1. 19 3月, 2017 1 次提交
  2. 16 3月, 2017 7 次提交
    • H
      parisc: Avoid compiler warnings with access_ok() · 186ecf14
      Helge Deller 提交于
      Commit 09b871ff (parisc: Define access_ok() as macro) missed to mark uaddr
      as used, which then gives compiler warnings about unused variables.
      
      Fix it by comparing uaddr to uaddr which then gets optimized away by the
      compiler.
      Signed-off-by: NHelge Deller <deller@gmx.de>
      Fixes: 09b871ff ("parisc: Define access_ok() as macro")
      186ecf14
    • H
      parisc: Wire up statx system call · 63d32d1e
      Helge Deller 提交于
      Signed-off-by: NHelge Deller <deller@gmx.de>
      63d32d1e
    • J
      parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range · 316ec062
      John David Anglin 提交于
      The previously submitted patch did not resolve the random segmentation
      faults observed on the phantom buildd system.  There are still
      unresolved problems with the Debian 4.8 and 4.9 kernels on C8000.
      
      The attached patch removes the flush of the offset map pages and does a
      whole data cache flush for large ranges.  No other arch flushes the
      offset map in these routines as far as I can tell.
      
      I have not observed any random segmentation faults on rp3440 in two
      weeks of testing with 4.10.0 and 4.10.1.
      Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
      Cc: stable@vger.kernel.org      # v4.8+
      Signed-off-by: NHelge Deller <deller@gmx.de>
      316ec062
    • M
      parisc: support R_PARISC_SECREL32 relocation in modules · 5f655322
      Mikulas Patocka 提交于
      The parisc kernel doesn't work with CONFIG_MODVERSIONS since the commit
      71810db2. It can't load modules with the
      error: "module unix: Unknown relocation: 41".
      
      The commit changes __kcrctab from 64-bit valus to 32-bit values. The
      assembler generates R_PARISC_SECREL32 secrel relocation for them and the
      module loader doesn't support this relocation.
      
      This patch adds the R_PARISC_SECREL32 relocation to the module loader.
      Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
      Cc: stable@vger.kernel.org	# v4.10+
      Signed-off-by: NHelge Deller <deller@gmx.de>
      5f655322
    • L
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 95422dec
      Linus Torvalds 提交于
      Pull SCSI fixes from James Bottomley:
       "This is a rather large set of fixes. The bulk are for lpfc correcting
        a lot of issues in the new NVME driver code which just went in in the
        merge window.
      
        The others are:
      
         - fix a hang in the vmware paravirt driver caused by incorrect
           handling of the new MSI vector allocation
      
         - long standing bug in storvsc, which recent block changes turned
           from being a harmless annoyance into a hang
      
         - yet more fallout (in mpt3sas) from the changes to device blocking
      
        The remainder are small fixes and updates"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits)
        scsi: lpfc: Add shutdown method for kexec
        scsi: storvsc: Workaround for virtual DVD SCSI version
        scsi: lpfc: revise version number to 11.2.0.10
        scsi: lpfc: code cleanups in NVME initiator discovery
        scsi: lpfc: code cleanups in NVME initiator base
        scsi: lpfc: correct rdp diag portnames
        scsi: lpfc: remove dead sli3 nvme code
        scsi: lpfc: correct double print
        scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT
        scsi: lpfc: Rework lpfc Kconfig for NVME options
        scsi: lpfc: add transport eh_timed_out reference
        scsi: lpfc: Fix eh_deadline setting for sli3 adapters.
        scsi: lpfc: add NVME exchange aborts
        scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport
        scsi: lpfc: Fix IO submission if WQ is full
        scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem
        scsi: lpfc: Fix RCTL value on NVME LS request and response
        scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
        scsi: lpfc: fix missing spin_unlock on sql_list_lock
        scsi: lpfc: don't dereference dma_buf->iocbq before null check
        ...
      95422dec
    • L
      Merge tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 · aabcf5fc
      Linus Torvalds 提交于
      Pull gfs2 fix from Bob Peterson:
       "This is an emergency patch for 4.11-rc3
      
        The GFS2 developers uncovered a really nasty problem that can lead to
        random corruption and kernel panic, much like the last one. Andreas
        Gruenbacher wrote a simple one-line patch to fix the problem."
      
      * tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
        gfs2: Avoid alignment hole in struct lm_lockname
      aabcf5fc
    • L
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · defc7d75
      Linus Torvalds 提交于
      Pull crypto fixes from Herbert Xu:
      
       - self-test failure of crc32c on powerpc
      
       - regressions of ecb(aes) when used with xts/lrw in s5p-sss
      
       - a number of bugs in the omap RNG driver
      
      * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
        crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
        hwrng: omap - Do not access INTMASK_REG on EIP76
        hwrng: omap - use devm_clk_get() instead of of_clk_get()
        hwrng: omap - write registers after enabling the clock
        crypto: s5p-sss - Fix completing crypto request in IRQ handler
        crypto: powerpc - Fix initialisation of crc32c context
      defc7d75
  3. 15 3月, 2017 18 次提交
  4. 14 3月, 2017 13 次提交
    • H
      dccp: fix memory leak during tear-down of unsuccessful connection request · 72ef9c41
      Hannes Frederic Sowa 提交于
      This patch fixes a memory leak, which happens if the connection request
      is not fulfilled between parsing the DCCP options and handling the SYN
      (because e.g. the backlog is full), because we forgot to free the
      list of ack vectors.
      Reported-by: NJianwen Ji <jiji@redhat.com>
      Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      72ef9c41
    • H
      tun: fix premature POLLOUT notification on tun devices · b20e2d54
      Hannes Frederic Sowa 提交于
      aszlig observed failing ssh tunnels (-w) during initialization since
      commit cc9da6cc ("ipv6: addrconf: use stable address generator for
      ARPHRD_NONE"). We already had reports that the mentioned commit breaks
      Juniper VPN connections. I can't clearly say that the Juniper VPN client
      has the same problem, but it is worth a try to hint to this patch.
      
      Because of the early generation of link local addresses, the kernel now
      can start asking for routers on the local subnet much earlier than usual.
      Those router solicitation packets arrive inside the ssh channels and
      should be transmitted to the tun fd before the configuration scripts
      might have upped the interface and made it ready for transmission.
      
      ssh polls on the interface and receives back a POLL_OUT. It tries to send
      the earily router solicitation packet to the tun interface.  Unfortunately
      it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh
      doesn't retry again and considers the tun interface broken forever.
      
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131
      Fixes: cc9da6cc ("ipv6: addrconf: use stable address generator for ARPHRD_NONE")
      Cc: Bjørn Mork <bjorn@mork.no>
      Reported-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu>
      Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
      Reported-by: NJonas Lippuner <jonas@lippuner.ca>
      Cc: Jonas Lippuner <jonas@lippuner.ca>
      Reported-by: Naszlig <aszlig@redmoonstudios.org>
      Cc: aszlig <aszlig@redmoonstudios.org>
      Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b20e2d54
    • J
      dccp/tcp: fix routing redirect race · 45caeaa5
      Jon Maxwell 提交于
      As Eric Dumazet pointed out this also needs to be fixed in IPv6.
      v2: Contains the IPv6 tcp/Ipv6 dccp patches as well.
      
      We have seen a few incidents lately where a dst_enty has been freed
      with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that
      dst_entry. If the conditions/timings are right a crash then ensues when the
      freed dst_entry is referenced later on. A Common crashing back trace is:
      
       #8 [] page_fault at ffffffff8163e648
          [exception RIP: __tcp_ack_snd_check+74]
      .
      .
       #9 [] tcp_rcv_established at ffffffff81580b64
      #10 [] tcp_v4_do_rcv at ffffffff8158b54a
      #11 [] tcp_v4_rcv at ffffffff8158cd02
      #12 [] ip_local_deliver_finish at ffffffff815668f4
      #13 [] ip_local_deliver at ffffffff81566bd9
      #14 [] ip_rcv_finish at ffffffff8156656d
      #15 [] ip_rcv at ffffffff81566f06
      #16 [] __netif_receive_skb_core at ffffffff8152b3a2
      #17 [] __netif_receive_skb at ffffffff8152b608
      #18 [] netif_receive_skb at ffffffff8152b690
      #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3]
      #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3]
      #21 [] net_rx_action at ffffffff8152bac2
      #22 [] __do_softirq at ffffffff81084b4f
      #23 [] call_softirq at ffffffff8164845c
      #24 [] do_softirq at ffffffff81016fc5
      #25 [] irq_exit at ffffffff81084ee5
      #26 [] do_IRQ at ffffffff81648ff8
      
      Of course it may happen with other NIC drivers as well.
      
      It's found the freed dst_entry here:
      
       224 static bool tcp_in_quickack_mode(struct sock *sk)
       225 {
       226 ▹       const struct inet_connection_sock *icsk = inet_csk(sk);
       227 ▹       const struct dst_entry *dst = __sk_dst_get(sk);
       228 
       229 ▹       return (dst && dst_metric(dst, RTAX_QUICKACK)) ||
       230 ▹       ▹       (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);
       231 }
      
      But there are other backtraces attributed to the same freed dst_entry in
      netfilter code as well.
      
      All the vmcores showed 2 significant clues:
      
      - Remote hosts behind the default gateway had always been redirected to a
      different gateway. A rtable/dst_entry will be added for that host. Making
      more dst_entrys with lower reference counts. Making this more probable.
      
      - All vmcores showed a postitive LockDroppedIcmps value, e.g:
      
      LockDroppedIcmps                  267
      
      A closer look at the tcp_v4_err() handler revealed that do_redirect() will run
      regardless of whether user space has the socket locked. This can result in a
      race condition where the same dst_entry cached in sk->sk_dst_entry can be
      decremented twice for the same socket via:
      
      do_redirect()->__sk_dst_check()-> dst_release().
      
      Which leads to the dst_entry being prematurely freed with another socket
      pointing to it via sk->sk_dst_cache and a subsequent crash.
      
      To fix this skip do_redirect() if usespace has the socket locked. Instead let
      the redirect take place later when user space does not have the socket
      locked.
      
      The dccp/IPv6 code is very similar in this respect, so fixing it there too.
      
      As Eric Garver pointed out the following commit now invalidates routes. Which
      can set the dst->obsolete flag so that ipv4_dst_check() returns null and
      triggers the dst_release().
      
      Fixes: ceb33206 ("ipv4: Kill routes during PMTU/redirect updates.")
      Cc: Eric Garver <egarver@redhat.com>
      Cc: Hannes Sowa <hsowa@redhat.com>
      Signed-off-by: NJon Maxwell <jmaxwell37@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      45caeaa5
    • Z
      ucc/hdlc: fix two little issue · 02bb56dd
      Zhao Qiang 提交于
      1. modify bd_status from u32 to u16 in function hdlc_rx_done,
      because bd_status register is 16bits
      2. write bd_length register before writing bd_status register
      Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      02bb56dd
    • L
      Merge tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · fb5fe0fd
      Linus Torvalds 提交于
      Pull some more powerpc fixes from Michael Ellerman:
       "The main item is the addition of the Power9 Machine Check handler.
        This was delayed to make sure some details were correct, and is as
        minimal as possible.
      
        The rest is small fixes, two for the Power9 PMU, two dealing with
        obscure toolchain problems, two for the PowerNV IOMMU code (used by
        VFIO), and one to fix a crash on 32-bit machines with macio devices
        due to missing dma_ops.
      
        Thanks to:
          Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
          Nicholas Piggin"
      
      * tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
        powerpc/64s: POWER9 machine check handler
        powerpc/64s: allow machine check handler to set severity and initiator
        powerpc/64s: fix handling of non-synchronous machine checks
        powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
        powerpc/powernv/ioda2: Update iommu table base on ownership change
        powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
        selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
        powerpc/perf: Handle sdar_mode for marked event in power9
        powerpc/perf: Fix perf_get_data_addr() for power9 DD1
        powerpc/boot: Fix zImage TOC alignment
      fb5fe0fd
    • N
      vxlan: fix ovs support · c80498e3
      Nicolas Dichtel 提交于
      The required changes in the function vxlan_dev_create() were missing
      in commit 8bcdc4f3.
      The vxlan device is not registered anymore after this patch and the error
      path causes an stack dump:
       WARNING: CPU: 3 PID: 1498 at net/core/dev.c:6713 rollback_registered_many+0x9d/0x3f0
      
      Fixes: 8bcdc4f3 ("vxlan: add changelink support")
      CC: Roopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
      Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c80498e3
    • A
      net: use net->count to check whether a netns is alive or not · 91864f58
      Andrey Vagin 提交于
      The previous idea was to check whether a net namespace is in
      net_exit_list or not. It doesn't work, because net->exit_list is used in
      __register_pernet_operations and __unregister_pernet_operations where
      all namespaces are added to a temporary list to make cleanup in a error
      case, so list_empty(&net->exit_list) always returns false.
      Reported-by: NMantas Mikulėnas <grawity@gmail.com>
      Fixes: 002d8a1a ("net: skip genenerating uevents for network namespaces that are exiting")
      Signed-off-by: NAndrei Vagin <avagin@openvz.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      91864f58
    • L
      Merge tag 'platform-drivers-x86-v4.11-2' of git://git.infradead.org/linux-platform-drivers-x86 · 065f3e49
      Linus Torvalds 提交于
      Pull x86 platform driver updates from Darren Hart:
       "Asus fixes for the airplane LED and a long awaited fujitsu cleanup.
      
        asus-wmi:
         - Remove quirk_no_rfkill
         - Detect quirk_no_rfkill from the DSDT
      
        fujitsu-laptop:
         - remove redundant MODULE_ALIAS entries
         - autodetect LCD interface on all models
         - simplify acpi_bus_register_driver() error handling
         - remove redundant forward declarations
         - replace numeric values with constants
         - rename FUNC_RFKILL to FUNC_FLAGS
         - make platform-related variables match naming convention
         - replace "hotkey" with "laptop" in symbol names
         - clearly denote backlight-related symbols"
      
      * tag 'platform-drivers-x86-v4.11-2' of git://git.infradead.org/linux-platform-drivers-x86:
        platform/x86: asus-wmi: Remove quirk_no_rfkill
        platform/x86: asus-wmi: Detect quirk_no_rfkill from the DSDT
        platform/x86: fujitsu-laptop: remove redundant MODULE_ALIAS entries
        platform/x86: fujitsu-laptop: autodetect LCD interface on all models
        platform/x86: fujitsu-laptop: simplify acpi_bus_register_driver() error handling
        platform/x86: fujitsu-laptop: remove redundant forward declarations
        platform/x86: fujitsu-laptop: replace numeric values with constants
        platform/x86: fujitsu-laptop: rename FUNC_RFKILL to FUNC_FLAGS
        platform/x86: fujitsu-laptop: make platform-related variables match naming convention
        platform/x86: fujitsu-laptop: replace "hotkey" with "laptop" in symbol names
        platform/x86: fujitsu-laptop: clearly denote backlight-related symbols
      065f3e49
    • F
      bridge: drop netfilter fake rtable unconditionally · a13b2082
      Florian Westphal 提交于
      Andreas reports kernel oops during rmmod of the br_netfilter module.
      Hannes debugged the oops down to a NULL rt6info->rt6i_indev.
      
      Problem is that br_netfilter has the nasty concept of adding a fake
      rtable to skb->dst; this happens in a br_netfilter prerouting hook.
      
      A second hook (in bridge LOCAL_IN) is supposed to remove these again
      before the skb is handed up the stack.
      
      However, on module unload hooks get unregistered which means an
      skb could traverse the prerouting hook that attaches the fake_rtable,
      while the 'fake rtable remove' hook gets removed from the hooklist
      immediately after.
      
      Fixes: 34666d46 ("netfilter: bridge: move br_netfilter out of the core")
      Reported-by: NAndreas Karis <akaris@redhat.com>
      Debugged-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: NFlorian Westphal <fw@strlen.de>
      Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a13b2082
    • F
      ipv6: avoid write to a possibly cloned skb · 79e49503
      Florian Westphal 提交于
      ip6_fragment, in case skb has a fraglist, checks if the
      skb is cloned.  If it is, it will move to the 'slow path' and allocates
      new skbs for each fragment.
      
      However, right before entering the slowpath loop, it updates the
      nexthdr value of the last ipv6 extension header to NEXTHDR_FRAGMENT,
      to account for the fragment header that will be inserted in the new
      ipv6-fragment skbs.
      
      In case original skb is cloned this munges nexthdr value of another
      skb.  Avoid this by doing the nexthdr update for each of the new fragment
      skbs separately.
      
      This was observed with tcpdump on a bridge device where netfilter ipv6
      reassembly is active:  tcpdump shows malformed fragment headers as
      the l4 header (icmpv6, tcp, etc). is decoded as a fragment header.
      
      Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
      Reported-by: NAndreas Karis <akaris@redhat.com>
      Signed-off-by: NFlorian Westphal <fw@strlen.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      79e49503
    • J
      net: wimax/i2400m: fix NULL-deref at probe · 6e526fdf
      Johan Hovold 提交于
      Make sure to check the number of endpoints to avoid dereferencing a
      NULL-pointer or accessing memory beyond the endpoint array should a
      malicious device lack the expected endpoints.
      
      The endpoints are specifically dereferenced in the i2400m_bootrom_init
      path during probe (e.g. in i2400mu_tx_bulk_out).
      
      Fixes: f398e424 ("i2400m/USB: probe/disconnect, dev init/shutdown
      and reset backends")
      Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
      Signed-off-by: NJohan Hovold <johan@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6e526fdf
    • J
      isdn/gigaset: fix NULL-deref at probe · 68c32f9c
      Johan Hovold 提交于
      Make sure to check the number of endpoints to avoid dereferencing a
      NULL-pointer should a malicious device lack endpoints.
      
      Fixes: cf7776dc ("[PATCH] isdn4linux: Siemens Gigaset drivers -
      direct USB connection")
      Cc: stable <stable@vger.kernel.org>	# 2.6.17
      Cc: Hansjoerg Lipp <hjlipp@web.de>
      Signed-off-by: NJohan Hovold <johan@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      68c32f9c
    • S
      ipv6: make ECMP route replacement less greedy · 67e19400
      Sabrina Dubroca 提交于
      Commit 27596472 ("ipv6: fix ECMP route replacement") introduced a
      loop that removes all siblings of an ECMP route that is being
      replaced. However, this loop doesn't stop when it has replaced
      siblings, and keeps removing other routes with a higher metric.
      We also end up triggering the WARN_ON after the loop, because after
      this nsiblings < 0.
      
      Instead, stop the loop when we have taken care of all routes with the
      same metric as the route being replaced.
      
        Reproducer:
        ===========
          #!/bin/sh
      
          ip netns add ns1
          ip netns add ns2
          ip -net ns1 link set lo up
      
          for x in 0 1 2 ; do
              ip link add veth$x netns ns2 type veth peer name eth$x netns ns1
              ip -net ns1 link set eth$x up
              ip -net ns2 link set veth$x up
          done
      
          ip -net ns1 -6 r a 2000::/64 nexthop via fe80::0 dev eth0 \
                  nexthop via fe80::1 dev eth1 nexthop via fe80::2 dev eth2
          ip -net ns1 -6 r a 2000::/64 via fe80::42 dev eth0 metric 256
          ip -net ns1 -6 r a 2000::/64 via fe80::43 dev eth0 metric 2048
      
          echo "before replace, 3 routes"
          ip -net ns1 -6 r | grep -v '^fe80\|^ff00'
          echo
      
          ip -net ns1 -6 r c 2000::/64 nexthop via fe80::4 dev eth0 \
                  nexthop via fe80::5 dev eth1 nexthop via fe80::6 dev eth2
      
          echo "after replace, only 2 routes, metric 2048 is gone"
          ip -net ns1 -6 r | grep -v '^fe80\|^ff00'
      
      Fixes: 27596472 ("ipv6: fix ECMP route replacement")
      Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
      Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
      Reviewed-by: NXin Long <lucien.xin@gmail.com>
      Reviewed-by: NMichal Kubecek <mkubecek@suse.cz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      67e19400
  5. 13 3月, 2017 1 次提交