Most if not all x86 platforms have an RTC device, but sometimes the RTC
is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI:

    http://bugzilla.kernel.org/show_bug.cgi?id=11580
    https://bugzilla.redhat.com/show_bug.cgi?id=451188

It's best if we can discover the RTC via PNP because then we know
which flavor of device it is, where it lives, and which IRQ it uses.

But if we can't, we should register a platform device using the
compiled-in RTC_PORT/RTC_IRQ resource assumptions.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Reported-by: NRik Theys <rik.theys@esat.kuleuven.be>
Reported-by: shr_msn@yahoo.com.tw
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver
in drivers/rtc/rtc-cmos.c.

This removes the ordering constraint between the module_init(acpi_rtc_init)
and the cmos_do_probe() code that depends on it.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits)
  svcrdma: Fix IRD/ORD polarity
  svcrdma: Update svc_rdma_send_error to use DMA LKEY
  svcrdma: Modify the RPC reply path to use FRMR when available
  svcrdma: Modify the RPC recv path to use FRMR when available
  svcrdma: Add support to svc_rdma_send to handle chained WR
  svcrdma: Modify post recv path to use local dma key
  svcrdma: Add a service to register a Fast Reg MR with the device
  svcrdma: Query device for Fast Reg support during connection setup
  svcrdma: Add FRMR get/put services
  NLM: Remove unused argument from svc_addsock() function
  NLM: Remove "proto" argument from lockd_up()
  NLM: Always start both UDP and TCP listeners
  lockd: Remove unused fields in the nlm_reboot structure
  lockd: Add helper to sanity check incoming NOTIFY requests
  lockd: change nlmclnt_grant() to take a "struct sockaddr *"
  lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses
  lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET
  lockd: Support non-AF_INET addresses in nlm_lookup_host()
  NLM: Convert nlm_lookup_host() to use a single argument
  svcrdma: Add Fast Reg MR Data Types
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (26 commits)
  mfd: Fix warning in WM8350
  mfd: Add placeholders for WM8350 client devices
  da903x: add regulator support for DA9030/DA9034
  mfd: Add WM8350 subdevice registration helper
  regulator: Add WM8350 regulator support
  mfd: Add WM8350 interrupt support
  mfd: Add initialisation callback for WM8350
  mfd: Add GPIO pin configuration support for WM8350
  mfd: Add I2C control support for WM8350
  mfd: Core support for the WM8350 AudioPlus PMIC
  mfd: Add WM8350 watchdog register definitions
  mfd: Add WM8350 RTC register definitions
  mfd: Add WM8350 comparator register definitions
  mfd: Add WM8350 PMU register definitions
  mfd: Add WM8350 PMIC register definitions
  mfd: Add WM8350 GPIO register definitions
  mfd: Add WM8350 audio register definitions
  regulator: Export regulator name via sysfs
  regulator: Add WM8400 regulator support
  mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot:
  raid, fastboot: hide RAID autodetect option if MD is compiled as a module
  raid: make RAID autodetect default a KConfig option
  warning: fix init do_mounts_md c
  fastboot: make the RAID autostart code print a message just before waiting
  fastboot: make the raid autodetect code wait for all devices to init
  fastboot: Fix bootgraph.pl initcall name regexp
  fastboot: fix issues and improve output of bootgraph.pl
  Add a script to visualize the kernel boot process / time

This reverts commit c9e587ab, and the
subsequent commits that fixed it up:

 - afa9b649 "fbcon: prevent cursor disappearance after switching to 512
   character font"

 - d850a2fa "vt/fbcon: fix background color on line feed"

 - 7fe3915a "vt/fbcon: update scrl_erase_char after 256/512-glyph font
   switch"

by request of Alan Cox. Quoth Alan:
  "Unfortunately it's wrong and its been causing breakages because
   various apps like ncurses expect our previous (and correct)
   behaviour."

Alexander sent out a similar patch.
Requested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Tested-by: NJan Engelhardt <jengelh@medozas.de>
Cc: Alexander V. Lukyanov <lav@netis.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  qlge: Fix page size ifdef test.
  net: Rationalise email address: Network Specific Parts
  dsa: fix compile bug on s390
  netns: mib6 section fixlet
  enic: Fix Kconfig headline description
  de2104x: wrong MAC address fix
  s390: claw compile fixlet
  net: export genphy_restart_aneg
  cxgb3: extend copyrights to 2008
  cxgb3: update driver version
  net/phy: add missing kernel-doc
  pktgen: fix skb leak in case of failure
  mISDN/dsp_cmx.c: fix size checks
  misdn: use nonseekable_open()
  net: fix driver build errors due to missing net/ip6_checksum.h include

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
..
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
..>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For some m68k configs, I get:

| net/rfkill/rfkill-input.c: In function 'rfkill_start':
| net/rfkill/rfkill-input.c:208: error: dereferencing pointer to incomplete type

As the incomplete type is `struct task_struct', including <linux/sched.h> fixes
it.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ERROR: "nvram_read_byte" [drivers/scsi/atari_scsi.ko] undefined!
ERROR: "nvram_check_checksum" [drivers/scsi/atari_scsi.ko] undefined!
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If CONFIG_PROC_FS is not set, I get:

| arch/m68k/kernel/ints.c:433: error: redefinition of 'init_irq_proc'
| include/linux/interrupt.h:438: error: previous definition of 'init_irq_proc' was here

This was introduced by commit 6168a702
("Declare init_irq_proc before we use it."), which replaced the #ifdef
protection of the init_irq_proc() call by a static inline dummy if
CONFIG_PROC_FS is not set.

Make init_irq_proc() depend on CONFIG_PROC_FS to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the no longer used m68k PCI code.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the Hades support that was marked as BROKEN 5 years ago.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kill compiler warnings related to printf() formats in the input drivers for
various HP9000 machines, which are shared between PA-RISC (suseconds_t is int)
and m68k (suseconds_t is long). As both are 32-bit, it's safe to cast to int.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several multi-bus subsystems:

| include/linux/ssb/ssb.h: In function 'ssb_dma_mapping_error':
| include/linux/ssb/ssb.h:430: error: implicit declaration of function 'pci_dma_mapping_error'
| include/linux/ssb/ssb.h: In function 'ssb_dma_map_single':
| include/linux/ssb/ssb.h:444: error: implicit declaration of function 'pci_map_single'
| include/linux/ssb/ssb.h: In function 'ssb_dma_unmap_single':
| include/linux/ssb/ssb.h:458: error: implicit declaration of function 'pci_unmap_single'
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_cpu':
| include/linux/ssb/ssb.h:475: error: implicit declaration of function 'pci_dma_sync_single_for_cpu'
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_device':
| include/linux/ssb/ssb.h:493: error: implicit declaration of function 'pci_dma_sync_single_for_device'

or legacy drivers:

| drivers/net/hp100.c: In function 'pdl_map_data':
| drivers/net/hp100.c:291: error: implicit declaration of function 'pci_map_single'
| drivers/net/hp100.c: In function 'hp100_probe1':
| drivers/net/hp100.c:707: error: implicit declaration of function 'pci_alloc_consistent'
| drivers/net/hp100.c:782: error: implicit declaration of function 'pci_free_consistent'
| drivers/net/hp100.c: In function 'hp100_clean_txring':
| drivers/net/hp100.c:1614: error: implicit declaration of function 'pci_unmap_single'

and

| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_allocate_scb':
| drivers/scsi/aic7xxx_old.c:2573: error: implicit declaration of function 'pci_alloc_consistent'
| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_done':
| drivers/scsi/aic7xxx_old.c:2697: error: implicit declaration of function 'pci_unmap_single'
| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_handle_seqint':
| drivers/scsi/aic7xxx_old.c:4275: error: implicit declaration of function 'pci_map_single'
| drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_free':
| drivers/scsi/aic7xxx_old.c:8460: error: implicit declaration of function 'pci_free_consistent'

rely on PCI DMA operations to be always available.

Add #include <asm-generic/pci-dma-compat.h> to <asm/pci.h> to make them happy.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_cpu':
| include/linux/ssb/ssb.h:517: error: implicit declaration of function 'dma_sync_single_range_for_cpu'
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_device':
| include/linux/ssb/ssb.h:538: error: implicit declaration of function 'dma_sync_single_range_for_device'

Add the missing dma_sync_single_range_for_{cpu,device}(), and remove the
`inline' for the non-static function dma_sync_single_for_device().
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against
concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt
yet, the spinlock calls tend to get optimized away, but not for all
configurations, causing in some rare cases:

| ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined!
| ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined!

Add the spinlock to the Atari core code to avoid this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If CONFIG_VT=n, I get:

| arch/m68k/atari/built-in.o: In function `atari_kbd_translate':
| arch/m68k/atari/atakeyb.c:640: undefined reference to `shift_state'

Just remove atari_kbd_translate(), as it's unused.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

| ERROR: "key_maps" [drivers/input/keyboard/amikbd.ko] undefined!

Export key_maps in the Amiga core code, as its defined in an autogenerated
file (drivers/char/defkeymap.c)
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently Sun 3 support is the first platform option, as the Sun 3 MMU is
incompatible with standard Motorola MMUs. However, this means that
`allmodconfig' enables support for Sun 3, and thus disables support for all
other platforms.

Reverse the logic and move Sun 3 last, so `allmodconfig' enables all
platforms except for Sun 3, increasing compile-coverage.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add .note.gnu.build-id to init data so it's discarded at boot.

[Andreas Schwab] Use NOTES macro
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Put .bss at the end of the data section
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes the oops and backtrace code to use the new `%pS' printk()
extension to print out symbols rather than manually calling print_symbol.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch changes m68k to use the new bcd2bin/bin2bcd functions instead
of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

It also remove local bcd2bin/bin2bcd implementations
in favor of the global ones.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Splitting the 8250 code back up to avoid a clash with the NR_IRQS removal
patch introduced a last minute bug. Put back the additional needed lines
for the old lock init
Signed-off-by: NAlan Cox <alan@redhat.com>
[ Ingo also reports that this can cause a spontaneous reboot crash with
  certain configs, and sends in an identical patch ]
Tested-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This ASIC does support all page sizes. For 4k and 8k page size the TX
control block needs an external scatter gather list.  For page sizes
larger than 8k the max frags is satisfied by the original TX control
block.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean up the various different email addresses of mine listed in the code
to a single current and valid address. As Dave says his network merges
for 2.6.28 are now done this seems a good point to send them in where
they won't risk disrupting real changes.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

git commit 45cec1ba
"dsa: Need to select PHYLIB." causes this build bug on s390:

drivers/built-in.o: In function `phy_stop_interrupts':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:631: undefined reference to `free_irq'
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:646: undefined reference to `enable_irq'
drivers/built-in.o: In function `phy_start_interrupts':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:601: undefined reference to `request_irq'
drivers/built-in.o: In function `phy_interrupt':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:528: undefined reference to `disable_irq_nosync'
drivers/built-in.o: In function `phy_change':
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:674: undefined reference to `enable_irq'
/home/heicarst/linux-2.6/drivers/net/phy/phy.c:692: undefined reference to `disable_irq'

PHYLIB has alread a depend on !S390, however select PHYLIB at DSA overrides
that unfortunately. So add a depend on !S390 to DSA as well.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  LD      net/ipv6/ipv6.o
WARNING: net/ipv6/ipv6.o(.text+0xd8): Section mismatch in reference from the function inet6_net_init() to the function .init.text:ipv6_init_mibs()
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I don't think the enic driver has anything to do with Mark Everett
(http://en.wikipedia.org/wiki/A_Man_Called_E).  Fix the Kconfig
description.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The de2104x returns sometimes a wrong MAC address. The wrong one is
like the original one, but it comes with an one byte shift. I found
this bug on an older alpha ev5 cpu. More details are available in Gentoo
bugreport #240718.

It seems the hardware is sometimes a little bit too slow for an
immediate access. This patch solves the problem by introducing a small
udelay.
Signed-off-by: NMartin Langer <martin-langer@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following build error caused by
commit ed94493f
(mv643xx_eth: convert to phylib):

<--  snip  -->

...
  Building modules, stage 2.
  MODPOST 1280 modules
ERROR: "genphy_restart_aneg" [drivers/net/mv643xx_eth.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update copyright banner to 2008.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a field to the driver versioning info.
Update version to 1.1.0.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix kernel-doc warning, missing description:

Warning(lin2627-g3-kdocfixes//drivers/net/phy/mdio_bus.c:63): No description found for parameter 'd'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Seems that skb goes into void unless something magic happened
in pskb_expand_head in case of failure.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The checks for ensuring that the array indices are inside the range
were flipped.
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver just sets ->llseek to NULL.  It should also clear FMODE_LSEEK to
tell the VFS that seeks are not supported.

Pointed out by Christoph Hellwig.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  2.6.27-git2 kernel build fails with allyesconfig on powerpc with 
build error 

<introduced by commit 01f2e4ea> 

CC    drivers/net/enic/enic_main.o
drivers/net/enic/enic_main.c: In function ‘enic_queue_wq_skb_tso’:
drivers/net/enic/enic_main.c:576: error: implicit declaration of function ‘csum_ipv6_magic’
make[3]: *** [drivers/net/enic/enic_main.o] Error 1

<introduced by commit c4e84bde>

drivers/net/qlge/qlge_main.c: In function ‘ql_tso’:
drivers/net/qlge/qlge_main.c:1862: error: implicit declaration of function ‘csum_ipv6_magic’
make[3]: *** [drivers/net/qlge/qlge_main.o] Error 1
  
<introduced by commit 95252236>

drivers/net/jme.c: In function ‘jme_tx_tso’:
drivers/net/jme.c:1784: error: implicit declaration of function ‘csum_ipv6_magic’
make[2]: *** [drivers/net/jme.o] Error 1
Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>