- 01 10月, 2010 1 次提交
-
-
由 Chris Wilson 提交于
Only drm/i915 does the bookkeeping that makes the information useful, and the information maintained is driver specific, so move it out of the core and into its single user. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com>
-
- 30 9月, 2010 6 次提交
-
-
由 Simon Que 提交于
Added a function that sets the LVDS values to default settings. This will be called by intel_init_bios before checking for the VBT (video BIOS table). The default values are thus loaded regardless of whether a VBT is found. The default settings in each parse function have been moved to the new function. This consolidates all the default settings into one place. The default dither bit value has been changed from 0 to 1. We can assume that display devices will want dithering enabled. Signed-off-by: NSimon Que <sque@chromium.org> Acked-by: NOlof Johansson <olof@lixom.net> [ickle: fixup for -next] Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
At that point as the object is no longer in any GPU write domain it must not be on the list, so the list_del() is redundant. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
... and check more regularly. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 29 9月, 2010 5 次提交
-
-
由 Chris Wilson 提交于
Just reschedule the retire requests again if the device is currently busy. The request list will be pruned along other paths so will never grow unbounded and so we can afford to miss the occasional pruning. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Replaced by tracepoints. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
This has bitrotted through inuse and superseded by tracing and debugfs. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 28 9月, 2010 7 次提交
-
-
由 Chris Wilson 提交于
This check only appears to succeed when using GMBUS, so we need to skip it if we have fallen back to using GPIO bit banging. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
There are several reported instances of GMBUS failing to successfully read the EDID, so revert back to bit banging until the issue is resolved. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30371Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Besides a couple of bugs when writing more than a single byte along the GMBUS, SDVO was completely failing whilst trying to use GMBUS, so use bit banging instead. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
With multiple rings generating requests independently, the outstanding requests must also be track independently. Reported-by: NWang Jinjin <jinjin.wang@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30380Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Jesse Barnes 提交于
The IPS driver needs to know the current power consumption of the GMCH in order to make decisions about when to increase or decrease the CPU and/or GPU power envelope. So fix up the divisions to save the results so the numbers are actually correct (contrary to some earlier comments and code, these functions do not modify the first argument and use it for the result). Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
- 27 9月, 2010 2 次提交
-
-
由 Chris Wilson 提交于
Introduced by 48b956c5, I had thought I had already fixed this. Oh well. Reported-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
There is no equivalent to mutex_destroy() for spinlocks so just delete the code. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 26 9月, 2010 1 次提交
-
-
由 Chris Wilson 提交于
Daniel Vetter pointed out that in this case is would be clearer and cleaner to use a spinlock instead of a mutex to protect the per-file request list manipulation. Make it so. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 25 9月, 2010 8 次提交
-
-
由 Daniel Vetter 提交于
It's the same code, essentially, so kill all copies safe one unified version. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Daniel Vetter 提交于
All functions are extremely similar, so fold them into one generic implementation. This function isn't used anyway, because there's not yet a bsd ring error state dumper. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Daniel Vetter 提交于
Two macros that use a base address for HWS_PGA were missing, add them. Also switch the remaining users of *_ACTHD to the ring-base one. Kill the other ring-specific macros because they're now unused. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> [ickle: And silence checkpatch whilst in the vicinity] Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Daniel Vetter 提交于
This was mixed up in the following patch: commit a6c45cf0 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Sep 17 00:32:17 2010 +0100 drm/i915: INTEL_INFO->gen supercedes i8xx, i9xx, i965g Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Daniel Vetter 提交于
Everything is now handled in intel-gtt.h so these defines are only confusing. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
... and combine it with the wedged completion handler. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Owain Ainsworth reported an issue between the interaction of the hangcheck and userspace immediately (and permanently) falling back to s/w rasterisation. In order to break the mutex and begin resetting the GPU, we must abort the current operation (usually within the wait) and climb sufficiently far back up the call chain to drop the mutex. In his implementation, Owain has a loop within the ioctl handler to detect the hang and then sleep until the error handler has run. I've chosen to return to userspace and report an EAGAIN which should trigger the userspace ioctl handler to repeat the call (simply because it felt less invasive...). Before hitting a wedged GPU, we then wait upon completion of the error handler. Reported-by: NOwain G. Ainsworth <zerooa@googlemail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Avoid cause latencies in other clients by not taking the global struct mutex and moving the per-client request manipulation a local per-client mutex. For example, this allows a compositor to schedule a page-flip (through X) whilst an OpenGL application is monopolising the GPU. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 24 9月, 2010 10 次提交
-
-
由 Hette Visser 提交于
This patch fixes the black screen bug on Dell e6510, by adding two delays to give the eDP panel time to turn on before we continue with the next write. 300ms is rather arbitray and a rather long sleep, we need to find a way of refining this value. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29278Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jan Beulich 提交于
In commit e517a5e9 the call to map_page_into_agp() got removed from intel_i830_setup_flush(), but the counterpart call from intel_i830_fini_flush() to unmap_page_from_agp() was left in place. Additionally, the page allocated here never gets its physical address used for sending to hardware, so there's no need to allocate it with GFP_DMA32. Nor is __GFP_ZERO really necessary, as the page is used only to store data to force flushing of some internal processor state. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
First step, lets have a look at the values for troublesome panels and see if they may be used to improve our link training. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
We need to drain the pending flips prior to disabling the pipe during modeset, and these need to be done in an uninterruptible fashion. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
This is now private to the DVO connector, remove it from the main device private. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
As we presume space is signed when computing and looking for wrap along, make it so. Reported-by: NOwain G. Ainsworth <zerooa@googlemail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
These have served their purpose and are now just noise in the debug stream. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
Try to validate the panel's connection by writing to address 0xA0. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18072Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
In the event that the external chipset doesn't implement the GET_SUPPORTED_ENHANCEMENTS commands, gracefully treat it as having no enhancments rather than bailing. Reported-and-tested-by: NWoody Suwalski <terraluna977@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18342Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-