Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 09 6月, 2013 2 次提交
  3. 10 4月, 2013 1 次提交
  5. 02 4月, 2013 1 次提交
    • J
      selinux: make security_sb_clone_mnt_opts return an error on context mismatch · 094f7b69
      由 Jeff Layton 提交于 
      I had the following problem reported a while back. If you mount the
same filesystem twice using NFSv4 with different contexts, then the
second context= option is ignored. For instance:

    # mount server:/export /mnt/test1
    # mount server:/export /mnt/test2 -o context=system_u:object_r:tmp_t:s0
    # ls -dZ /mnt/test1
    drwxrwxrwt. root root system_u:object_r:nfs_t:s0       /mnt/test1
    # ls -dZ /mnt/test2
    drwxrwxrwt. root root system_u:object_r:nfs_t:s0       /mnt/test2

When we call into SELinux to set the context of a "cloned" superblock,
it will currently just bail out when it notices that we're reusing an
existing superblock. Since the existing superblock is already set up and
presumably in use, we can't go overwriting its context with the one from
the "original" sb. Because of this, the second context= option in this
case cannot take effect.

This patch fixes this by turning security_sb_clone_mnt_opts into an int
return operation. When it finds that the "new" superblock that it has
been handed is already set up, it checks to see whether the contexts on
the old superblock match it. If it does, then it will just return
success, otherwise it'll return -EBUSY and emit a printk to tell the
admin why the second mount failed.

Note that this patch may cause casualties. The NFSv4 code relies on
being able to walk down to an export from the pseudoroot. If you mount
filesystems that are nested within one another with different contexts,
then this patch will make those mounts fail in new and "exciting" ways.

For instance, suppose that /export is a separate filesystem on the
server:

    # mount server:/ /mnt/test1
    # mount salusa:/export /mnt/test2 -o context=system_u:object_r:tmp_t:s0
    mount.nfs: an incorrect mount option was specified

...with the printk in the ring buffer. Because we *might* eventually
walk down to /mnt/test1/export, the mount is denied due to this patch.
The second mount needs the pseudoroot superblock, but that's already
present with the wrong context.

OTOH, if we mount these in the reverse order, then both mounts work,
because the pseudoroot superblock created when mounting /export is
discarded once that mount is done. If we then however try to walk into
that directory, the automount fails for the similar reasons:

    # cd /mnt/test1/scratch/
    -bash: cd: /mnt/test1/scratch: Device or resource busy

The story I've gotten from the SELinux folks that I've talked to is that
this is desirable behavior. In SELinux-land, mounting the same data
under different contexts is wrong -- there can be only one.

Cc: Steve Dickson <steved@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>
      094f7b69
  7. 15 1月, 2013 1 次提交
    • P
      tun: fix LSM/SELinux labeling of tun/tap devices · 5dbbaf2d
      由 Paul Moore 提交于 
      This patch corrects some problems with LSM/SELinux that were introduced
with the multiqueue patchset.  The problem stems from the fact that the
multiqueue work changed the relationship between the tun device and its
associated socket; before the socket persisted for the life of the
device, however after the multiqueue changes the socket only persisted
for the life of the userspace connection (fd open).  For non-persistent
devices this is not an issue, but for persistent devices this can cause
the tun device to lose its SELinux label.

We correct this problem by adding an opaque LSM security blob to the
tun device struct which allows us to have the LSM security state, e.g.
SELinux labeling information, persist for the lifetime of the tun
device.  In the process we tweak the LSM hooks to work with this new
approach to TUN device/socket labeling and introduce a new LSM hook,
security_tun_dev_attach_queue(), to approve requests to attach to a
TUN queue via TUNSETQUEUE.

The SELinux code has been adjusted to match the new LSM hooks, the
other LSMs do not make use of the LSM TUN controls.  This patch makes
use of the recently added "tun_socket:attach_queue" permission to
restrict access to the TUNSETQUEUE operation.  On older SELinux
policies which do not define the "tun_socket:attach_queue" permission
the access control decision for TUNSETQUEUE will be handled according
to the SELinux policy's unknown permission setting.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Acked-by: NEric Paris <eparis@parisplace.org>
Tested-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5dbbaf2d
  9. 14 12月, 2012 2 次提交
  11. 12 10月, 2012 1 次提交
  13. 21 9月, 2012 1 次提交
  15. 08 9月, 2012 1 次提交
    • M
      ima: add ima_inode_setxattr/removexattr function and calls · 42c63330
      由 Mimi Zohar 提交于 
      Based on xattr_permission comments, the restriction to modify 'security'
xattr is left up to the underlying fs or lsm. Ensure that not just anyone
can modify or remove 'security.ima'.

Changelog v1:
- Unless IMA-APPRAISE is configured, use stub ima_inode_removexattr()/setxattr()
  functions.  (Moved ima_inode_removexattr()/setxattr() to ima_appraise.c)

Changelog:
  - take i_mutex to fix locking (Dmitry Kasatkin)
  - ima_reset_appraise_flags should only be called when modifying or
    removing the 'security.ima' xattr. Requires CAP_SYS_ADMIN privilege.
    (Incorporated fix from Roberto Sassu)
  - Even if allowed to update security.ima, reset the appraisal flags,
    forcing re-appraisal.
  - Replace CAP_MAC_ADMIN with CAP_SYS_ADMIN
  - static inline ima_inode_setxattr()/ima_inode_removexattr() stubs
  - ima_protect_xattr should be static
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com>
      42c63330
  17. 06 9月, 2012 1 次提交
  19. 03 7月, 2012 1 次提交
    • P
      security: Fix nommu build. · 75331a59
      由 Paul Mundt 提交于 
      The security + nommu configuration presently blows up with an undefined
reference to BDI_CAP_EXEC_MAP:

security/security.c: In function 'mmap_prot':
security/security.c:687:36: error: dereferencing pointer to incomplete type
security/security.c:688:16: error: 'BDI_CAP_EXEC_MAP' undeclared (first use in this function)
security/security.c:688:16: note: each undeclared identifier is reported only once for each function it appears in

include backing-dev.h directly to fix it up.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>
      75331a59
  21. 02 7月, 2012 1 次提交
    • P
      security: Fix nommu build. · 659b5e76
      由 Paul Mundt 提交于 
      The security + nommu configuration presently blows up with an undefined
reference to BDI_CAP_EXEC_MAP:

security/security.c: In function 'mmap_prot':
security/security.c:687:36: error: dereferencing pointer to incomplete type
security/security.c:688:16: error: 'BDI_CAP_EXEC_MAP' undeclared (first use in this function)
security/security.c:688:16: note: each undeclared identifier is reported only once for each function it appears in

include backing-dev.h directly to fix it up.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>
      659b5e76
  23. 01 6月, 2012 3 次提交
  25. 10 4月, 2012 1 次提交
  27. 14 2月, 2012 2 次提交
  29. 10 2月, 2012 1 次提交
  31. 07 1月, 2012 1 次提交
  33. 06 1月, 2012 5 次提交
    • E
      security: remove the security_netlink_recv hook as it is equivalent to capable() · fd778461
      由 Eric Paris 提交于 
      Once upon a time netlink was not sync and we had to get the effective
capabilities from the skb that was being received.  Today we instead get
the capabilities from the current task.  This has rendered the entire
purpose of the hook moot as it is now functionally equivalent to the
capable() call.
Signed-off-by: NEric Paris <eparis@redhat.com>
      fd778461
    • E
      capabilities: remove all _real_ interfaces · 2920a840
      由 Eric Paris 提交于 
      The name security_real_capable and security_real_capable_noaudit just don't
make much sense to me.  Convert them to use security_capable and
security_capable_noaudit.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NSerge E. Hallyn <serge.hallyn@canonical.com>
      2920a840
    • E
      capabilities: introduce security_capable_noaudit · c7eba4a9
      由 Eric Paris 提交于 
      Exactly like security_capable except don't audit any denials.  This is for
places where the kernel may make decisions about what to do if a task has a
given capability, but which failing that capability is not a sign of a
security policy violation.  An example is checking if a task has
CAP_SYS_ADMIN to lower it's likelyhood of being killed by the oom killer.
This check is not a security violation if it is denied.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NSerge E. Hallyn <serge.hallyn@canonical.com>
      c7eba4a9
    • E
      capabilities: reverse arguments to security_capable · b7e724d3
      由 Eric Paris 提交于 
      security_capable takes ns, cred, cap.  But the LSM capable() hook takes
cred, ns, cap.  The capability helper functions also take cred, ns, cap.
Rather than flip argument order just to flip it back, leave them alone.
Heck, this should be a little faster since argument will be in the right
place!
Signed-off-by: NEric Paris <eparis@redhat.com>
      b7e724d3
    • E
      capabilities: remove the task from capable LSM hook entirely · 6a9de491
      由 Eric Paris 提交于 
      The capabilities framework is based around credentials, not necessarily the
current task.  Yet we still passed the current task down into LSMs from the
security_capable() LSM hook as if it was a meaningful portion of the security
decision.  This patch removes the 'generic' passing of current and instead
forces individual LSMs to use current explicitly if they think it is
appropriate.  In our case those LSMs are SELinux and AppArmor.

I believe the AppArmor use of current is incorrect, but that is wholely
unrelated to this patch.  This patch does not change what AppArmor does, it
just makes it clear in the AppArmor code that it is doing it.

The SELinux code still uses current in it's audit message, which may also be
wrong and needs further investigation.  Again this is NOT a change, it may
have always been wrong, this patch just makes it clear what is happening.
Signed-off-by: NEric Paris <eparis@redhat.com>
      6a9de491
  35. 04 1月, 2012 7 次提交
  37. 19 10月, 2011 1 次提交
  39. 15 9月, 2011 1 次提交
  41. 10 9月, 2011 1 次提交
  43. 20 7月, 2011 2 次提交
  45. 19 7月, 2011 2 次提交