For EPT memory type support.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

GUEST_PAT support is a new feature introduced by Intel Core i7 architecture.
With this, cpu would save/load guest and host PAT automatically, for EPT memory
type in guest depends on MSR_IA32_CR_PAT.

Also add save/restore for MSR_IA32_CR_PAT.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

As well as reset mmu context when set MTRR.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

For KVM can reuse the type define, and need them to support shadow MTRR.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Prepare for exporting them.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Call kvm_arch_vcpu_reset() instead of directly using arch callback.
The function does additional things.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Older VMX supporting CPUs do not provide the "Virtual NMI" feature for
tracking the NMI-blocked state after injecting such events. For now
KVM is unable to inject NMIs on those CPUs.

Derived from Sheng Yang's suggestion to use the IRQ window notification
for detecting the end of NMI handlers, this patch implements virtual
NMI support without impact on the host's ability to receive real NMIs.
The downside is that the given approach requires some heuristics that
can cause NMI nesting in vary rare corner cases.

The approach works as follows:
 - inject NMI and set a software-based NMI-blocked flag
 - arm the IRQ window start notification whenever an NMI window is
   requested
 - if the guest exits due to an opening IRQ window, clear the emulated
   NMI-blocked flag
 - if the guest net execution time with NMI-blocked but without an IRQ
   window exceeds 1 second, force NMI-blocked reset and inject anyway

This approach covers most practical scenarios:
 - succeeding NMIs are seperated by at least one open IRQ window
 - the guest may spin with IRQs disabled (e.g. due to a bug), but
   leaving the NMI handler takes much less time than one second
 - the guest does not rely on strict ordering or timing of NMIs
   (would be problematic in virtualized environments anyway)

Successfully tested with the 'nmi n' monitor command, the kgdbts
testsuite on smp guests (additional patches required to add debug
register support to kvm) + the kernel's nmi_watchdog=1, and a Siemens-
specific board emulation (+ guest) that comes with its own NMI
watchdog mechanism.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds the required bits to the VMX side for user space
injected NMIs. As with the preexisting in-kernel irqchip support, the
CPU must provide the "virtual NMI" feature for proper tracking of the
NMI blocking state.

Based on the original patch by Sheng Yang.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduces the KVM_NMI IOCTL to the generic x86 part of KVM for
injecting NMIs from user space and also extends the statistic report
accordingly.

Based on the original patch by Sheng Yang.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Kick the NMI receiving VCPU in case the triggering caller runs in a
different context.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Ensure that a VCPU with pending NMIs is considered runnable.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

LINT0 of the LAPIC can be used to route PIT events as NMI watchdog ticks
into the guest. This patch aligns the in-kernel irqchip emulation with
the user space irqchip with already supports this feature. The trick is
to route PIT interrupts to all LAPIC's LVT0 lines.

Rebased and slightly polished patch originally posted by Sheng Yang.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fix NMI injection in real-mode with the same pattern we perform IRQ
injection.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

do_interrupt_requests and vmx_intr_assist go different way for
achieving the same: enabling the nmi/irq window start notification.
Unify their code over enable_{irq|nmi}_window, get rid of a redundant
call to enable_intr_window instead of direct enable_nmi_window
invocation and unroll enable_intr_window for both in-kernel and user
space irq injection accordingly.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

There are currently two ways in VMX to check if an IRQ or NMI can be
injected:
 - vmx_{nmi|irq}_enabled and
 - vcpu.arch.{nmi|interrupt}_window_open.
Even worse, one test (at the end of vmx_vcpu_run) uses an inconsistent,
likely incorrect logic.

This patch consolidates and unifies the tests over
{nmi|interrupt}_window_open as cache + vmx_update_window_states
for updating the cache content.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

CPU reset invalidates pending or already injected NMIs, therefore reset
the related state variables.

Based on original patch by Gleb Natapov.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Properly set GUEST_INTR_STATE_NMI and reset nmi_injected when a
task-switch vmexit happened due to a task gate being used for handling
NMIs. Also avoid the false warning about valid vectoring info in
kvm_handle_exit.

Based on original patch by Gleb Natapov.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

irq_window_exits only tracks IRQ window exits due to user space
requests, nmi_window_exits include all exits. The latter makes more
sense, so let's adjust irq_window_exits accounting.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch consolidate the emulation of push reg instruction.
Signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@bull.net>
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (184 commits)
  [XFS] Fix race in xfs_write() between direct and buffered I/O with DMAPI
  [XFS] handle unaligned data in xfs_bmbt_disk_get_all
  [XFS] avoid memory allocations in xfs_fs_vcmn_err
  [XFS] Fix speculative allocation beyond eof
  [XFS] Remove XFS_BUF_SHUT() and friends
  [XFS] Use the incore inode size in xfs_file_readdir()
  [XFS] set b_error from bio error in xfs_buf_bio_end_io
  [XFS] use inode_change_ok for setattr permission checking
  [XFS] add a FMODE flag to make XFS invisible I/O less hacky
  [XFS] resync headers with libxfs
  [XFS] simplify projid check in xfs_rename
  [XFS] replace b_fspriv with b_mount
  [XFS] Remove unused tracing code
  [XFS] Remove unnecessary assertion
  [XFS] Remove unused variable in ktrace_free()
  [XFS] Check return value of xfs_buf_get_noaddr()
  [XFS] Fix hang after disallowed rename across directory quota domains
  [XFS] Fix compile with CONFIG_COMPAT enabled
  move inode tracing out of xfs_vnode.
  move vn_iowait / vn_iowake into xfs_aops.c
  ...

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (70 commits)
  fs/nfs/nfs4proc.c: make nfs4_map_errors() static
  rpc: add service field to new upcall
  rpc: add target field to new upcall
  nfsd: support callbacks with gss flavors
  rpc: allow gss callbacks to client
  rpc: pass target name down to rpc level on callbacks
  nfsd: pass client principal name in rsc downcall
  rpc: implement new upcall
  rpc: store pointer to pipe inode in gss upcall message
  rpc: use count of pipe openers to wait for first open
  rpc: track number of users of the gss upcall pipe
  rpc: call release_pipe only on last close
  rpc: add an rpc_pipe_open method
  rpc: minor gss_alloc_msg cleanup
  rpc: factor out warning code from gss_pipe_destroy_msg
  rpc: remove unnecessary assignment
  NFS: remove unused status from encode routines
  NFS: increment number of operations in each encode routine
  NFS: fix comment placement in nfs4xdr.c
  NFS: fix tabs in nfs4xdr.c
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Fix reading SL field out of cqe->sl_vid
  RDMA/addr: Fix build breakage when IPv6 is disabled

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (104 commits)
  [SCSI] fcoe: fix configuration problems
  [SCSI] cxgb3i: fix select/depend problem
  [SCSI] fcoe: fix incorrect use of struct module
  [SCSI] cxgb3i: remove use of skb->sp
  [SCSI] cxgb3i: Add cxgb3i iSCSI driver.
  [SCSI] zfcp: Remove unnecessary warning message
  [SCSI] zfcp: Add support for unchained FSF requests
  [SCSI] zfcp: Remove busid macro
  [SCSI] zfcp: remove DID_DID flag
  [SCSI] zfcp: Simplify mask lookups for incoming RSCNs
  [SCSI] zfcp: Remove initial device data from zfcp_data
  [SCSI] zfcp: fix compile warning
  [SCSI] zfcp: Remove adapter list
  [SCSI] zfcp: Simplify SBAL allocation to fix sparse warnings
  [SCSI] zfcp: register with SCSI layer on ccw registration
  [SCSI] zfcp: Fix message line break
  [SCSI] qla2xxx: changes in multiq code
  [SCSI] eata: fix the data buffer accessors conversion regression
  [SCSI] ibmvfc: Improve async event handling
  [SCSI] lpfc : correct printk types on PPC compiles
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (583 commits)
  V4L/DVB (10130): use USB API functions rather than constants
  V4L/DVB (10129): dvb: remove deprecated use of RW_LOCK_UNLOCKED in frontends
  V4L/DVB (10128): modify V4L documentation to be a valid XHTML
  V4L/DVB (10127): stv06xx: Avoid having y unitialized
  V4L/DVB (10125): em28xx: Don't do AC97 vendor detection for i2s audio devices
  V4L/DVB (10124): em28xx: expand output formats available
  V4L/DVB (10123): em28xx: fix reversed definitions of I2S audio modes
  V4L/DVB (10122): em28xx: don't load em28xx-alsa for em2870 based devices
  V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profile
  V4L/DVB (10120): em28xx: remove redundant Pinnacle Dazzle DVC 100 profile
  V4L/DVB (10119): em28xx: fix corrupted XCLK value
  V4L/DVB (10118): zoran: fix warning for a variable not used
  V4L/DVB (10116): af9013: Fix gcc false warnings
  V4L/DVB (10111a): usbvideo.h: remove an useless blank line
  V4L/DVB (10111): quickcam_messenger.c: fix a warning
  V4L/DVB (10110): v4l2-ioctl: Fix warnings when using .unlocked_ioctl = __video_ioctl2
  V4L/DVB (10109): anysee: Fix usage of an unitialized function
  V4L/DVB (10104): uvcvideo: Add support for video output devices
  V4L/DVB (10102): uvcvideo: Ignore interrupt endpoint for built-in iSight webcams.
  V4L/DVB (10101): uvcvideo: Fix bulk URB processing when the header is erroneous
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: Fix percpu counters deadlock
  cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits: net
  drivers/net/usb: use USB API functions rather than constants
  cls_cgroup: clean up Kconfig
  cls_cgroup: clean up for cgroup part
  cls_cgroup: fix an oops when removing a cgroup
  EtherExpress16: fix printing timed out status
  mlx4_en: Added "set_ringparam" Ethtool interface implementation
  mlx4_en: Always allocate RX ring for each interrupt vector
  mlx4_en: Verify number of RX rings doesn't exceed MAX_RX_RINGS
  IPVS: Make "no destination available" message more consistent between schedulers
  net: KS8695: removed duplicated #include
  tun: Fix SIOCSIFHWADDR error.
  smsc911x: compile fix re netif_rx signature changes
  netns: foreach_netdev_safe is insufficient in default_device_exit
  net: make xfrm_statistics_seq_show use generic snmp_fold_field
  net: Fix more NAPI interface netdev argument drop fallout.
  net: Fix unused variable warnings in pasemi_mac.c and spider_net.c

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: struct device - replace bus_id with dev_name()
  lguest: move the initial guest page table creation code to the host
  kvm-s390: implement config_changed for virtio on s390
  virtio_console: support console resizing
  virtio: add PCI device release() function
  virtio_blk: fix type warning
  virtio: block: dynamic maximum segments
  virtio: set max_segment_size and max_sectors to infinite.
  virtio: avoid implicit use of Linux page size in balloon interface
  virtio: hand virtio ring alignment as argument to vring_new_virtqueue
  virtio: use KVM_S390_VIRTIO_RING_ALIGN instead of relying on pagesize
  virtio: use LGUEST_VRING_ALIGN instead of relying on pagesize
  virtio: Don't use PAGE_SIZE for vring alignment in virtio_pci.
  virtio: rename 'pagesize' arg to vring_init/vring_size
  virtio: Don't use PAGE_SIZE in virtio_pci.c
  virtio: struct device - replace bus_id with dev_name(), dev_set_name()
  virtio-pci queue allocation not page-aligned

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

Removed duplicated #include in kernel/trace/trace.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits)
  ide-cd: remove dead dsc_overlap setting
  ide: push local_irq_{save,restore}() to do_identify()
  ide: remove superfluous local_irq_{save,restore}() from ide_dump_status()
  ide: move legacy ISA/VLB ports handling to ide-legacy.c (v2)
  ide: move Power Management support to ide-pm.c
  ide: use ATA_DMA_* defines in ide-dma-sff.c
  ide: checkpatch.pl fixes for ide-lib.c
  ide: remove inline tags from ide-probe.c
  ide: remove redundant code from ide_end_drive_cmd()
  ide: struct device - replace bus_id with dev_name(), dev_set_name()
  ide: rework handling of serialized ports (v2)
  cy82c693: remove superfluous ide_cy82c693 chipset type
  trm290: add IDE_HFLAG_TRM290 host flag
  ide: add ->max_sectors field to struct ide_port_info
  rz1000: apply chipset quirks early (v2)
  ide: always set nIEN on idle devices
  ide: fix ->quirk_list checking in ide_do_request()
  gayle: set IDE_HFLAG_SERIALIZE explictly
  cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  ali14xx: doesn't use shared IRQs
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: ensure symlinks are NUL-terminated

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_sil: add Large Block Transfer support
  [libata] ata_piix: cleanup dmi strings checking
  DMI: add dmi_match
  libata: blacklist NCQ on OCZ CORE 2 SSD (resend)
  [libata] Update kernel-doc comments to match source code
  libata: perform port detach in EH
  libata: when restoring SControl during detach do the PMP links first
  libata: beef up iterators

Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile: select RING_BUFFER
  ring_buffer: adding EXPORT_SYMBOLs
  oprofile: fix lost sample counter
  oprofile: remove nr_available_slots()
  oprofile: port to the new ring_buffer
  ring_buffer: add remaining cpu functions to ring_buffer.h
  oprofile: moving cpu_buffer_reset() to cpu_buffer.h
  oprofile: adding cpu_buffer_entries()
  oprofile: adding cpu_buffer_write_commit()
  oprofile: adding cpu buffer r/w access functions
  ftrace: remove unused function arg in trace_iterator_increment()
  ring_buffer: update description for ring_buffer_alloc()
  oprofile: set values to default when creating oprofilefs
  oprofile: implement switch/case in buffer_sync.c
  x86/oprofile: cleanup IBS init/exit functions in op_model_amd.c
  x86/oprofile: reordering IBS code in op_model_amd.c
  oprofile: fix typo
  oprofile: whitspace changes only
  oprofile: update comment for oprofile_add_sample()
  oprofile: comment cleanup

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: avoid leaking caches or refcounts on sysfs error
  slab: Fix comment on #endif
  slab: remove GFP_THISNODE clearing from alloc_slabmgmt()
  slub: Add might_sleep_if() to slab_alloc()
  SLUB: failslab support
  slub: Fix incorrect use of loose
  slab: Update the kmem_cache_create documentation regarding the name parameter
  slub: make early_kmem_cache_node_alloc void
  slab: unsigned slabp->inuse cannot be less than 0
  slub - fix get_object_page comment
  SLUB: Replace __builtin_return_address(0) with _RET_IP_.
  SLUB: cleanup - define macros instead of hardcoded numbers

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (37 commits)
  drm/i915: fix modeset devname allocation + agp init return check.
  drm/i915: Remove redundant test in error path.
  drm: Add a debug node for vblank state.
  drm: Avoid use-before-null-test on dev in drm_cleanup().
  drm/i915: Don't print to dmesg when taking signal during object_pin.
  drm: pin new and unpin old buffer when setting a mode.
  drm/i915: un-EXPORT and make 'intelfb_panic' static
  drm/i915: Delete unused, pointless i915_driver_firstopen.
  drm/i915: fix sparse warnings: returning void-valued expression
  drm/i915: fix sparse warnings: move 'extern' decls to header file
  drm/i915: fix sparse warnings: make symbols static
  drm/i915: fix sparse warnings: declare one-bit bitfield as unsigned
  drm/i915: Don't double-unpin buffers if we take a signal in evict_everything().
  drm/i915: Fix fbcon setup to align display pitch to 64b.
  drm/i915: Add missing userland definitions for gem init/execbuffer.
  i915/drm: provide compat defines for userspace for certain struct members.
  drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.
  drm: sanitise drm modesetting API + remove unused hotplug
  drm: fix allowing master ioctls on non-master fds.
  drm/radeon: use locked rmmap to remove sarea mapping.
  ...

* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/intel: Fix broken ® symbol in device name.
  agp/intel: add support for G41 chipset

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (98 commits)
  sparc: move select of ARCH_SUPPORTS_MSI
  sparc: drop SUN_IO
  sparc: unify sections.h
  sparc: use .data.init_task section for init_thread_union
  sparc: fix array overrun check in of_device_64.c
  sparc: unify module.c
  sparc64: prepare module_64.c for unification
  sparc64: use bit neutral Elf symbols
  sparc: unify module.h
  sparc: introduce CONFIG_BITS
  sparc: fix hardirq.h removal fallout
  sparc64: do not export pus_fs_struct
  sparc: use sparc64 version of scatterlist.h
  sparc: Commonize memcmp assembler.
  sparc: Unify strlen assembler.
  sparc: Add asm/asm.h
  sparc: Kill memcmp_32.S code which has been ifdef'd out for centuries.
  sparc: replace for_each_cpu_mask_nr with for_each_cpu
  sparc: fix sparse warnings in irq_32.c
  sparc: add include guards to kernel.h
  ...

* 'for-2.6.29' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  bio: get rid of bio_vec clearing
  bounce: don't rely on a zeroed bio_vec list
  cciss: simplify parameters to deregister_disk function
  cfq-iosched: fix race between exiting queue and exiting task
  loop: Do not call loop_unplug for not configured loop device.
  loop: Flush possible running bios when loop device is released.
  alpha: remove dead BIO_VMERGE_BOUNDARY
  Get rid of CONFIG_LSF
  block: make blk_softirq_init() static
  block: use min_not_zero in blk_queue_stack_limits
  block: add one-hit cache for disk partition lookup
  cfq-iosched: remove limit of dispatch depth of max 4 times quantum
  nbd: tell the block layer that it is not a rotational device
  block: get rid of elevator_t typedef
  aio: make the lookup_ioctx() lockless
  bio: add support for inlining a number of bio_vecs inside the bio
  bio: allow individual slabs in the bio_set
  bio: move the slab pointer inside the bio_set
  bio: only mempool back the largest bio_vec slab cache
  block: don't use plugging on SSD devices
  ...

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, sparseirq: clean up Kconfig entry
  x86: turn CONFIG_SPARSE_IRQ off by default
  sparseirq: fix numa_migrate_irq_desc dependency and comments
  sparseirq: add kernel-doc notation for new member in irq_desc, -v2
  locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
  sparseirq, xen: make sure irq_desc is allocated for interrupts
  sparseirq: fix !SMP building, #2
  x86, sparseirq: move irq_desc according to smp_affinity, v7
  proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
  sparse irqs: add irqnr.h to the user headers list
  sparse irqs: handle !GENIRQ platforms
  sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
  sparseirq: fix Alpha build failure
  sparseirq: fix typo in !CONFIG_IO_APIC case
  x86, MSI: pass irq_cfg and irq_desc
  x86: MSI start irq numbering from nr_irqs_gsi
  x86: use NR_IRQS_LEGACY
  sparse irq_desc[] array: core kernel and x86 changes
  genirq: record IRQ_LEVEL in irq_desc[]
  irq.h: remove padding from irq_desc on 64bits

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix warning in kernel/hrtimer.c
  x86: make sure we really have an hpet mapping before using it
  x86: enable HPET on Fujitsu u9200
  linux/timex.h: cleanup for userspace
  posix-timers: simplify de_thread()->exit_itimers() path
  posix-timers: check ->it_signal instead of ->it_pid to validate the timer
  posix-timers: use "struct pid*" instead of "struct task_struct*"
  nohz: suppress needless timer reprogramming
  clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
  nohz: no softirq pending warnings for offline cpus
  hrtimer: removing all ur callback modes, fix
  hrtimer: removing all ur callback modes, fix hotplug
  hrtimer: removing all ur callback modes
  x86: correct link to HPET timer specification
  rtc-cmos: export second NVRAM bank

Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.