- 28 1月, 2013 11 次提交
-
-
由 Joerg Roedel 提交于
This call-back points to the right function for initializing the msi_msg structure. The old code for msi_msg generation was split up into the irq-remapped and the default case. The irq-remapped case just calls into the specific Intel or AMD implementation when the device is behind an IOMMU. Otherwise the default function is called. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
This function does irq-remapping specific interrupt setup like modifying the chip defaults. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
The function is called unconditionally now in IO-APIC code removing another irq_remapped() check from x86 core code. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
Move all the code to either to the header file asm/irq_remapping.h or to drivers/iommu/. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
Move these checks to IRQ remapping code by introducing the panic_on_irq_remap() function. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
This pointer is changed to a different function when IRQ remapping is enabled. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
With interrupt remapping a special function is used to change the affinity of an IO-APIC interrupt. Abstract this with a function pointer. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
Use seperate routines to setup MSI IRQs for both irq_remapping_enabled cases. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
This function pointer can be overwritten by the IRQ remapping code. The irq_remapping_enabled check can be removed from default_setup_hpet_msi. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
This function pointer is used to call a system-specific function for disabling the IO-APIC. Currently this is used for IRQ remapping which has its own disable routine. Also introduce the necessary infrastructure in the interrupt remapping code to overwrite this and other function pointers as necessary by interrupt remapping. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Joerg Roedel 提交于
Move the three easy to move checks in the x86' apic.c file into the IRQ-remapping code. Signed-off-by: NJoerg Roedel <joro@8bytes.org> Acked-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 28 9月, 2012 1 次提交
-
-
由 Joerg Roedel 提交于
Finally enable interrupt remapping for AMD systems. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 17 7月, 2012 1 次提交
-
-
由 Joerg Roedel 提交于
A few sparse warnings fire in drivers/iommu/amd_iommu_init.c. Fix most of them with this patch. Also fix the sparse warnings in drivers/iommu/irq_remapping.c while at it. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 15 6月, 2012 1 次提交
-
-
由 Suresh Siddha 提交于
Move the ->irq_set_affinity() routines out of the #ifdef CONFIG_SMP sections and use config_enabled(CONFIG_SMP) checks inside those routines. Thus making those routines simple null stubs for !CONFIG_SMP and retaining those routines with no additional runtime overhead for CONFIG_SMP kernels. Cleans up the ifdef CONFIG_SMP in and around routines related to irq_set_affinity in io_apic and irq_remapping subsystems. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: torvalds@linux-foundation.org Cc: joerg.roedel@amd.com Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1339723729.3475.63.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 08 5月, 2012 1 次提交
-
-
由 Suresh Siddha 提交于
Fix the below UP build failure with CONFIG_IRQ_REMAP enabled. drivers/iommu/intel_irq_remapping.c:955:19: error: ‘struct irq_data’ has no member named ‘affinity’ Reported-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: joro@8bytes.org Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/1336460934-23592-2-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 07 5月, 2012 9 次提交
-
-
由 Suresh Siddha 提交于
Make the file names consistent with the naming conventions of irq subsystem. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Suresh Siddha 提交于
Make the code consistent with the naming conventions of irq subsystem. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch introduces remapping-ops for setting ups MSI interrupts. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
The operation for releasing a remapping entry is iommu specific too. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
The function to set interrupt affinity with interrupt remapping enabled is Intel specific too. So move it to the irq_remap_ops too. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
The IOAPIC setup routine for interrupt remapping is VT-d specific. Move it to the irq_remap_ops and add a call helper function. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Convert these calls too: * Disable of remapping hardware * Reenable of remapping hardware * Enable fault handling With that all of arch/x86/kernel/apic/apic.c is converted to use the generic intr-remapping interface. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch introduces irq_remap_ops to hold implementation specific function pointer to handle interrupt remapping. As the first part the initialization functions for VT-d are converted to these ops. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
The files contain code mostly relevant for the Intel implementation of interrupt remapping. Make that visible in the file names. Also inline intr_remapping.h into intr_remapping.c because it is only included there and the content is very small. So there is no reason for a seperate header file. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 06 12月, 2011 1 次提交
-
-
由 Sergey Senozhatsky 提交于
Fix: Section mismatch in reference from the function ir_dev_scope_init() to the function .init.text:dmar_dev_scope_init() The function ir_dev_scope_init() references the function __init dmar_dev_scope_init(). Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Youquan Song <youquan.song@intel.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfishSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 9月, 2011 2 次提交
-
-
由 Suresh Siddha 提交于
Both DMA-remapping aswell as Interrupt-remapping depend on the dmar dev scope to be initialized. When both DMA and IRQ-remapping are enabled, we depend on DMA-remapping init code to call dmar_dev_scope_init(). This resulted in not doing this init when DMA-remapping was turned off but interrupt-remapping turned on in the kernel config. This caused interrupt routing to break with CONFIG_INTR_REMAP=y and CONFIG_DMAR=n. This issue was introduced by this commit: | commit 9d5ce73a | Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> | Date: Tue Nov 10 19:46:16 2009 +0900 | | x86: intel-iommu: Convert detect_intel_iommu to use iommu_init hook Fix this by calling dmar_dev_scope_init() explicitly from the interrupt remapping code too. Reported-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.229207526@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
On the platforms which are x2apic and interrupt-remapping capable, Linux kernel is enabling x2apic even if the BIOS doesn't. This is to take advantage of the features that x2apic brings in. Some of the OEM platforms are running into issues because of this, as their bios is not x2apic aware. For example, this was resulting in interrupt migration issues on one of the platforms. Also if the BIOS SMI handling uses APIC interface to send SMI's, then the BIOS need to be aware of x2apic mode that OS has enabled. On some of these platforms, BIOS doesn't have a HW mechanism to turnoff the x2apic feature to prevent OS from enabling it. To resolve this mess, recent changes to the VT-d2 specification: http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf includes a mechanism that provides BIOS a way to request system software to opt out of enabling x2apic mode. Look at the x2apic optout flag in the DMAR tables before enabling the x2apic mode in the platform. Also print a warning that we have disabled x2apic based on the BIOS request. Kernel boot parameter "intremap=no_x2apic_optout" can be used to override the BIOS x2apic optout request. Signed-off-by: NYouquan Song <youquan.song@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.171766616@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 9月, 2011 2 次提交
-
-
由 Thomas Gleixner 提交于
The irq_2_ir_lock can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
The iommu->register_lock can be taken in atomic context and therefore must not be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 6月, 2011 1 次提交
-
-
由 Ohad Ben-Cohen 提交于
This should ease finding similarities with different platforms, with the intention of solving problems once in a generic framework which everyone can use. Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge() has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled in this patch, too. As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it. Compile-tested on x86_64. Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 29 3月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Scripted with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 12 10月, 2010 7 次提交
-
-
由 Thomas Gleixner 提交于
irq_2_iommu is in struct irq_cfg, so we can do the irq_remapped check based on irq_cfg instead of going through a lookup function. That's especially interesting in the eoi_ioapic_irq() hotpath. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
Having irq_2_iommu in struct irq_cfg allows further simplifications. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
Switch the intr_remapping code to use the irq_2_iommu struct in irg_cfg. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
That interrupt remapping code is x86 specific and tied to the io_apic code. No need for separate allocator functions in the interrupt remapping code. This allows to simplify the code and irq_2_iommu is small (13 bytes on 64bit) so it's not a real problem even if interrupt remapping is runtime disabled. If it's compile time disabled the impact is zero. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
No users. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
No need to dereference irq_desc. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
With SPARSE_IRQ=y the irte descriptors are dynamically allocated, but not freed in free_irte(). That was ok as long as the sparse irq core was not freeing irq descriptors on destroy_irq(). Now we leak the irte descriptor. Free it in free_irte(). Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
- 10 8月, 2010 1 次提交
-
-
由 Chris Wright 提交于
Allow disabling the source id checking while programming the interrupt remap table entry. Useful for debugging or working around the broken source id checks on some platforms. Signed-off-by: NChris Wright <chrisw@redhat.com> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Acked-by: NWeidong Han <weidong.han@intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-