc3xx.c: use IS_ENABLED() macro · 78f968fa

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

78f968fa

[media] usb/gspca/xirlink_cit.c: use IS_ENABLED() macro · e32d6eb8

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

e32d6eb8

[media] usb/gspca/t613.c: use IS_ENABLED() macro · f8d26879

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

f8d26879

[media] usb/gspca/stv06xx/stv06xx.c: use IS_ENABLED() macro · 00ddb707

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

00ddb707

[media] usb/gspca/spca561.c: use IS_ENABLED() macro · 60d21563

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

60d21563

[media] usb/gspca/sonixj.c: use IS_ENABLED() macro · f11ef42e

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

f11ef42e

[media] usb/gspca/sonixb.c: use IS_ENABLED() macro · f5b6de9c

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Also replaced:
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
with:
 #if !IS_ENABLED(CONFIG_USB_SN9C102)
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

f5b6de9c

[media] usb/gspca/sn9c20x.c: use IS_ENABLED() macro · 8099affa

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

8099affa

[media] usb/gspca/se401.c: use IS_ENABLED() macro · 5fd30838

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

5fd30838

[media] usb/gspca/pac7311.c: use IS_ENABLED() macro · 2d622e91

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

2d622e91

[media] gspca/pac7302.c: use IS_ENABLED() macro · ae814c08

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

ae814c08

[media] usb/gspca/pac207.c: use IS_ENABLED() macro · 4f4d1785

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

4f4d1785

[media] usb/gspca/ov519.c: use IS_ENABLED() macro · c4ea799a

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

c4ea799a

[media] usb/gspca/konica.c: use IS_ENABLED() macro · 9bc04463

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

9bc04463

[media] usb/gspca: use IS_ENABLED() macro · 13a00fab

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

13a00fab

[media] usb/gspca/cpia1.c: use IS_ENABLED() macro · a3f6ce63

由 Peter Senna Tschudin 提交于 1月 24, 2013

replace:
 #if defined(CONFIG_INPUT) || \
     defined(CONFIG_INPUT_MODULE)
with:
 #if IS_ENABLED(CONFIG_INPUT)
This change was made for: CONFIG_INPUT
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

a3f6ce63

[media] uvcvideo: Fix race of open and suspend in error case · a82a45f6

由 Oliver Neukum 提交于 1月 10, 2013

Ming Lei reported:
IMO, there is a minor fault in the error handling path of
uvc_status_start() inside uvc_v4l2_open(), and the 'users' count should
have been decreased before usb_autopm_put_interface(). In theory, a [URB
resubmission] warning can be triggered when the device is opened just
between usb_autopm_put_interface() and atomic_dec(&stream->dev->users).
The fix is trivial.
Reported-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

a82a45f6

[media] uvcvideo: Replace memcpy with struct assignment · 8c0d44e2

由 Ezequiel Garcia 提交于 1月 14, 2013

This kind of memcpy() is error-prone. Its replacement with a struct
assignment is prefered because it's type-safe and much easier to read.
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

8c0d44e2

11 1月, 2013 3 次提交

[media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures · 68d6f84b

由 Laurent Pinchart 提交于 1月 11, 2013

The uvc_set_ctrl() calls don't write to the hardware. A failure at that
point thus leaves the device in a clean state, with no control modified.
Set the error_idx field to the count value to reflect that, as per the
V4L2 specification.
TRY_EXT_CTRLS is unchanged and the error_idx field must always be set to
the failed control index in that case.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

68d6f84b

[media] uvcvideo: Cleanup leftovers of partial revert · 29005c09

由 Laurent Pinchart 提交于 1月 11, 2013

Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media]
uvcvideo: Set error_idx properly for extended controls API failures")
missed two modifications. Clean them up.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

29005c09

[media] uvcvideo: Return -EACCES when trying to set a read-only control · 9bf42300

由 Laurent Pinchart 提交于 8月 28, 2012

Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media]
uvcvideo: Set error_idx properly for extended controls API failures")
also reverted part of commit 30ecb936
("uvcvideo: Return -EACCES when trying to access a read/write-only
control") by mistake. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

9bf42300

06 1月, 2013 6 次提交

[media] em28xx: fix audio input for TV mode of device Terratec Cinergy 250 · 5e8d02bb

由 Frank Schaefer 提交于 1月 05, 2013

Remy Blank reported that audio over USB can be made working for the television
input if .amux is changed from EM28XX_AMUX_LINE_IN to EM28XX_AMUX_VIDEO.
An examination of his devices shows, that it is indeed supplied with an EM202
AC97 audio IC. We also use this setting for the Cinergy 200.
Remy Blank also provided the original version of this patch (many thanks !).
Fixes bug 14126 (see bug report for further device details).
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NRemy Blank <remy.blank@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

5e8d02bb

[media] dib0700: do not lock interruptible on tear-down paths · a96fbe04

由 Jiri Slaby 提交于 1月 03, 2013

When mutex_lock_interruptible is used on paths where a signal can be
pending, the device is not closed properly and cannot be reused.
This usually happens when you start tzap for example and send it a
TERM signal. The signal is pending while tear-down routines are
called. Hence streaming is not properly stopped in that case. And
the device stops working from that moment on.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

a96fbe04

[media] rtl28xxu: correct some device names · 9db15638

由 Antti Palosaari 提交于 1月 04, 2013

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

9db15638

[media] rtl28xxu: add Gigabyte U7300 DVB-T Dongle · 78a5e709

由 Alexander Inyukhin 提交于 1月 04, 2013

Device with ID 1b80:d393 is the Gigabyte U7300 DVB-T dongle.
It contains decoder Realtek RTL2832U and tuner Fitipower FC0012.

[crope@iki.fi: fix trivial merge conflict]
Signed-off-by: NAlexander Inyukhin <shurick@sectorb.msk.ru>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

78a5e709

[media] rtl28xxu: [1b80:d3a8] ASUS My Cinema-U3100Mini Plus V2 · 3971e79a

由 Antti Palosaari 提交于 12月 16, 2012

RF-tuner is Fitipower FC0013
Reported-by: NRenato Gallo <renatogallo@unixproducts.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

3971e79a

[media] dvb_usb_v2: use IS_ENABLED() macro · 37b44a0f

由 Antti Palosaari 提交于 1月 04, 2013

replace:
 #if defined(CONFIG_RC_CORE) || defined(CONFIG_RC_CORE_MODULE)
with:
 #if IS_ENABLED(CONFIG_RC_CORE)
Reported-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

37b44a0f