Add extern and static declarations to suppress sparse warnings
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Brown paper bag: Data valid is LSB of the ISR (status register), and NOT
of ODATA (current random data word)!

With this, rngtest is a lot happier. Before:

rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 3
rngtest: FIPS 140-2 failures: 997
rngtest: FIPS 140-2(2001-10-10) Monobit: 604
rngtest: FIPS 140-2(2001-10-10) Poker: 996
rngtest: FIPS 140-2(2001-10-10) Runs: 36
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 117
rngtest: input channel speed: (min=622.371; avg=23682.481; max=28224.350)Kibitss
rngtest: FIPS tests speed: (min=12.361; avg=12.718; max=12.861)Mibits/s
rngtest: Program run time: 2331696 microsecondsx

After:
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 999
rngtest: FIPS 140-2 failures: 1
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=777.363; avg=43588.270; max=47870.711)Kibitss
rngtest: FIPS tests speed: (min=11.943; avg=12.716; max=12.844)Mibits/s
rngtest: Program run time: 1955282 microseconds

Cc: stable@vger.kernel.org
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Reported-by: NGeorge Pontis <GPontis@z9.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This seems to come on Gigabyte H55M-S2V and was discovered through the
https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Data valid gets cleared by reading the ISR (status register) and NOT from
reading ODATA (data register). A new data word can become available between
checking ISR and reading ODATA, causing us to reuse the same data word next
time atmel_trng_read() gets called, if that happens before the following
data word is ready.

With this fixed, rngtest no longer complains of 'Continous run' errors.
Before:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 923
rngtest: FIPS 140-2 failures: 77
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 76
rngtest: input channel speed: (min=721.402; avg=46003.510; max=49321.338)Kibitss
rngtest: FIPS tests speed: (min=11.442; avg=12.714; max=12.801)Mibits/s
rngtest: Program run time: 1931860 microseconds

After:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 1000
rngtest: FIPS 140-2 failures: 0
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 0
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=777.518; avg=36988.482; max=43115.342)Kibitss
rngtest: FIPS tests speed: (min=11.951; avg=12.715; max=12.887)Mibits/s
rngtest: Program run time: 2035543 microseconds

Cc: stable@vger.kernel.org
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Reported-by: NGeorge Pontis <GPontis@z9.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch enables i915 driver to handle Haswell devices. It should go in
last, when things are working stable enough.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If a port was open before going into one of the sleep states, the port
can continue normal operation after restore.  However, the host has to
be told that the guest side of the connection is open to restore
pre-suspend state.

This wasn't noticed so far due to a bug in qemu that was fixed recently
(which marked the guest-side connection as always open).

CC: stable@vger.kernel.org   # Only for 3.3
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Since ramoops was converted to pstore, it has nothing to do with character
devices nowadays. Instead, today it is just a RAM backend for pstore.

The patch just moves things around. There are a few changes were needed
because of the move:

1. Kconfig and Makefiles fixups, of course.

2. In pstore/ram.c we have to play a bit with MODULE_PARAM_PREFIX, this
   is needed to keep user experience the same as with ramoops driver
   (i.e. so that ramoops.foo kernel command line arguments would still
   work).
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: NMarco Stornelli <marco.stornelli@gmail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix printk format warnings for phys_addr_t type variables:

drivers/char/ramoops.c:246:3: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t'
drivers/char/ramoops.c:273:2: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of using /dev/mem directly and forcing userspace to know (or
extract) where the platform has defined persistent memory, how many slots
it has, the sizes, etc, use the common pstore infrastructure to handle
Oops gathering and extraction.  This presents a much easier to use
filesystem-based view to the memory region.  This also means that any
other tools that are written to understand pstore will automatically be
able to process ramoops too.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adds support for the Platform Facilities Option (PFO)-based hardware
random number generator for POWER hardware.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NKent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support for multiple concurrent readers of /dev/kmsg, with read(),
seek(), poll() support. Output of message sequence numbers, to allow
userspace log consumers to reliably reconnect and reconstruct their
state at any given time. After open("/dev/kmsg"), read() always
returns *all* buffered records. If only future messages should be
read, SEEK_END can be used. In case records get overwritten while
/dev/kmsg is held open, or records get faster overwritten than they
are read, the next read() will return -EPIPE and the current reading
position gets updated to the next available record. The passed
sequence numbers allow the log consumer to calculate the amount of
lost messages.

  [root@mop ~]# cat /dev/kmsg
  5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ...
  6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
   SUBSYSTEM=acpi
   DEVICE=+acpi:PNP0A03:00
  6,339,5140900;NET: Registered protocol family 10
  30,340,5690716;udevd[80]: starting version 181
  6,341,6081421;FDC 0 is a S82078B
  6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0
  7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0
   SUBSYSTEM=scsi
   DEVICE=+scsi:1:0:0:0
  6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0

Cc: Karel Zak <kzak@redhat.com>
Tested-by: NWilliam Douglas <william.douglas@intel.com>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

- Record-based stream instead of the traditional byte stream
  buffer. All records carry a 64 bit timestamp, the syslog facility
  and priority in the record header.

- Records consume almost the same amount, sometimes less memory than
  the traditional byte stream buffer (if printk_time is enabled). The record
  header is 16 bytes long, plus some padding bytes at the end if needed.
  The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for
  the timestamp and a newline.

- Buffer management is based on message sequence numbers. When records
  need to be discarded, the reading heads move on to the next full
  record. Unlike the byte-stream buffer, no old logged lines get
  truncated or partly overwritten by new ones. Sequence numbers also
  allow consumers of the log stream to get notified if any message in
  the stream they are about to read gets discarded during the time
  of reading.

- Better buffered IO support for KERN_CONT continuation lines, when printk()
  is called multiple times for a single line. The use of KERN_CONT is now
  mandatory to use continuation; a few places in the kernel need trivial fixes
  here. The buffering could possibly be extended to per-cpu variables to allow
  better thread-safety for multiple printk() invocations for a single line.

- Full-featured syslog facility value support. Different facilities
  can tag their messages. All userspace-injected messages enforce a
  facility value > 0 now, to be able to reliably distinguish them from
  the kernel-generated messages. Independent subsystems like a
  baseband processor running its own firmware, or a kernel-related
  userspace process can use their own unique facility values. Multiple
  independent log streams can co-exist that way in the same
  buffer. All share the same global sequence number counter to ensure
  proper ordering (and interleaving) and to allow the consumers of the
  log to reliably correlate the events from different facilities.
Tested-by: NWilliam Douglas <william.douglas@intel.com>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In order to prevent building the Atmel hw_random driver for each and every
configuration, add a "default" Kconfig state in relation with
CONFIG_ARCH_AT91.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Using devm_request_and_ioremap is more concise.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Reset the XHI_MAX_RETRIES value. This allows the hardware enough time to
write configuration frames during partial reconfiguration. In case of 10
the driver returns an error, although it should just have polled the
register longer.

Tested on an ML605 board. The patch is against the latest linus-tree.
Signed-off-by: NAriane Keller <ariane.keller@tik.ee.ethz.ch>
Signed-off-by: NDaniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for the virtex6 FPGA to the xilinx_hwicap driver.

Tested on a Xilinx ML605 board. The patch is against the latest linus-tree.
Signed-off-by: NAriane Keller <ariane.keller@tik.ee.ethz.ch>
Signed-off-by: NDaniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This will allow to select this driver for newer SoCs. Make sure to
keep dependency on HAVE_CLK to avoid breaking other machines.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes.  If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads.  Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.

Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace "void *" by "u32 __iomem *" to silence sparse warning.
Signed-off-by: NSantosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

'break' is unnecessary after 'return' statement.
Remove all such 'break' as clean up.
Signed-off-by: NSantosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A prototype for kmsg records instead of a byte-stream buffer revealed
a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce
one record per printk() call, while all should have ended up in a single
record.

Instead of:
  ACPI: (supports S0 S5)
  ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
  hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0

It prints:
  ACPI: (supports S0
   S5
  )
  ACPI: PCI Interrupt Link [LNKA] (IRQs
   5
   *10
   11
  )
  hpet0: at MMIO 0xfed00000, IRQs
   2
  , 8
  , 0

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds product definitions for desktop, mobile and server boards.

v2: split into a separate patch, add .has_pch_split feature.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I found the Xorg server on my ARM device stuck in the 'msleep()' loop
in apm_ioctl.

I suspect it had attempted suspend immediately after resuming and lost
a race.
During that msleep(10);, a new suspend cycle must have started and
changed ->suspend_state to SUSPEND_PENDING, so it was never seen to
be SUSPEND_DONE and the loop could never exited.  It would have moved on
to SUSPEND_ACKTO but never been able to reach SUSPEND_DONE.

So change the loop to only run while SUSPEND_ACKED rather than until
SUSPEND_DONE.  This is much safer.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Totally unexpected that this regressed. Luckily it sounds like we just
need to have dmar disable on the igfx, not the entire system. At least
that's what a few days of testing between Tony Vroon and me indicates.
Reported-by: NTony Vroon <tony@linx.net>
Cc: Tony Vroon <tony@linx.net>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43024Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds PCI ID for IVB GT2 server variant which we were missing.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: fix up conflict because the patch has been diffed against next. tsk.]
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The IPMI watchdog timer clears or extends the timer on reboot/shutdown.
It was using the non-locking routine for setting the watchdog timer, but
this was causing race conditions.  Instead, use the locking version to
avoid the races.  It seems to work fine.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the the IPMI driver is using a tasklet, we can simplify the
locking in the driver and get rid of the message lock.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The part of the IPMI driver that delivered panic information to the event
log and extended the watchdog timeout during a panic was not properly
handling the messages.  It used static messages to avoid allocation, but
wasn't properly waiting for these, or wasn't properly handling the
refcounts.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The IPMI driver would release a lock, deliver a message, then relock.
This is obviously ugly, and this patch converts the message handler
interface to use a tasklet to schedule work.  This lets the receive
handler be called from an interrupt handler with interrupts enabled.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We currently time out and retry KCS transactions after 1 second of waiting
for IBF or OBF.  This appears to be too short for some hardware.  The IPMI
spec says "All system software wait loops should include error timeouts.
For simplicity, such timeouts are not shown explicitly in the flow
diagrams.  A five-second timeout or greater is recommended".  Change the
timeout to five seconds to satisfy the slow hardware.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Call the event handler immediately after starting the next message.

This change considerably decreases the IPMI transaction time (cuts off
~9ms for a single ipmitool transaction).
Signed-off-by: NSrinivas_Gowda <srinivas_g_gowda@dell.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... and bind it right to the PCI id.

Note that there are still a few things to fix here:
- we need to move the tlb flush to a better place in drm/i915.
- we need to check snoop support on vlv and implement it.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: squash follow-on patch and add todo items to commit msg.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to flush the Gunit TLB when we update GTT PTEs on VLV, but the
register for doing so is above the range we normally map.  Map the whole
register space to make sure we can get it.

v2: only map the larger space on gen7+ (Daniel)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: NDavid Howells <dhowells@redhat.com>

nowayout is actually a boolean value.
So make it bool for all watchdog device drivers.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

For simple modules that contain a single amba_driver without any
additional setup code then ends up being a block of duplicated
boilerplate. This patch adds a new macro, module_amba_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This reverts commit a7ccf377.

It changes deprecated code that is being removed in powerpc tree.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>