This patch fixes sparse warnings in the qnx4fs (and might even make
qnx4fs work on big-endian boxes)
Signed-off-by: NAlexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAnders Larsen <al@alarsen.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They don't actually clobber memory, but gcc doesn't even know they
_read_ memory, so can apparently re-order memory accesses around them.

Which obviously does the wrong thing if the memory access happens to
change the memory that the compare function is accessing..

Verified to fix a strange boot problem by Jens Axboe.

Another rollup of patches which give various symbols static scope
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sys_madvice/fadvice return sane with xip.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch reworks filemap_xip.c with the goal to reduce code duplication
from mm/filemap.c.  It applies agains 2.6.12-rc6-mm1.  Instead of
implementing the aio functions, this one implements the synchronous
read/write functions only.  For readv and writev, the generic fallback is
used.  For aio, we rely on the application doing the fallback.  Since our
"synchronous" function does memcpy immediately anyway, there is no
performance difference between using the fallbacks or implementing each
operation.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These are the ext2 related parts.  Ext2 now uses the xip_* file operations
along with the get_xip_page aop when mounted with -o xip.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- generic_file* file operations do no longer have a xip/non-xip split
- filemap_xip.c implements a new set of fops that require get_xip_page
  aop to work proper. all new fops are exported GPL-only (don't like to
  see whatever code use those except GPL modules)
- __xip_unmap now uses page_check_address, which is no longer static
  in rmap.c, and defined in linux/rmap.h
- mm/filemap.h is now much more clean, plainly having just Linus'
  inline funcs moved here from filemap.c
- fix includes in filemap_xip to make it build cleanly on i386
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the block device related part.  The block device operation
direct_access now has a struct block_device as first parameter.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch updates some comments to match code changes.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There was a complaint that function declarations are shown tabular in the
documentation since switching to xmlto.  This patch disables tabular mode
when the function fits in one line.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix documentation build with `make O='

Cc: Martin Waitz <tali@admingilde.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds version and srcversion files to
/sys/module/${modulename} containing the version and srcversion fields
of the module's modinfo section (if present).

/sys/module/e1000
|-- srcversion
`-- version

This patch differs slightly from the version posted in January, as it
now uses the new kstrdup() call in -mm.

Why put this in sysfs?

a) Tools like DKMS, which deal with changing out individual kernel
   modules without replacing the whole kernel, can behave smarter if they
   can tell the version of a given module.  The autoinstaller feature, for
   example, which determines if your system has a "good" version of a
   driver (i.e.  if the one provided by DKMS has a newer verson than that
   provided by the kernel package installed), and to automatically compile
   and install a newer version if DKMS has it but your kernel doesn't yet
   have that version.

b) Because sysadmins manually, or with tools like DKMS, can switch out
   modules on the file system, you can't count on 'modinfo foo.ko', which
   looks at /lib/modules/${kernelver}/...  actually matching what is loaded
   into the kernel already.  Hence asking sysfs for this.

c) as the unbind-driver-from-device work takes shape, it will be
   possible to rebind a driver that's built-in (no .ko to modinfo for the
   version) to a newly loaded module.  sysfs will have the
   currently-built-in version info, for comparison.

d) tech support scripts can then easily grab the version info for what's
   running presently - a question I get often.

There has been renewed interest in this patch on linux-scsi by driver
authors.

As the idea originated from GregKH, I leave his Signed-off-by: intact,
though the implementation is nearly completely new.  Compiled and run on
x86 and x86_64.

From: Matthew Dobson <colpatch@us.ibm.com>

      build fix

From: Thierry Vignaud <tvignaud@mandriva.com>

      build fix

From: Matthew Dobson <colpatch@us.ibm.com>

      warning fix
Signed-off-by: NGreg Kroah-Hartman <greg@kroah.com>
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is necessary to correct I2C detect after normal_i2c_range
removal in gregkh-i2c-i2c-address_range_removal.patch.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for various SAA7134 cards and brings some fixes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NFabrice Aeschbacher <fabrice.aeschbacher@laposte.net>
Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>.
Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tuner improvements and additions.  TEA5767 FM tuner added.  Several small
fixes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for various CX88 cards and allows specifying
card addresses.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: Ncybercide@f2s.com <cybercide@f2s.com>
Signed-off-by: NCatalin Climov <catalin@climov.com>
Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch synchronizes current bttv support on V4L with linux kernel and
adds support to Adlink RTV24 card.

It is asked that *every* patch to V4L stuff to be first submitted to
video4linux-list@redhat.com.

From: "J.A. Magallon" <jamagallon@able.es>

	struct bttv defined after usage.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NPeter Skipworth <pskipworth@clarityvi.com>
Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for tuner#60: Thomson DDT 7611 (ATSC/NTSC) Change tuner in
card#28 (DViCO FusionHDTV3 Gold-T) from tuner=52 (Tuner Thomson DDT 7610)
to tuner=60 (Tuner Thomson DDT 7611)
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed
on the card.  This fix corrects the error in all places, and corrects the
tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation.

This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's
patch "Add support for PixelView Ultra Pro in v4l" (because of the
change from card=27 to card=28)
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch adds support for the PixelView Ultra Pro video capture
card in v4l.

- It removes the remote control key definitions from ir-kbd-gpio.c and
  moves them to ir-common.c so that they can be shared between bt878 and
  cx88 based cards.

- The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28
  to regain compatibility with the V4L cvs.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch synchronizes documentation from V4L CVS with current kernel
release.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes PAL-M chroma subcarrier frequency (FSC) to its correct
value of 3.5756115 MHz and adjusts horizontal total samples for PAL-M,
according with formula Line Draw Time / (4*FSC).
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Cc: <video4linux-list@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes NTSC VBI capturing in the saa7134 driver.
Signed-off-by: NMichael H. Schimek <mschimek@gmx.at>
Cc: <video4linux-list@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The bttv module currently lacks support for the Adlink RTV24 capture card.
The following patch adds support for the Adlink RTV24 video capture card to
the bttv module.

Cc: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows full analog functionality for the DViCO FusionHDTV3
Gold-Q, 18ac:d820 which has a Conexant cx23882, Thompson7611, and LG 3202.
It does NOT yet support digital decoding or digital audio without the
internal analog audio jack connected to the sound board, but it works
perfectly in analog mode.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

VIDEO_CX88_DVB must select DVB_CX22702 (due to its cx22702_attach usage).

This patch fixes kernel Bugzilla #4594
(http://bugzilla.kernel.org/show_bug.cgi?id=4594).
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

> -			*ptr = sg_dma_address(list) - list->offset;
> +			*ptr = cpu_to_le32(sg_dma_address(list) - list->offset);

Clearly mark pointers to little-endian things.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NGerd Knorr <kraxel@bytesex.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix byteorder bug in the saa7134 driver.  With that ObviouslyCorrect[tm]
patch applied the driver reportly works on powerpc.
Signed-off-by: NGerd Knorr <kraxel@bytesex.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set the recovery directory via /proc/fs/nfsd/nfs4recoverydir.

It may be changed any time, but is used only on startup.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds the code to create and remove client subdirectories from the
recovery directory, as described in the previous patch comment.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

NFSv4 clients are required to know what state they have on the server so that
they can reclaim it on server reboot.  However, it is possible for
pathalogical combinations of server reboots and network partitions to leave a
client in a state where it cannot know whether it has lost its state on the
server.

For this reason, rfc3530 requires that we store some information about clients
to stable storage.

So we maintain a directory /var/lib/nfs/v4recovery with a subdirectory for
each client with active state.  We leave open the possibility of including
files underneath each such subdirectory with information about the client, but
for now the subdirectories are empty.

We create a client subdirectory whenever a client makes its first non-reclaim
open_confirm.

We remove a client subdirectory whenever either
        a) its lease expires, or
	b) the grace period ends without it reclaiming anything.
When handling reclaims, we allow the reclaim if and only if the client doing
the reclaim has a subdirectory.

This patch adds just the code to scan the recovery directory on nfsd startup.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The cb_parsed field is only used by probe_callback, to determine whether the
callback information has been filled in by setclientid.  But there is no way
that probe_callback() can be called without that having already happened, so
that check is superfluous, as is cb_parsed.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

>From the language of rfc3530 section 8.1.3 (e.g., the suggestion that a
"process id" might be a reasonable lockowner value) it's conceivable that a
client might want to use the same lockowner string on multiple files, so we may
as well allow that.  We expect each use of open_to_lockowner to create a
distinct seqid stream, though.

For now we're also allowing multiple uses of open_to_lockowner with the same
open, though it seems unlikely clients would actually do that.

Also add a comment reminding myself of some very non-scalable data structures.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Trivial renaming patch:

I can never remember, while looking at various lists relating the nfsd4 state
structures, which are the "heads" and which are items on other lists, or which
structures are actually on the various lists.  The following convention helps
me: given structures foo and bar, with foo containing the head of a list of
bars, use "bars" for the name of the head of the list contained in the struct
foo, and use "per_foo" for the entries in the struct bars.

Already done for struct nfs4_file; go ahead and do it for the other nfsd4
state structures.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Minor cleanup, remove some unnecessary printk's.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Trivial whitespace and comment fixes.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change from "goto" to "else if" format in setclientid_confirm.

From: Fred Isaman
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

NFS4_INVAL is not a valid error for setclientid_confirm, and INUSE is the more
logical error here anyway.

From: Fred Isaman
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>