- 26 3月, 2010 6 次提交
-
-
由 Wey-Yi Guy 提交于
uCode alive for iwlagn based devices share the same functions. Move those functions from iwl-5000.c to iwl-agn-ucode.c. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Multiple iwlagn based devices shared the same hw definitions. Move device hardware related defines from iwl-5000-hw.h to iwl-agn-hw.h file. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Multiple iwlagn based devices shared the same tansmit queue functions. Move tx queue related code from iwl-5000.c to iwl-agn-tx.c file. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Multiple iwlagn based devices shared the same hcmd related functions. Move from iwl-5000.c to iwl-agn-hcmd.c file. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Loading uCode functions are shared across multiple agn devices. Move those functions to iwl-agn-ucode.c file with other uCode related functions. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Multiple iwlagn based devices shared the same ucode loading procedure. Move loading related code from iwl-5000.c to iwl-agn-ucode.c file. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 20 3月, 2010 4 次提交
-
-
由 Wey-Yi Guy 提交于
Split the connectivity check and recovery routine into separated functions based on the types 1. iwl_good_ack_health() - check for ack count 2. iwl_good_plcp_health() - check for plcp error Based on the type of errors being detected, different recovery methods will be used to bring the system back to normal operational state. Because different NIC has different HW and uCode, the behavior is also different; these functions thus now form part of the ops infrastructure, so we can have more control on how to monitor and recover from error condition case per device. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Move the plcp error checking into stand alone function and pointed by ops to accommodate devices not needing this recovery. Signed-off-by: NTrieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Monitors the internal TX queues periodically. When a queue is stuck for some unknown conditions causing the throughput to drop and the transfer is stop, the driver will force firmware reload and bring the system back to normal operational state. The iwlwifi devices behave differently in this regard so this feature is made part of the ops infrastructure so we can have more control on how to monitor and recover from tx queue stall case per device. Signed-off-by: NTrieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Shanyu Zhao 提交于
Align the driver names with official product names for 1000/5000/6000 series. This change mainly affects the debug messages show up in system log. No functional changes. Signed-off-by: NShanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 10 3月, 2010 1 次提交
-
-
由 Johannes Berg 提交于
All the ICT ISR code is iwlagn specific, and doesn't need to be in iwlcore. So create a new iwl-agn.h header file that will hold agn specific function declarations etc., and move the ICT code into a new iwl-agn-ict.c file that is linked into iwlagn. This also gets rid of exporting those symbols. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 12 2月, 2010 1 次提交
-
-
由 Trieu 'Andrew' Nguyen 提交于
While testing the station with the NIC 1000 family, it is found that the plcp error can easily exceed 50 value in 100mSecs. This creates unneccessary radio reset/tuning. This patch raises the PLCP error threshold of the NIC 1000 from 50 to 200 error count. Signed-off-by: NTrieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 09 2月, 2010 1 次提交
-
-
由 Ben Cahill 提交于
6x50 device requires a different scaling factor for Rx gain values sent to device via PHY_CALIBRATION_CMD (CHAIN_NOISE_GAIN_CMD). Rather than create a new iwlXXXX_gain_computation() function, add new chain_noise_scale member to struct iwl_cfg, and keep using iwl5000_gain_computation(). Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 1月, 2010 1 次提交
-
-
由 Wey-Yi Guy 提交于
Update sensitivity range values for 1000 series Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 26 1月, 2010 2 次提交
-
-
由 Reinette Chatre 提交于
Add function pointer for broadcast station addition so that we can call it in from iwlcore at a later time. We only distinguish between iwlagn and iwl3945 broadcast station addition. For the iwl3945 station addition we add that function to iwlcore since that is where most station functionality resides, making it part of iwl3945 will require significant code reorganization that will dilute station management functionality. This seems to be an efficient solution. It may seem as though we are removing error checking when adding the 3945 broadcast station but this error checking was never really necessary since the function returns the station id and the broadcast station id is always set. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Trieu 'Andrew' Nguyen 提交于
We have seen the throughput dropped due to external noisy environment and the radio is out of tune. There are lot of plcp errors indicating this condition. Eventually the station can get de-authenticated by the Access Point. By resetting and tuning the radio, the plcp errors are reduced or eliminated and the throughput starts to rise. To prevent unexpected behavior such as drop in throughput or deauthentication, - The change provides the driver feature to monitor and tune the radio base on the statistics notification from the uCode. - It also allows the setting of the plcp error rate threshold via the plcp_delta under debugfs interface. Signed-off-by: NTrieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 1月, 2010 2 次提交
-
-
由 Reinette Chatre 提交于
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Flowhandler handle the communication between driver and uCode, when any uCode error happen, we also like to know what is the status of the flowhandler; it can help to debug flowhandler related problem. Also adding debugfs file to dump current value of flowhandler registers. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 12月, 2009 2 次提交
-
-
由 Emese Revfy 提交于
Signed-off-by: NEmese Revfy <re.emese@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Instead of hard-coding the SM PS mode per hardware, this makes iwlwifi support the new mac80211 API for controlling the SM PS mode. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 12月, 2009 1 次提交
-
-
由 Wey-Yi Guy 提交于
When uCode HW/SW error detected, dumping important CSR (Control and Status Registers) values. Also add "csr" debugfs file to dump the current values of CSR defined in CSR table to syslog. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 11月, 2009 1 次提交
-
-
由 Wey-Yi Guy 提交于
Setting "Spatial multiplexing Power Save" as part of per device configuration parameter. Report to uCode based on priv->conf setting, so driver can have more control of how different devices should operate in power save mode. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 11月, 2009 2 次提交
-
-
由 John W. Linville 提交于
I may have botched my merge conflict resolution instructions for Dave... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wey-Yi Guy 提交于
Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: NJiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 11月, 2009 1 次提交
-
-
由 Wey-Yi Guy 提交于
Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: NJiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 11月, 2009 1 次提交
-
-
由 Ben Cahill 提交于
Invoke workaround to avoid instability in L0->L0S->L1 transition on PCIe bus. Workaround disables L0S state so device moves directly from L0->L1. Workaround needed on all devices since and including 4965; add to 6000/1000. Describe bug and workaround better in comments. Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 10月, 2009 4 次提交
-
-
由 Wey-Yi Guy 提交于
Using device configuration structure to decide how to configure ct_kill host command. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Cahill 提交于
Consolidate most iwlXXXX_apm_init() functions into single iwl_apm_init(). Keep iwl3945_apm_init(), but leverage iwl_apm_init() for most functionality. Update 4965 init sequence to follow most recent factory recommendations. Add following members to struct iwl_cfg to guide the init sequence: pll_cfg_val (replaces needs_pll_cfg), set_l0s, use_bsm Move L0S enable/disable from nic_config() functions to iwl_apm_init(). This satisifies the "FIXME: put here L1A -L0S w/a" notice, and complies with factory-recommended sequence. Add debug info message in iwl_apm_init(), and symmetrical message in iwl_apm_stop(). Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Instead of always allocate the max number of tx queue structure, use dynamic allocation based on the number of queues in device configuration. With these changes, device does not have to allocate more memory than the h/w can support. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Cahill 提交于
Clean up device-specific apm_reset() functions and library infrastructure, now that these reset() functions are no longer being used. Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 10月, 2009 8 次提交
-
-
由 Abhijeet Kolekar 提交于
Unify the usage of apm_stop_master and apm_stop across all hardwares. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The iwlwifi drivers have LED blinking requirements that mac80211 cannot fulfill due to the use of just a single LED instead of different ones for TX, RX, radio etc. Instead, the single LED blinks according to transfers and is solid on the rest of the time. As such, having LED class devices registered that mac80211 triggers are connected to is pointless as we don't use the triggers anyway. Remove all the useless code and add hooks into the driver itself. At the same time, make the LED code abstracted so the core code that determines blink rate etc. can be shared between 3945 and agn in iwlcore. At the same time, the fact that we removed the use of the mac80211 LED triggers means we can also remove the IWLWIFI_LEDS Kconfig symbol since the LED support is now self-contained. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Huaxu Wan 提交于
The module firmware information of 1000 series is missing from iwlagn. Signed-off-by: NHuaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Adding support of Chain Noise Calibration for 6000 series NICs. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Update PCI Subsystem ID for 1000 series based on HW SKU. Adding new SKU for "BG" only devices. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Update EEPROM version requirement for 1000 and 6000 series of NIC for EEPROM version verification. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Adjust led blink rate to compensate on a MAC Clock difference on every HW. Led blink rate analysis showed an average deviation of 0% on 3945, 5% on 4965 HW and 20% on 5000 series and up. Need to compensate on the led on/off time per HW according to the deviation to achieve the desired led frequency The calculation is: (100-averageDeviation)/100 * blinkTime For code efficiency the calculation will be: compensation = (100 - averageDeviation) * 64 / 100 NewBlinkTime = (compensation * BlinkTime) / 64 Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Different NIC has different requirements for configuration. Currently all 5000 series hardware and later share the same configuration function even though they do not need the same configurations. Fix this by separating the needed configuration actions for each hardware model. .5000 series: L1-ASPM H/W bug work-around configure radio write CSR_HW_IF_CONFIG_REG for uCode use work-around for NIC get stuck after early PCIe power off .1000 series: write CSR_HW_IF_CONFIG_REG for uCode use setting digital SVR for 1000 card to 1.32V .6000 series: configure radio write CSR_HW_IF_CONFIG_REG for uCode use write CSR_GP_DRIVER_REG to indicate radio sku Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 9月, 2009 1 次提交
-
-
由 Reinette Chatre 提交于
When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 8月, 2009 1 次提交
-
-
由 Daniel C Halperin 提交于
Green-field mode should be configured in the HT station table. This patch uses both the per-station GF support flag as well as the current BSS HT operation mode (non-GF stations present flag). Added the "ht_greenfield_support" field to struct iwl_cfg to replace the device-specific check in rs_use_green(). That check has been moved to iwlcore_init_ht_hw_capab(). Signed-off-by: NDaniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-