Device tree nodes are already treated as objects, and we already want to
expose them to userspace which is done using the /proc filesystem today.
Right now the kernel has to do a lot of work to keep the /proc view in
sync with the in-kernel representation. If device_nodes are switched to
be kobjects then the device tree code can be a whole lot simpler. It
also turns out that switching to using /sysfs from /proc results in
smaller code and data size, and the userspace ABI won't change if
/proc/device-tree symlinks to /sys/firmware/devicetree/base.

v7: Add missing sysfs_bin_attr_init()
v6: Add __of_add_property() early init fixes from Pantelis
v5: Rename firmware/ofw to firmware/devicetree
    Fix updating property values in sysfs
v4: Fixed build error on Powerpc
    Fixed handling of dynamic nodes on powerpc
v3: Fixed handling of duplicate attribute and child node names
v2: switch to using sysfs bin_attributes which solve the problem of
    reporting incorrect property size.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>

Commit fb4a9602 (arm64: kernel: fix per-cpu offset restore on
resume) uses per_cpu_offset() unconditionally during CPU wakeup,
however, this is only defined for the SMP case.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NDave P Martin <Dave.Martin@arm.com>

Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.

For example:
	gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.

This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We need to unmangle the full address, not just the register
number, and we also need to support the real indirect bit
being set for in-kernel uses.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]

The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]

As Ben suggested, the patch prints PHB diag-data with multiple
fields in one line and omits the line if the fields of that
line are all zero.

With the patch applied, the PHB3 diag-data dump looks like:

PHB3 PHB#3 Diag-data (Version: 1)

  brdgCtl:     00000002
  RootSts:     0000000f 00400000 b0830008 00100147 00002000
  nFir:        0000000000000000 0030006e00000000 0000000000000000
  PhbSts:      0000001c00000000 0000000000000000
  Lem:         0000000000100000 42498e327f502eae 0000000000000000
  InAErr:      8000000000000000 8000000000000000 0402030000000000 0000000000000000
  PE[  8] A/B: 8480002b00000000 8000000000000000

[ The current diag data is so big that it overflows the printk
  buffer pretty quickly in cases when we get a handful of errors
  at once which can happen. --BenH
]
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The PHB diag-data is important to help locating the root cause for
EEH errors such as frozen PE or fenced PHB. However, the EEH core
enables IO path by clearing part of HW registers before collecting
this data causing it to be corrupted.

This patch fixes this by dumping the PHB diag-data immediately when
frozen/fenced state on PE or PHB is detected for the first time in
eeh_ops::get_state() or next_error() backend.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The new ELFv2 little-endian ABI increases the stack redzone -- the
area below the stack pointer that can be used for storing data --
from 288 bytes to 512 bytes.  This means that we need to allow more
space on the user stack when delivering a signal to a 64-bit process.

To make the code a bit clearer, we define new USER_REDZONE_SIZE and
KERNEL_REDZONE_SIZE symbols in ptrace.h.  For now, we leave the
kernel redzone size at 288 bytes, since increasing it to 512 bytes
would increase the size of interrupt stack frames correspondingly.

Gcc currently only makes use of 288 bytes of redzone even when
compiling for the new little-endian ABI, and the kernel cannot
currently be compiled with the new ABI anyway.

In the future, hopefully gcc will provide an option to control the
amount of redzone used, and then we could reduce it even more.

This also changes the code in arch_compat_alloc_user_space() to
preserve the expanded redzone.  It is not clear why this function would
ever be used on a 64-bit process, though.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
CC: <stable@vger.kernel.org> [v3.13]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The branch target should be the func addr, not the addr of func_descr_t.
So using ppc_function_entry() to generate the right target addr.
Signed-off-by: NLiu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.

This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.

This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.
Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently we're storing a host endian RTAS token in
rtas_stop_self_args.token.  We then pass that directly to rtas.  This is
fine on big endian however on little endian the token is not what we
expect.

This will typically result in hitting:
	panic("Alas, I survived.\n");

To fix this we always use the stop-self token in host order and always
convert it to be32 before passing this to rtas.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit e504c909 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.

nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup.  In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.

The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.

Fixes: e504c909Reported-by: NKashyap Chamarty <kchamart@redhat.com>
Reported-by: NStefan Bader <stefan.bader@canonical.com>
Tested-by: NKashyap Chamarty <kchamart@redhat.com>
Tested-by: NAnthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address.  When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one.  On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.

As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio.  In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented.  The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer.  If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.

However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.

Fixes: f78146b0Signed-off-by: NAndrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org (3.5+)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 1fcf7ce0 (arm: kvm: implement CPU PM notifier) added
support for CPU power-management, using a cpu_notifier to re-init
KVM on a CPU that entered CPU idle.

The code assumed that a CPU entering idle would actually be powered
off, loosing its state entierely, and would then need to be
reinitialized. It turns out that this is not always the case, and
some HW performs CPU PM without actually killing the core. In this
case, we try to reinitialize KVM while it is still live. It ends up
badly, as reported by Andre Przywara (using a Calxeda Midway):

[    3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760
[    3.663897] unexpected data abort in Hyp mode at: 0xc067d150
[    3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0

The trick here is to detect if we've been through a full re-init or
not by looking at HVBAR (VBAR_EL2 on arm64). This involves
implementing the backend for __hyp_get_vectors in the main KVM HYP
code (rather small), and checking the return value against the
default one when the CPU notifier is called on CPU_PM_EXIT.
Reported-by: NAndre Przywara <osp@andrep.de>
Tested-by: NAndre Przywara <osp@andrep.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <rob.herring@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures,
with perf WARN_ON()s triggering. He also provided traces of the failures.

This is I think the relevant bit:

	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_disable: x86_pmu_disable
	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926156: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926158: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926159: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1
	>    pec_1076_warn-2804  [000] d...   147.926161: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926162: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926163: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926166: collect_events: Adding event: 1 (ffff880119ec8800)

So we add the insn:p event (fd[23]).

At this point we should have:

  n_events = 2, n_added = 1, n_txn = 1

	>    pec_1076_warn-2804  [000] d...   147.926170: collect_events: Adding event: 0 (ffff8800c9e01800)
	>    pec_1076_warn-2804  [000] d...   147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00)

We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]).
These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so
that's not visible.

	group_sched_in()
	  pmu->start_txn() /* nop - BP pmu */
	  event_sched_in()
	     event->pmu->add()

So here we should end up with:

  0: n_events = 3, n_added = 2, n_txn = 2
  4: n_events = 4, n_added = 3, n_txn = 3

But seeing the below state on x86_pmu_enable(), the must have failed,
because the 0 and 4 events aren't there anymore.

Looking at group_sched_in(), since the BP is the leader, its
event_sched_in() must have succeeded, for otherwise we would not have
seen the sibling adds.

But since neither 0 or 4 are in the below state; their event_sched_in()
must have failed; but I don't see why, the complete state: 0,0,1:p,4
fits perfectly fine on a core2.

However, since we try and schedule 4 it means the 0 event must have
succeeded!  Therefore the 4 event must have failed, its failure will
have put group_sched_in() into the fail path, which will call:

	event_sched_out()
	  event->pmu->del()

on 0 and the BP event.

Now x86_pmu_del() will reduce n_events; but it will not reduce n_added;
giving what we see below:

 n_event = 2, n_added = 2, n_txn = 2

	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_enable: x86_pmu_enable
	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926179: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926181: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926182: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926186: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state:   1->0 tag: 1 config: 1 (ffff880119ec8800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0

So the problem is that x86_pmu_del(), when called from a
group_sched_in() that fails (for whatever reason), and without x86_pmu
TXN support (because the leader is !x86_pmu), will corrupt the n_added
state.
Reported-and-Tested-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Read-only large sptes can be created due to read-only faults as
follows:

- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).

Fix by dropping large spte when necessary.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This silences build warnings about unexported variables and functions.
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20140209215644.GA30339@www.outflux.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Include kASLR offset in VMCOREINFO ELF notes to assist in debugging.

[ hpa: pushing this for v3.14 to avoid having a kernel version with
  kASLR where we can't debug output. ]
Signed-off-by: NEugene Surovegin <surovegin@google.com>
Link: http://lkml.kernel.org/r/20140123173120.GA25474@www.outflux.netSigned-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This patch updates the CBOX PMU filters mapping tables for SNB-EP
and IVT (model 45 and 62 respectively).

The NID umask always comes in addition to another umask.
When set, the NID filter is applied.

The current mapping tables were missing some code/umask
combinations to account for the NID umask. This patch
fixes that.

Cc: mingo@elte.hu
Cc: ak@linux.intel.com
Reviewed-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219131018.GA24475@quadSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.

This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.

Cc: pbonzini@redhat.com
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Suggested-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

When using BTS on Core i7-4*, I get the below kernel warning.

$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.

Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317920] Do you have a strange power saving mode enabled?

Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317945] Dazed and confused, but trying to continue

Make intel_pmu_handle_irq() take the full exit path when returning early.

Cc: eranian@google.com
Cc: peterz@infradead.org
Cc: mingo@kernel.org
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC
base frequency in the platform data in case of build w/o CONFIG_OF.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

With this change the board needs to set up single clock object, users of
this clock will get correct frequency automatically.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Commit f615136c ("xtensa: add SMP support") added "select
USE_GENERIC_SMP_HELPERS". But the Kconfig symbol USE_GENERIC_SMP_HELPERS
was already removed in v3.13, so that select is a nop. Drop it.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

The toolchain for xtensa FSF core never supported GPIO32, drop it on the
linux side too.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NBaruch Siach <baruch@tkos.co.il>

This fixes panic when booting on machine with more than 128M memory
passed from the bootloader.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

The boundary size for iommu_area_alloc() is currently set to a constant
value. This is wrong, we shouldn't use a constant value but rather the
return value of dma_get_seg_boundary(), since a device driver can override
the default.
Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix stupid typo.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Unlike other build products in the Linux kernel, there is no 'make
*install' mechanism to put devicetree blobs in a standard place.

This commit adds a new 'dtbs_install' make target which copies all of
the dtbs into the INSTALL_DTBS_PATH directory. INSTALL_DTBS_PATH can be
set before calling make to change the default install directory. If not
set then it defaults to:

	$INSTALL_PATH/dtbs/$KERNELRELEASE.

This is done to keep dtbs from different kernel versions separate until
things have settled down.  Once the dtbs are stable, and not so strongly
linked to the kernel version, the devicetree files will most likely move
to their own repo.  Users will need to upgrade install scripts at that
time.

v7: (reworked by Grant Likely)
- Moved rules from arch/arm/Makefile to arch/arm/boot/dts/Makefile so
  that each dtb install could have a separate target and be reported as
  part of the make output.
- Fixed dependency problem to ensure $KERNELRELEASE is calculated before
  attempting to install
- Removed option to call external script. Copying the files should be
  sufficient and a build system can post-process the install directory.
  Despite the fact an external script is used for installing the kernel,
  I don't think that is a pattern that should be encouraged. I would
  rather see buildroot type tools post process the install directory to
  rename or move dtb files after installing to a staging directory.
  - Plus it is easy to add a hook after the fact without blocking the
    rest of this feature.
- Move the helper targets into scripts/Makefile.lib with the rest of the
  common dtb rules
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>

The address translation of a PCI node don't require anymore the PCI
support in the kernel. This translation is mandatory to be able to
read the SoC ID which is stored in the PCI controller of the mvebu
SoCs.

This patch selects the symbol needed to get only this translation for
all the mvebu platforms.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

The testcase data is usable by any platform. This patch moves it into
the drivers/of directory so it can be included by any architecture.

Using the test cases requires manually adding #include <testcases.dtsi>
to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not
pretty though. A useful project would be to make the testcase code
easier to execute.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

While copy_to/from_user_page() users are uncommon, there is one in
drivers/staging/lustre/lustre/libcfs/linux/linux-curproc.c which leads
to the following:

ERROR: "sparc32_cachetlb_ops" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined!

during routine allmodconfig build coverage.  The reason this happens
is as follows:

In arch/sparc/include/asm/cacheflush_32.h we have:

 #define flush_cache_page(vma,addr,pfn) \
        sparc32_cachetlb_ops->cache_page(vma, addr)

 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
        do {                                                    \
                flush_cache_page(vma, vaddr, page_to_pfn(page));\
                memcpy(dst, src, len);                          \
        } while (0)
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
        do {                                                    \
                flush_cache_page(vma, vaddr, page_to_pfn(page));\
                memcpy(dst, src, len);                          \
        } while (0)

However, sparc32_cachetlb_ops isn't exported and hence the error.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In arch/sparc/Kernel/Makefile, we see:

   obj-$(CONFIG_SPARC64)   += jump_label.o

However, the Kconfig selects HAVE_ARCH_JUMP_LABEL unconditionally
for all SPARC.  This in turn leads to the following failure when
doing allmodconfig coverage builds:

kernel/built-in.o: In function `__jump_label_update':
jump_label.c:(.text+0x8560c): undefined reference to `arch_jump_label_transform'
kernel/built-in.o: In function `arch_jump_label_transform_static':
(.text+0x85cf4): undefined reference to `arch_jump_label_transform'
make: *** [vmlinux] Error 1

Change HAVE_ARCH_JUMP_LABEL to be conditional on SPARC64 so that it
matches the Makefile.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Intel Baytrail is based on Silvermont core so MSR_FSB_FREQ[2:0] == 0 means
that the CPU reference clock runs at 83.3MHz. Add this missing frequency to
the table.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1392810750-18660-2-git-send-email-mika.westerberg@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

If we cannot calibrate TSC via MSR based calibration
try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that
to the caller. This value gets then propagated further to clockevents
code resulting division by zero oops like the one below:

 divide error: 0000 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.13.0+ #47
 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000
 RIP: 0010:[<ffffffff810aec14>]  [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0
 RSP: 0000:ffff880075507e58  EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
 RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be
 R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008
 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0
 Stack:
  ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88
  ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168
  ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000
 Call Trace:
  [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30
  [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0
  [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8
  [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0
  [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205
  [<ffffffff8177c910>] ? rest_init+0x90/0x90
  [<ffffffff8177c91e>] kernel_init+0xe/0x120
  [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0
  [<ffffffff8177c910>] ? rest_init+0x90/0x90

Prevent this from happening by:
 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero
    if it fails.
 2) Check this return value in native_calibrate_tsc() and in case of zero
    fallback to use normal non-MSR based calibration.

[mw: Added subject and changelog]
Reported-and-tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.comSigned-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix tegra_init_cache() to check whether the system has a PL310 cache
before touching the PL310 registers. This prevents access to non-existent
registers on Tegra114 and later.

Note for stable kernels:
In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c.

Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The number of the head specifies the index of the display controller
unit and is required to properly configure outputs so that they receive
video data from the correct source.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM,
we will get the following link error.

  LD      init/built-in.o
arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait':
platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm'
platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm'
arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init':
platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit'
make[1]: *** [vmlinux] Error 1

Since pm-imx6q.c has been a collection of library functions that access
CCM low-power registers used by not only suspend but also cpuidle and
other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix
above error.
Reported-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: stable@vger.kernel.org
Acked-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>