- 06 5月, 2010 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
So we tried to speed things up a bit using flush_hash_pages() directly but that falls over on 603 of course meaning we fail to flush the TLB properly and we may even end up having it corrupt memory randomly by accessing a hash table that doesn't exist. This removes the "optimization" by always going through flush_tlb_page() for now at least. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Currently we always call start-cpu irrespective of if the CPU is stopped or not. Unfortunatley on POWER7, firmware seems to not like start-cpu being called when a cpu already been started. This was not the case on POWER6 and earlier. This patch checks to see if the CPU is stopped or not via an query-cpu-stopped-state call, and only calls start-cpu on CPUs which are stopped. This fixes a bug with kexec on POWER7 on PHYP where only the primary thread would make it to the second kernel. Reported-by: NAnkita Garg <ankita@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This moves query_cpu_stopped() out of the hotplug cpu code and into smp.c so it can called in other places and renames it to smp_query_cpu_stopped(). It also cleans up the return values by adding some #defines Cc: <stable@kernel.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stefan Roese 提交于
By setting "reset_type" to one of the following values, the default software reset mechanism may be overidden. Here the possible values of "reset_type": 1 - PPC4xx core reset 2 - PPC4xx chip reset 3 - PPC4xx system reset (default) This will be used by a new PPC440SPe board port, which needs a "chip reset" instead of the default "system reset" to be asserted. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 05 5月, 2010 7 次提交
-
-
由 Dave Kleikamp 提交于
A defconfig for the IBM ISS 476 simulator Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Torez Smith 提交于
This is a trivial 4xx plaform that uses the new simple bsp from Josh and is handy to use in simulators such as ISS or even Mambo who don't properly implement most of the actual devices in the SoC but really only the core. Signed-off-by: NTorez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
476 requires an isync after loading MMU and debug related SPR's. Some of these are in performance-critical paths and may need to be optimized, but initially, we're playing it safe. Signed-off-by: NTorez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
The 47x core's MCSR varies from 44x, so it needs it's own machine check handler. Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NTorez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
The 47x platform supports multiple cores and shares code with 44x. Break out code that is common for initializing the primary and secondary cpus into a function which can be called for both. Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Torez Smith 提交于
This patch adds a marker to the exception stack frame to aid in debugging. It's already inserted on other platforms and xmon recognizes it and identifies exception frames when showing stack traces. Signed-off-by: NTorez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 13 4月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This reverts commit 7545ba6f. It breaks eHEA among other issues
-
- 07 4月, 2010 22 次提交
-
-
由 Mahesh Salgaonkar 提交于
This patch ports the kprobe-based event tracer to powerpc. This patch is based on x86 port. This brings powerpc on par with x86. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Adds support for suspend/resume for VIO devices. This is needed for support for HMC initiated hibernation. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Akinobu Mita 提交于
Replace open-coded rate limiting logic with __ratelimit(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
The current setting for SECTION_SIZE_BITS is quite small compared to everyone else: arch/powerpc/include/asm/sparsemem.h:#define SECTION_SIZE_BITS 24 arch/sparc/include/asm/sparsemem.h:#define SECTION_SIZE_BITS 30 arch/ia64/include/asm/sparsemem.h:#define SECTION_SIZE_BITS (30) arch/s390/include/asm/sparsemem.h:#define SECTION_SIZE_BITS 28 arch/x86/include/asm/sparsemem.h:# define SECTION_SIZE_BITS 27 And it has proven to be an issue during boot on very large machines. If hotplug memory is enabled, drivers/base/memory.c does this: for (i = 0; i < NR_MEM_SECTIONS; i++) { if (!present_section_nr(i)) continue; err = add_memory_block(0, __nr_to_section(i), MEM_ONLINE, 0, BOOT); if (!ret) ret = err; } Which creates a sysfs directory for every 16MB of memory. As a result I'm seeing up to 30 minutes spent here during boot: c000000000248ee0 .__sysfs_add_one+0x28/0x128 c0000000002492a8 .sysfs_add_one+0x38/0x188 c000000000249c88 .create_dir+0x70/0x138 c000000000249d98 .sysfs_create_dir+0x48/0x78 c00000000032bad8 .kobject_add_internal+0x140/0x308 c00000000032beb4 .kobject_init_and_add+0x4c/0x68 c00000000046c2c0 .sysdev_register+0xa0/0x220 c00000000047b1dc .add_memory_block+0x124/0x1e8 c0000000008d1f28 .memory_dev_init+0xf4/0x168 c0000000008d1b64 .driver_init+0x50/0x64 c000000000890378 .do_basic_setup+0x40/0xd4 I assume there are some O(n^2) issues in sysfs as we add all the memory nodes. Bumping SECTION_SIZE_BITS to 256 MB drops the time to about 10 seconds and results in a much smaller /sys. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We have had issues in the past with ibm,os-term initiating shutdown of a partition. This is confusing to the user, especially if panic_timeout is non zero. The temporary fix was to avoid calling ibm,os-term if a panic_timeout was set and since we set it on every boot we basically never call ibm,os-term. An extended version of ibm,os-term has since been implemented which gives us the behaviour we want: "When the platform supports extended ibm,os-term behavior, the return to the RTAS will always occur unless there is a kernel assisted dump active as initiated by an ibm,configure-kernel-dump call." This patch checks for the ibm,extended-os-term property and calls ibm,os-term if it exists. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
I noticed /proc/sys/vm/zone_reclaim_mode was 0 on a ppc64 NUMA box. It gets enabled via this: /* * If another node is sufficiently far away then it is better * to reclaim pages in a zone before going off node. */ if (distance > RECLAIM_DISTANCE) zone_reclaim_mode = 1; Since we use the default value of 20 for REMOTE_DISTANCE and 20 for RECLAIM_DISTANCE it never kicks in. The local to remote bandwidth ratios can be quite large on System p machines so it makes sense for us to reclaim clean pagecache locally before going off node. The patch below sets a smaller value for RECLAIM_DISTANCE and thus enables zone reclaim. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Julia Lawall 提交于
Use set_cpus_allowed_ptr rather than set_cpus_allowed. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1,E2; @@ - set_cpus_allowed(E1, cpumask_of_cpu(E2)) + set_cpus_allowed_ptr(E1, cpumask_of(E2)) @@ expression E; identifier I; @@ - set_cpus_allowed(E, I) + set_cpus_allowed_ptr(E, &I) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Julia Lawall 提交于
Add an unlock before exiting the function. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * spin_lock_irq (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Julia Lawall 提交于
kasprintf combines kmalloc and sprintf, and takes care of the size calculation itself. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf(flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Julia Lawall 提交于
dlpar_free_cc_nodes frees its argument, so dlpar_online_cpu should not be called on the same value. Skip over the call to dlpar_online_cpu by jumping directly to out. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E2; @@ dlpar_free_cc_nodes(E) ... ( E = E2 | * E ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Jeff Mahoney 提交于
Commit 0119536c, which added the assembly version of strncmp to powerpc, mentions that it adds two instructions to the version from boot/string.S to allow it to handle len=0. Unfortunately, it doesn't always return 0 when that is the case. The length is passed in r5, but the return value is passed back in r3. In certain cases, this will happen to work. Otherwise it will pass back the address of the first string as the return value. This patch lifts the len <= 0 handling code from memcpy to handle that case. Reported by: Christian_Sellars@symantec.com Signed-off-by: NJeff Mahoney <jeffm@suse.com> CC: <stable@kernel.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 d binderman 提交于
Fix minor nits found by cppcheck [./arch/powerpc/platforms/powermac/low_i2c.c:594]: (style) The scope of the variable chans can be reduced [./arch/powerpc/platforms/powermac/low_i2c.c:594]: (style) The scope of the variable i can be reduced [./arch/powerpc/platforms/powermac/low_i2c.c:1260]: (style) Redundant condition. It is safe to deallocate a NULL pointer Signed-off-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
This avoids storing these registers in memory. CPU6 errata will still use the old way. Remove some G2 leftover accesses from 2.4 Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
Only the swap function cares about the ACCESSED bit in the pte. Do not waste cycles updateting ACCESSED when swap is not compiled into the kernel. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
Only modules will cause ITLB Misses as we always pin the first 8MB of kernel memory. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
This removes a couple of insn's from the TLB Miss handlers whithout changing functionality. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Jason Gunthorpe 提交于
Instead of referencing mem_map directly, use pfn_to_page. Otherwise the kernel crashes when trying to start userspace if ARCH_PFN_OFFSET is non-zero and CONFIG_BOOKE is not defined Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vaidyanathan Srinivasan 提交于
Add support for H_EM_GET_PARMS hcall that will return data related to power modes from the platform. Export the data directly to user space for administrative tools to interpret and use. cat /proc/powerpc/lparcfg will export power mode data Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 K.Prasad 提交于
Data address breakpoint exceptions are currently handled along with page-faults which require interrupts to remain in enabled state. Since exception handling for data breakpoints aren't pre-empt safe, we handle them separately. Signed-off-by: NK.Prasad <prasad@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
BenH: Added to vio_cmo_dev_attrs as well Provide a modalias entry for VIO devices in sysfs. I believe this was another initrd generation bugfix for anaconda. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We can't just clear the user read permission in book3e pte, because that will also clear supervisor read permission. This surely isn't desired. Fix the problem by adding the supervisor read back. BenH: Slightly simplified the ifdef and applied to ppc64 too Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Corey Minyard 提交于
The maple platform failed to load because it's firmware could not take a link address of 0x4000000. A new platform type with a link address of 0x400000 had to be created for the maple. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 03 4月, 2010 1 次提交
-
-
由 Frederic Weisbecker 提交于
Now that software events use perf_arch_fetch_caller_regs() too, we need the powerpc version to be always built. Fixes the following build error: (.text+0x3210): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x3324): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x33bc): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x33ec): undefined reference to `perf_arch_fetch_caller_regs' (.text+0xd4a0): undefined reference to `perf_arch_fetch_caller_regs' arch/powerpc/kernel/built-in.o:(.text+0xd528): more undefined references to `perf_arch_fetch_caller_regs' follow make[1]: *** [.tmp_vmlinux1] Error 1 make: *** [sub-make] Error 2 Reported-by: NMichael Ellerman <michael@ellerman.id.au> Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 27 3月, 2010 1 次提交
-
-
由 Roman Fietze 提交于
This patch avoids unbalanced enable/disable messages for the DMA interrupts when running the 5200 platform SCLPC/BestComm driver in DMA mode. Signed-off-by: NRoman Fietze <roman.fietze@telemotive.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 19 3月, 2010 3 次提交
-
-
由 FUJITA Tomonori 提交于
The description says: Cause IO segments sent to a device for DMA to be merged virtually by the IOMMU when they happen to have been allocated contiguously. This doesn't add pressure to the IOMMU allocator. However, some drivers don't support getting large merged segments coming back from *_map_sg(). Most drivers don't have this problem; it is safe to say Y here. It's out of date. Long ago, drivers didn't have a way to tell IOMMUs about their segment length limit (that is, the maximum segment length that they can handle). So IOMMUs merged as many segments as possible and gave too large segments to drivers. dma_get_max_seg_size() was introduced to solve the above problem. Device drives can use the API to tell IOMMU about the maximum segment length that they can handle. In addition, the default limit (64K) should be safe for everyone. So this config option seems to be unnecessary. Note that this config option just enables users to disable the virtual merging by default. Users can still disable the virtual merging by the boot parameter. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 FUJITA Tomonori 提交于
powerpc initializes swiotlb before parsing the kernel boot options so swiotlb options (e.g. specifying the swiotlb buffer size) are ignored. Any time before freeing bootmem works for swiotlb so this patch moves powerpc's swiotlb initialization after parsing the kernel boot options, mem_init (as x86 does). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: NBecky Bruce <beckyb@kernel.crashing.org> Tested-by: NAlbert Herranz <albert_herranz@yahoo.es> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Márton Németh 提交于
When printk() is disabled (CONFIG_PRINTK) at menu item General setup -> Configure standard kernel features (for small systems) -> Enable support for printk then there should be no printk() calls at all. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-