- 19 8月, 2014 12 次提交
-
-
由 Lars-Peter Clausen 提交于
There were never any actual users of this in upstream and by we have with regmap a replacement in place, which should be used by new drivers. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
So far regmap is only automatically initialized for CODECs. Now that we have the infrastructure in place to let components have DAPM widgets and controls that want to use the generic regmap based IO also make sure to automatically initialize regmap for all components. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
The lookup of CPU and CODEC DAIs is fairly similar and can easily be consolidated into a single helper function. There are two main differences in the current implementation of the CPU and CODEC DAI lookup: 1) CPU DAIs can be looked up by the DAI name alone and do not necessarily require a component name/of_node. 2) The CODEC DAI search only considers DAIs from CODEC components. For 1) the new helper function will allow to lookup DAIs without providing a component name or of_node, but since snd_soc_register_card() already rejects CODEC DAI link components without neither a of_node or a name we'll never get into the situation where we try to lookup a CODEC DAI without a name/of_node. For 2) the new helper function just always considers all components. Componentization is now at a point where it is possible to register a CODEC as a snd_soc_component rather than a snd_soc_codec, by considering DAIs from all components it is possible to use such a CODEC in a DAI link. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
CPU and CODEC DAI works exactly the same way. There is already a helper function for CODEC DAI removal, use that one as well for CPU DAI removal. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Currently when a DAI has no CODEC associated to it the reference on the module containing the DAI driver is increased when the DAI is probed and decrease when the DAI is removed. For DAIs with CODECs the module reference count was already incremented when the CODEC is probed. Now that all components have their module reference count incremented when they are probed and all DAIs do have a component it is possible to remove the module reference counting on DAI probe and removal. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Having the check in a centralized place makes the code a bit cleaner and shorter. Note: There is a slight semantic change in this patch. soc_probe_aux_dev() will no longer return -EBUSY if the AUX dev has already been probed before. This is fine though since it will simply do nothing in that case and return success. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Given that the component is the containing structure it makes more sense to pass the component rather than the DAPM context to the AUX dev init callback. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
This patch makes it possible to register arbitrary components as a AUX dev for a card. This was previously only possible for CODEC components. With componentization having made it possible for components to have DAPM contexts and controls there is no reason why AUX devs should be artificially limited to snd_soc_codec devices. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Now that we have a unified probe and remove path make sure to call them for all components. soc_{probe,remove}_component are responsible for setting up the DAPM context for the component, initialize the component prefix, manage the debugfs entries as well as do the registration of table based controls and DAPM elements. They also call the component drivers probe and remove callbacks. This patch makes these things available for generic snd_soc_component drivers rather than only having them for snd_soc_codec and snd_soc_platform drivers. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
There are some place in the ASoC core that expect rtd->codec to be non NULL (mainly CODEC specific sysfs files). With componentization going forward rtd->codec might be NULL in some cases. This patch prepares the core for this by not registering CODEC specific sysfs files if rtd->codec is NULL. sysfs file removal does not need to be conditionalized as it handles the removal of non-existing files just fine. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
The platform and CODEC probe and remove code is now largely identical. This patch consolidates it at the component level. The resulting code is slightly larger due to all the boiler plate code setting up the indirection for the table based control and DAPM registration. Once all drivers have been update to no longer use the snd_soc_codec_driver and snd_soc_platform_driver specific fields for this the indirection can be removed again. This patch contains two noteworthy hacks that are only meant to be temporary to be able to update drivers and the core in separate incremental patches. The first hack is related to that some DPCM platforms expect that the DAPM widgets for the DAIs of a snd_soc_component are created in the DAPM context of the snd_soc_platform that has the same parent device. For handling this the steal_sibling_dai_widgets attribute is introduced. It gets set for snd_soc_platforms that register DAPM elements. When creating the DAI widgets for a component this flag is checked and if it is found on one of the siblings the component will not create any DAI widgets in its own DAPM context. If the attribute is set on a platform it will look for siblings components and create DAI widgets for them in its own context. The fix for this will be to update the offending drivers to only register a single component rather than two. The second hack deals with the fact that the ASoC card suspend and resume code still needs a list of CODECs that have been registered for the card. To handle this the generic probe and remove path have a check to see if the component is CODEC and if yes add/remove it to the card's CODEC list. While it is possible to clean up the suspend/resume code to not need the CODEC list anymore this is a bit of a chicken and egg problem since it will become easier to clean up the suspend/resume code once there is a unified component layer. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
The debugfs registration is mostly identical between platforms and CODECs. This patches consolidates the two implementations at the component level. Unfortunately there are still a couple of CODEC specific debugfs files that are related to legacy ASoC IO that need to be registered. For this a new callback is added to the component struct that will be initialized when a CODEC is registered and will be used to register the CODEC specific files. Once there are no drivers left using legacy IO this can be removed again. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 14 8月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Conexnat HD-audio driver has a workaround for cx5051 (aka CX20561) chip to add fake mute controls to each amp (commit 3868137e). This implies the minimum-as-mute TLV bit in TLV for each corresponding control. Meanwhile we build the virtual master from these, but the TLV bit is missing, even though the slaves have it. This patch simply adds the missing TLV_DB_SCALE_MUTE bit for vmaster, as already done in patch_sigmatel.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 8月, 2014 1 次提交
-
-
由 Benoit Taine 提交于
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 10 8月, 2014 4 次提交
-
-
由 Takashi Iwai 提交于
CA0132 driver tries to reload the firmware at resume. Usually this works since the firmware loader core caches the firmware contents by itself. However, if the driver failed to load the firmwares (e.g. missing files), reloading the firmware at resume goes through the actual file loading code path, and triggers a kernel WARNING like: WARNING: CPU: 10 PID:11371 at drivers/base/firmware_class.c:1105 _request_firmware+0x9ab/0x9d0() For avoiding this situation, this patch makes CA0132 skipping the f/w loading at resume when it failed at probe time. Reported-and-tested-by: NJanek Kozicki <cosurgi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Gabriele Mazzotta 提交于
If nid 0x15 (Headphone Playback Switch) is in D3 and headphones are plugged in when the laptop reboots, a pop noise is generated. Prevent this by keeping nid 0x15 in D0 when headphones are plugged in. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Gabriele Mazzotta 提交于
If the laptop is powered on with a jack plugged in, independently on what is plugged, the jack is treated as a microphone jack. Initialize the capture source so that by default jacks are treated as headphones jacks. This will also prevent pop noises on boot in case headphones are plugged in since setting/unsetting mic-in as input source causes a pop noise. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
The BOSS ME-25 turns out not to have any useful descriptors in its MIDI interface, so its needs a quirk entry after all. Reported-and-tested-by: NKees van Veen <kees.vanveen@gmail.com> Fixes: 8e5ced83 ("ALSA: usb-audio: remove superfluous Roland quirks") Cc: <stable@vger.kernel.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 8月, 2014 3 次提交
-
-
由 Takashi Iwai 提交于
CMI8888 codec chip has a boost amp (only) on the headphone pin, and this confuses the generic parser, which tends to pick up the most outside amp. This results in the wrong volume setup, as the driver complains like: hda_codec: Mismatching dB step for vmaster slave (-100!=1000) For avoiding this problem, rule out the amp on NID 0x10 and create "Headphone Amp" volume control manually instead. Note that this patch still doesn't fix all problems yet. The sound output from the line out seems still too low. It will be fixed in another patch (hopefully). Reported-and-tested-by: NVincent Lejeune <vljn@ovi.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ASUS Phoebus with CMI8888 HD-audio chip (PCI id 13f6:5011) doesn't work with HD-audio driver as is because of some weird nature. For making DMA properly working, we need to disable MSI. The position report buffer doesn't work, thus we need to force reading LPIB instead. And yet, the codec CORB/RIRB communication gives errors unless we disable the snooping (caching). In this patch, all these workarounds are added as a quirk for the device. The HD-audio *codec* chip needs yet another workaround, but it'll be provided in the succeeding patch. Reported-and-tested-by: NVincent Lejeune <vljn@ovi.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
It will be recording voice delay for resume back recording for Headset Mic. This alc286 will quickly open Headset Mic, to prevent avoid recording files are missing. The issue was fixed. This is follow ALC286 programing guide. [fix build error, add static and renamed the function by tiwai] Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 8月, 2014 6 次提交
-
-
由 Himangi Saraogi 提交于
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for wanc_info and wavnc_port_info. A simplified version of the Coccinelle semantic patch that finds the case is: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Acked-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Himangi Saraogi 提交于
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for uart401_devc. The following Coccinelle semantic patch detects the case. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Acked-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adam Goode 提交于
Signed-off-by: NAdam Goode <agoode@google.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adam Goode 提交于
sound/usb/card.c registers USB suspend and resume but did not previously kill the input URBs. This means that USB MIDI devices left open across suspend/resume had non-functional input (output still usually worked, but it looks like that is another issue). Before this change, we would get ESHUTDOWN for each of the input URBs at suspend time, killing input. Signed-off-by: NAdam Goode <agoode@google.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Himangi Saraogi 提交于
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for pss_mixerdata and pss_confdata. The following Coccinelle semantic patch is used to make the change. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Acked-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Himangi Saraogi 提交于
This typedef is unnecessary and should just be removed as they are never used. The following Coccinelle semantic patch detects the case. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Acked-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 8月, 2014 1 次提交
-
-
由 Takashi Sakamoto 提交于
Use %d for loop counter and %X for device capabilities. This is a supplemental patch for Hans Wennborg's patch. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 8月, 2014 12 次提交
-
-
由 Mark Brown 提交于
Since we pass the port number through file private data for debugfs we cast it to and from a pointer so use uintptr_t in order to ensure that the types are compatible, avoiding warnings on 64 bit platforms where pointers are 64 bit and unsigned integers 32 bit. Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Peter Ujfalusi 提交于
In order to be able to use simple-card with McASP on TI SoC based boards we need to be able to select the McASP via menuconfig. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Nicolin Chen 提交于
sound/soc/fsl/fsl_asrc.c:250 fsl_asrc_config_pair() warn: variable dereferenced before check 'config' (see line 243) git remote add next git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git remote update next git checkout 3117bb31 vim +/config +250 sound/soc/fsl/fsl_asrc.c 237 */ 238 static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) 239 { 240 struct asrc_config *config = pair->config; 241 struct fsl_asrc *asrc_priv = pair->asrc_priv; 242 enum asrc_pair_index index = pair->index; @243 u32 inrate = config->input_sample_rate, indiv; 244 u32 outrate = config->output_sample_rate, outdiv; 245 bool ideal = config->inclk == INCLK_NONE; 246 u32 clk_index[2], div[2]; 247 int in, out, channels; 248 struct clk *clk; 249 @250 if (!config) { 251 pair_err("invalid pair config\n"); 252 return -EINVAL; 253 } Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Nicolin Chen 提交于
The patch 3117bb31: "ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers" from Jul 29, 2014, leads to the following Smatch complaint: sound/soc/fsl/fsl_asrc_dma.c:304 fsl_asrc_dma_shutdown() warn: variable dereferenced before check 'pair' (see line 302) sound/soc/fsl/fsl_asrc_dma.c 301 struct fsl_asrc_pair *pair = runtime->private_data; 302 struct fsl_asrc *asrc_priv = pair->asrc_priv; ^^^^^^^^^^^^^^^ Dereference. 303 304 if (pair && asrc_priv->pair[pair->index] == pair) ^^^^ Check. 305 asrc_priv->pair[pair->index] = NULL; 306 So we just let the driver check pair before using it. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Mark Brown 提交于
Negating ADAU1977_BLOCK_POWER_SAI_LDO_EN creates an unsigned long constant with all bits set which on 64 bit architectures needs to be truncated to an unsigned int, generating a warning. Add an explicit cast since we know this is OK. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NLars-Peter Clausen <lars@metafoo.de>
-
由 Clemens Ladisch 提交于
Just add the PCI ID for the STX II. It appears to work the same as the STX, except for the addition of the not-yet-supported daughterboard. Tested-by: NMario <fugazzi99@gmail.com> Tested-by: Ncorubba <corubba@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hans Wennborg 提交于
Signed-off-by: NHans Wennborg <hans@hanshq.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hans Wennborg 提交于
Signed-off-by: NHans Wennborg <hans@hanshq.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Libin Yang 提交于
This patch adds codec ID (0x80862883) and module alias for Braswell display codec. Signed-off-by: NLibin Yang <libin.yang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Libin Yang 提交于
Add HD Audio Device PCI ID for the Intel Braswell platform. It is an HDA Intel PCH controller. AZX_DCAPS_ALIGN_BUFSIZE is not necessary for this controller. Signed-off-by: NLibin Yang <libin.yang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul S McSpadden 提交于
Original patch fixed the original problem, but the sound was far too low for most users. This patch references a compare matrix to allow the volume levels to act normally. I personally tested this patch myself, and volume levels returned to normal. Please see this discussion for more details: https://bugzilla.kernel.org/show_bug.cgi?id=65251Signed-off-by: NPaul S McSpadden <fisch602@gmail.com> Cc: <stable@vger.kernel.org> [v3.14+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michał Mirosław 提交于
This improves messages from commit 80acefff. Cc: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-