Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 2月, 2015 1 次提交
  3. 04 2月, 2015 4 次提交
  5. 02 2月, 2015 1 次提交
    • L
      sched: don't cause task state changes in nested sleep debugging · 00845eb9
      由 Linus Torvalds 提交于 
      Commit 8eb23b9f ("sched: Debug nested sleeps") added code to report
on nested sleep conditions, which we generally want to avoid because the
inner sleeping operation can re-set the thread state to TASK_RUNNING,
but that will then cause the outer sleep loop not actually sleep when it
calls schedule.

However, that's actually valid traditional behavior, with the inner
sleep being some fairly rare case (like taking a sleeping lock that
normally doesn't actually need to sleep).

And the debug code would actually change the state of the task to
TASK_RUNNING internally, which makes that kind of traditional and
working code not work at all, because now the nested sleep doesn't just
sometimes cause the outer one to not block, but will cause it to happen
every time.

In particular, it will cause the cardbus kernel daemon (pccardd) to
basically busy-loop doing scheduling, converting a laptop into a heater,
as reported by Bruno Prémont.  But there may be other legacy uses of
that nested sleep model in other drivers that are also likely to never
get converted to the new model.

This fixes both cases:

 - don't set TASK_RUNNING when the nested condition happens (note: even
   if WARN_ONCE() only _warns_ once, the return value isn't whether the
   warning happened, but whether the condition for the warning was true.
   So despite the warning only happening once, the "if (WARN_ON(..))"
   would trigger for every nested sleep.

 - in the cases where we knowingly disable the warning by using
   "sched_annotate_sleep()", don't change the task state (that is used
   for all core scheduling decisions), instead use '->task_state_change'
   that is used for the debugging decision itself.

(Credit for the second part of the fix goes to Oleg Nesterov: "Can't we
avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the
suggested change to use 'task_state_change' as part of the test)
Reported-and-bisected-by: NBruno Prémont <bonbons@linux-vserver.org>
Tested-by: NRafael J Wysocki <rjw@rjwysocki.net>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Cc: Ilya Dryomov <ilya.dryomov@inktank.com>,
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>,
Cc: Davidlohr Bueso <dave@stgolabs.net>,
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      00845eb9
  7. 31 1月, 2015 1 次提交
  9. 28 1月, 2015 1 次提交
  11. 14 1月, 2015 6 次提交
  13. 23 12月, 2014 1 次提交
  15. 11 12月, 2014 1 次提交
  17. 08 12月, 2014 1 次提交
  19. 04 12月, 2014 1 次提交
  21. 16 11月, 2014 4 次提交
    • W
      sched: Move p->nr_cpus_allowed check to select_task_rq() · 6c1d9410
      由 Wanpeng Li 提交于 
      Move the p->nr_cpus_allowed check into kernel/sched/core.c: select_task_rq().
This change will make fair.c, rt.c, and deadline.c all start with the
same logic.
Suggested-and-Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: "pang.xunlei" <pang.xunlei@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1415150077-59053-1-git-send-email-wanpeng.li@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6c1d9410
    • K
      sched/fair: Kill task_struct::numa_entry and numa_group::task_list · 75389918
      由 Kirill Tkhai 提交于 
      Nobody iterates over numa_group::task_list, this just confuses the readers.
Signed-off-by: NKirill Tkhai <ktkhai@parallels.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1415358456.28592.17.camel@tkhaiSigned-off-by: NIngo Molnar <mingo@kernel.org>
      75389918
    • S
      sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency · 6e998916
      由 Stanislaw Gruszka 提交于 
      Commit d670ec13 "posix-cpu-timers: Cure SMP wobbles" fixes one glibc
test case in cost of breaking another one. After that commit, calling
clock_nanosleep(TIMER_ABSTIME, X) and then clock_gettime(&Y) can result
of Y time being smaller than X time.

Reproducer/tester can be found further below, it can be compiled and ran by:

	gcc -o tst-cpuclock2 tst-cpuclock2.c -pthread
	while ./tst-cpuclock2 ; do : ; done

This reproducer, when running on a buggy kernel, will complain
about "clock_gettime difference too small".

Issue happens because on start in thread_group_cputimer() we initialize
sum_exec_runtime of cputimer with threads runtime not yet accounted and
then add the threads runtime to running cputimer again on scheduler
tick, making it's sum_exec_runtime bigger than actual threads runtime.

KOSAKI Motohiro posted a fix for this problem, but that patch was never
applied: https://lkml.org/lkml/2013/5/26/191 .

This patch takes different approach to cure the problem. It calls
update_curr() when cputimer starts, that assure we will have updated
stats of running threads and on the next schedule tick we will account
only the runtime that elapsed from cputimer start. That also assure we
have consistent state between cpu times of individual threads and cpu
time of the process consisted by those threads.

Full reproducer (tst-cpuclock2.c):

	#define _GNU_SOURCE
	#include <unistd.h>
	#include <sys/syscall.h>
	#include <stdio.h>
	#include <time.h>
	#include <pthread.h>
	#include <stdint.h>
	#include <inttypes.h>

	/* Parameters for the Linux kernel ABI for CPU clocks.  */
	#define CPUCLOCK_SCHED          2
	#define MAKE_PROCESS_CPUCLOCK(pid, clock) \
		((~(clockid_t) (pid) << 3) | (clockid_t) (clock))

	static pthread_barrier_t barrier;

	/* Help advance the clock.  */
	static void *chew_cpu(void *arg)
	{
		pthread_barrier_wait(&barrier);
		while (1) ;

		return NULL;
	}

	/* Don't use the glibc wrapper.  */
	static int do_nanosleep(int flags, const struct timespec *req)
	{
		clockid_t clock_id = MAKE_PROCESS_CPUCLOCK(0, CPUCLOCK_SCHED);

		return syscall(SYS_clock_nanosleep, clock_id, flags, req, NULL);
	}

	static int64_t tsdiff(const struct timespec *before, const struct timespec *after)
	{
		int64_t before_i = before->tv_sec * 1000000000ULL + before->tv_nsec;
		int64_t after_i = after->tv_sec * 1000000000ULL + after->tv_nsec;

		return after_i - before_i;
	}

	int main(void)
	{
		int result = 0;
		pthread_t th;

		pthread_barrier_init(&barrier, NULL, 2);

		if (pthread_create(&th, NULL, chew_cpu, NULL) != 0) {
			perror("pthread_create");
			return 1;
		}

		pthread_barrier_wait(&barrier);

		/* The test.  */
		struct timespec before, after, sleeptimeabs;
		int64_t sleepdiff, diffabs;
		const struct timespec sleeptime = {.tv_sec = 0,.tv_nsec = 100000000 };

		/* The relative nanosleep.  Not sure why this is needed, but its presence
		   seems to make it easier to reproduce the problem.  */
		if (do_nanosleep(0, &sleeptime) != 0) {
			perror("clock_nanosleep");
			return 1;
		}

		/* Get the current time.  */
		if (clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &before) < 0) {
			perror("clock_gettime[2]");
			return 1;
		}

		/* Compute the absolute sleep time based on the current time.  */
		uint64_t nsec = before.tv_nsec + sleeptime.tv_nsec;
		sleeptimeabs.tv_sec = before.tv_sec + nsec / 1000000000;
		sleeptimeabs.tv_nsec = nsec % 1000000000;

		/* Sleep for the computed time.  */
		if (do_nanosleep(TIMER_ABSTIME, &sleeptimeabs) != 0) {
			perror("absolute clock_nanosleep");
			return 1;
		}

		/* Get the time after the sleep.  */
		if (clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &after) < 0) {
			perror("clock_gettime[3]");
			return 1;
		}

		/* The time after sleep should always be equal to or after the absolute sleep
		   time passed to clock_nanosleep.  */
		sleepdiff = tsdiff(&sleeptimeabs, &after);
		if (sleepdiff < 0) {
			printf("absolute clock_nanosleep woke too early: %" PRId64 "\n", sleepdiff);
			result = 1;

			printf("Before %llu.%09llu\n", before.tv_sec, before.tv_nsec);
			printf("After  %llu.%09llu\n", after.tv_sec, after.tv_nsec);
			printf("Sleep  %llu.%09llu\n", sleeptimeabs.tv_sec, sleeptimeabs.tv_nsec);
		}

		/* The difference between the timestamps taken before and after the
		   clock_nanosleep call should be equal to or more than the duration of the
		   sleep.  */
		diffabs = tsdiff(&before, &after);
		if (diffabs < sleeptime.tv_nsec) {
			printf("clock_gettime difference too small: %" PRId64 "\n", diffabs);
			result = 1;
		}

		pthread_cancel(th);

		return result;
	}
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141112155843.GA24803@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6e998916
    • P
      sched/cputime: Fix cpu_timer_sample_group() double accounting · 23cfa361
      由 Peter Zijlstra 提交于 
      While looking over the cpu-timer code I found that we appear to add
the delta for the calling task twice, through:

  cpu_timer_sample_group()
    thread_group_cputimer()
      thread_group_cputime()
        times->sum_exec_runtime += task_sched_runtime();

    *sample = cputime.sum_exec_runtime + task_delta_exec();

Which would make the sample run ahead, making the sleep short.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20141112113737.GI10476@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      23cfa361
  23. 10 11月, 2014 1 次提交
    • A
      sched/numa: Fix out of bounds read in sched_init_numa() · c123588b
      由 Andrey Ryabinin 提交于 
      On latest mm + KASan patchset I've got this:

    ==================================================================
    BUG: AddressSanitizer: out of bounds access in sched_init_smp+0x3ba/0x62c at addr ffff88006d4bee6c
    =============================================================================
    BUG kmalloc-8 (Not tainted): kasan error
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in alloc_vfsmnt+0xb0/0x2c0 age=75 cpu=0 pid=0
     __slab_alloc+0x4b4/0x4f0
     __kmalloc_track_caller+0x15f/0x1e0
     kstrdup+0x44/0x90
     alloc_vfsmnt+0xb0/0x2c0
     vfs_kern_mount+0x35/0x190
     kern_mount_data+0x25/0x50
     pid_ns_prepare_proc+0x19/0x50
     alloc_pid+0x5e2/0x630
     copy_process.part.41+0xdf5/0x2aa0
     do_fork+0xf5/0x460
     kernel_thread+0x21/0x30
     rest_init+0x1e/0x90
     start_kernel+0x522/0x531
     x86_64_start_reservations+0x2a/0x2c
     x86_64_start_kernel+0x15b/0x16a
    INFO: Slab 0xffffea0001b52f80 objects=24 used=22 fp=0xffff88006d4befc0 flags=0x100000000004080
    INFO: Object 0xffff88006d4bed20 @offset=3360 fp=0xffff88006d4bee70

    Bytes b4 ffff88006d4bed10: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
    Object ffff88006d4bed20: 70 72 6f 63 00 6b 6b a5                          proc.kk.
    Redzone ffff88006d4bed28: cc cc cc cc cc cc cc cc                          ........
    Padding ffff88006d4bee68: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
    CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B          3.18.0-rc3-mm1+ #108
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
     ffff88006d4be000 0000000000000000 ffff88006d4bed20 ffff88006c86fd18
     ffffffff81cd0a59 0000000000000058 ffff88006d404240 ffff88006c86fd48
     ffffffff811fa3a8 ffff88006d404240 ffffea0001b52f80 ffff88006d4bed20
    Call Trace:
    dump_stack (lib/dump_stack.c:52)
    print_trailer (mm/slub.c:645)
    object_err (mm/slub.c:652)
    ? sched_init_smp (kernel/sched/core.c:6552 kernel/sched/core.c:7063)
    kasan_report_error (mm/kasan/report.c:102 mm/kasan/report.c:178)
    ? kasan_poison_shadow (mm/kasan/kasan.c:48)
    ? kasan_unpoison_shadow (mm/kasan/kasan.c:54)
    ? kasan_poison_shadow (mm/kasan/kasan.c:48)
    ? kasan_kmalloc (mm/kasan/kasan.c:311)
    __asan_load4 (mm/kasan/kasan.c:371)
    ? sched_init_smp (kernel/sched/core.c:6552 kernel/sched/core.c:7063)
    sched_init_smp (kernel/sched/core.c:6552 kernel/sched/core.c:7063)
    kernel_init_freeable (init/main.c:869 init/main.c:997)
    ? finish_task_switch (kernel/sched/sched.h:1036 kernel/sched/core.c:2248)
    ? rest_init (init/main.c:924)
    kernel_init (init/main.c:929)
    ? rest_init (init/main.c:924)
    ret_from_fork (arch/x86/kernel/entry_64.S:348)
    ? rest_init (init/main.c:924)
    Read of size 4 by task swapper/0:
    Memory state around the buggy address:
     ffff88006d4beb80: fc fc fc fc fc fc fc fc fc fc 00 fc fc fc fc fc
     ffff88006d4bec00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88006d4bec80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88006d4bed00: fc fc fc fc 00 fc fc fc fc fc fc fc fc fc fc fc
     ffff88006d4bed80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    >ffff88006d4bee00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc 04 fc
                                                              ^
     ffff88006d4bee80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88006d4bef00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88006d4bef80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
     ffff88006d4bf000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
     ffff88006d4bf080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ==================================================================

Zero 'level' (e.g. on non-NUMA system) causing out of bounds
access in this line:

     sched_max_numa_distance = sched_domains_numa_distance[level - 1];

Fix this by exiting from sched_init_numa() earlier.
Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Fixes: 9942f79b ("sched/numa: Export info needed for NUMA balancing on complex topologies")
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1415372020-1871-1-git-send-email-a.ryabinin@samsung.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c123588b
  25. 04 11月, 2014 6 次提交
  27. 28 10月, 2014 11 次提交