This patch adds max_direct_dma_addr to struct dev_archdata to remove
addr_needs_map in struct dma_mapping_ops. It also converts
dma_capable() to use max_direct_dma_addr.

max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(),
called via ppc_md.pci_dma_dev_setup hook.

For further information:
http://marc.info/?t=124719060200001&r=1&w=2Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NBecky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote:
> > This patch just disables this driver on SMP kernels, as it is obviously
> > not supported.
> Why not remove the #error instead ? :-) I don't think it's still
> meaningful, especially since we use the timebase for delays nowadays
> which doesn't depend on the CPU frequency...

Your call. Take this one:

The build of a PowerMac 32bit kernel currently fails with

error: #warning "WARNING, CPUFREQ not recommended on SMP kernels"

Thie patch removes the not longer applicable SMP warning from the
PowerMac cpufreq code.
Signed-off-by: NBastian Blank <waldi@debian.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

- Add gpio-controller node for BCSR17, it is used to control USB
  speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
      pilot boards if specs and schematics are correct, though we
      don't have the pilot boards to actually test it.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

- Add usb node;
- Configure pins and clocks;
- Enable USB function in BCSR.

The support was successfully tested using serial and ethernet gadget
drivers.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but
according to User's Guide the bits are wrong for MPC8272ADS boards
(I guess definitions from pq2ads should only be used for PQ2FADS
boards).

So, let's introduce our own definitions for MPC8272ADS, and don't
include pq2ads.h.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The existing fsl_rstcr_restart function is not applicable to the
mpc8560. The Global Utilities Block on this earlier CPU doesn't have
the control/reset register at 0xe00b0.  This implements a board
specific reset function that uses the RCR(Reset Control Register) of
the sbc8560's EPLD to do a reset.
Signed-off-by: NLiang Li <Liang.Li@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add support for the P2020RDB reference board from Freescale.

Overview of P2020RDB platform
	- DDR
	  DDR2 1G
	- NOR Flash
	  16MByte
	- NAND Flash
	  32MByte
	- 3 Ethernet interfaces
	  1) etSEC1
		- RGMII
		- connected to a 5 port Vitesse Switch(VSC7385)
		- Switch is memory mapped through eLBC interface(CS#2)
		- IRQ1
	  2) etSEC2
		- SGMII
		- connected to VSC8221
		- IRQ2
	  3) etSEC3
		- RGMII
		- connected to VSC8641
		- IRQ3
	- 2 1X PCIe interfaces
	- SD/MMC ,USB
	- SPI EEPROM
	- Serial I2C EEPROM
Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

As <asm/iommu.h> doesn't contain any other hardware specific definitions
but only interfaces.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Missing tests after ioremap()
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/Signed-off-by: NStoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I wrote sputrace before generic tracing infrastrucure was available.
Now that we have the generic event tracer we can convert it over and
remove a lot of code:

  8 files changed, 45 insertions(+), 285 deletions(-)

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
the spufs trace channel by

  echo 1 > /sys/kernel/debug/tracing/events/spufs/spufs_context/enable

and then read the trace records using e.g.

  cat /sys/kernel/debug/tracing/trace
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

/proc/cpuinfo should be showing the boards revision and the revision of
the FPGA fitted. The functions currently used to access this information
as incorrect.

Additionally the VME geographical address of the PPC9A and it's status as
system contoller are available in the board registers. Show these in
cpuinfo.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Actually, the support is already there, but it requires newer U-Boots
(to fill-in clock-frequency, and setup pin multiplexing).

Though, it appears that on RDB boards USBB pins aren't multiplexed
between USB and eSDHC (unlike MDS boards, where USB and eSDHC share
pctl and pwrfault pins).

So, for RDB boards we can safely setup pinmux and manually fill-in
clock-frequency, thus making eSDHC work even with older u-boots.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

MPC8377E-WLAN are basically RDB boards except:

- RAM extended to 512 MB;
- NAND flash removed, NOR flash extended to 64 MB;
- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
- Power management MCU removed;
- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
- USB3300 PHY's ID pin grounded, thus USB port is host-only.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

- add I2C support
- add FCC1 and FCC2 support
- fix bogus gpio numbering in plattform code
Signed-off-by: NHeiko Schocher <hs@denx.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This contains all the bits that didn't fit in previous patches :-) This
includes the actual exception handlers assembly, the changes to the
kernel entry, other misc bits and wiring it all up in Kconfig.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Those definitions are currently declared extern in the .c file where
they are used, move them to a header file instead.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The code for setting up the IPIs for SMP PowerSurge marchines bitrot,
it needs to properly map the HW interrupt number
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Replace strncpy() and explicit null-termination by strlcpy()
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The STAB code used on Power3 and RS/64 uses a second scratch SPRG to
save a GPR in order to decide whether to go to do_stab_bolted_* or
to handle a normal data access exception.

This prevents our scheme of freeing SPRG3 which is user visible for
user uses since we cannot use SPRG0 which, on RS/64, seems to be
read-only for supervisor mode (like POWER4).

This reworks the STAB exception entry to use the PACA as temporary
storage instead.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The kernel uses SPRG registers for various purposes, typically in
low level assembly code as scratch registers or to hold per-cpu
global infos such as the PACA or the current thread_info pointer.

We want to be able to easily shuffle the usage of those registers
as some implementations have specific constraints realted to some
of them, for example, some have userspace readable aliases, etc..
and the current choice isn't always the best.

This patch should not change any code generation, and replaces the
usage of SPRN_SPRGn everywhere in the kernel with a named replacement
and adds documentation next to the definition of the names as to
what those are used for on each processor family.

The only parts that still use the original numbers are bits of KVM
or suspend/resume code that just blindly needs to save/restore all
the SPRGs.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The file include/asm/exception.h contains definitions
that are specific to exception handling on 64-bit server
type processors.

This renames the file to exception-64s.h to reflect that
fact and avoid confusion.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This allows to remove the ppc_md.init() hook in the setup code.
Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Linux isn't able to detect link changes on ethernet ports that were
used by U-Boot. This is because U-Boot wrongly clears interrupt
polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR,
0x1b) of Marvell PHYs.

There is no easy way for PHY drivers to know IRQ line polarity (we
could extract it from the device tree and pass it to phydevs, but
that'll be quite a lot of work), so for now just reset the PHYs to
their default states.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch fixes various badnesses like this for all interrupt
controllers:

------------[ cut here ]------------
Badness at c04db9dc [verbose debug info unavailable]
NIP: c04db9dc LR: c04db9ac CTR: 00000000
REGS: c053de30 TRAP: 0700   Not tainted  (2.6.31-rc1-00432-ge69b2b5-dirty)
MSR: 00021000 <ME,CE>  CR: 22020084  XER: 00000000
TASK = c0500480[0] 'swapper' THREAD: c053c000
GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000
GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000
GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4
GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050
NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74
LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74
Call Trace:
[c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable)
[c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108
[c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50
[c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0
[c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c
[c053dfb0] [c04cf374] init_IRQ+0x28/0x3c

p.s. commit 85355bb2 ("powerpc: Fix
mpic alloc warning") missed some alloc_bootmem() instances, this is
now fixed.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7083    1616       0    8699    21fb arch/powerpc/../axon_msi.o

size after:
   text    data     bss     dec     hex filename
   5772    1208       0    6980    1b44 arch/powerpc/../axon_msi.o
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7720    5488     296   13504    34c0 platforms/pseries/xics.o

size after:
   text    data     bss     dec     hex filename
   7535	   5456	    296	  13287	   33e7	platforms/pseries/xics.o
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

In particular, pSeries_lpar_hpte_insert() goes from 185 instructions
to 77 instructions as a result of this patch. Luckily that code
isn't called very often ...

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7284    1552     296    9132    23ac platforms/pseries/lpar.o

size after:
   text    data     bss     dec     hex filename
   5806    1096     296    7198    1c1e platforms/pseries/lpar.o
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With -Werror enabled during the build, the warp.c file fails to build
due to the temp_isr function not containing a return statement.  This
fixes the build error and documents that the function never returns.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

The GPIO LEDS driver now has a default state of "keep".  Update the Warp DTS
and platform file to take advantage of this new state.  This removes the
hardcoding of the two LEDs on the Warp.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

spin_lock() can hang if called while the timebase is frozen,
so use a raw lock instead, also disable interrupts while
at it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Several platforms use their own copy of what is essentially the same code,
using RTAS to synchronize the timebases when bringing up new CPUs. This
moves it all into a single common implementation and additionally
turns the spinlock into a raw spinlock since the former can rely on
the timebase not being frozen when spinlock debugging is enabled, and finally
masks interrupts while the timebase is disabled.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The old PowerSurge SMP (ie, dual or quad 604 machines) code has
numerous issues in modern world.

One is cpu_possible_map is set too late (the device-tree is bogus)
so we fail to allocate the interrupt stacks and crash. Another
problem is the fact the timebase is frozen by the bringup of the
second CPU so the delays in the generic code will hang, we need
to move some of the calling procedure to inside the powermac code.

This makes it boot again for me
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A change to the i2c subsystem breaks the warp platform code. The patch
is cleaner anyway, the old way was a bit crufty.

For those with keen eyes, the gratuitous change in the string from
PIKA to Warp is just so the logs look a bit nicer. The following two
lines tend to be printed one after another.

  Warp POST OK
  Warp DTM thread running.

Yeah, this will be the third patch to warp.c submitted in this
release....

Cheers,
   Sean

The i2c_client struct changed, breaking the code that looked for the ad7414
chip. Use the new of_find_i2c_device_by_node function added in 2.6.29.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Remove duplicated #include in arch/powerpc/platforms/85xx/xes_mpc85xx.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

lockdep trace found the following:

------------[ cut here ]------------
Badness at c007baf0 [verbose debug info unavailable]
NIP: c007baf0 LR: c007bad8 CTR: 00000000
REGS: ef855e00 TRAP: 0700   Tainted: G        W
(2.6.30-06736-g12a31df-dirty)
MSR: 00021000 <ME,CE>  CR: 24044022  XER: 20000000
TASK = ef858000[1] 'swapper' THREAD: ef854000 CPU: 0
GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff
GPR08: 000000d0 c0760000 c0710000 00000007 2fffffff 1004a388 7ffd9400 00000000
GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c059cd78 c075c498 c057da7c ffffffff
GPR24: ffbc8000 f1000000 00000001 c00bf8b0 c07595d4 000000d0 00021000 000000d0
NIP [c007baf0] lockdep_trace_alloc+0xc0/0xf0
LR [c007bad8] lockdep_trace_alloc+0xa8/0xf0
Call Trace:
[ef855eb0] [c007ba60] lockdep_trace_alloc+0x30/0xf0 (unreliable)
[ef855ec0] [c00cb3ac] kmem_cache_alloc+0x2c/0xf0
[ef855ee0] [c00bf8b0] __get_vm_area_node+0x80/0x1c0
[ef855f10] [c0017580] __ioremap_caller+0x1d0/0x1e0
[ef855f40] [c057da7c] smp_85xx_kick_cpu+0x64/0x124
[ef855f60] [c0599180] __cpu_up+0xd0/0x1a4
[ef855f80] [c05997c4] cpu_up+0x14c/0x1e0
[ef855fc0] [c05732a0] kernel_init+0x100/0x1c4
[ef855ff0] [c0011524] kernel_thread+0x4c/0x68
Instruction dump:
8009c174 2f800000 409e0048 73c08000 40820040 4818980d 2f830000 419effa0
3d20c076 8009c388 2f800000 409eff90 <0fe00000> 4bffff88 60000000 60000000

We were calling ioremap after we local_irq_restore(flags).  A simple
reorder fixes the problem.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

FSL RapidIO won't probe without a proper compatible entry. This
patch fixes the issue by adding fsl,rapidio-delta compatible to
mpc85xx_ids.
Signed-off-by: NRandy Vinson <rvinson@mvista.com>
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Match what other 85xx platforms do for of_platform_bus_probe and use
machine_device_initcall.  This is one small step in killing of
ppc_md.init.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>