And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too and remove useless
casts.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move away from NLMSG_NEW() as well.

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too, and remove useless
casts.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.

Also, remove pointless kernel log message.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.

Also, free and NULL out skb when nlmsg_put() fails and remove
pointless kernel log message.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use nlmsg_data() while we're here too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The NLMSG_PUT() macro contains a hidden goto which makes the code hard
to audit and very error prone.

While been there also use the inline function nlmsg_data() instead of the
NLMSG_DATA() macro to do explicit type checking.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

team_adjust_ops should check for enabled ports, not all ports.
This may lead to division by zero. This patch fixes this.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add monitor receive callback to the TX datapath to catch all the
data sent to transceivers.
Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The AT86RF231 is a feature rich, low-power 2.4 GHz radio transceiver
designed for industrial and consumer ZigBee/IEEE 802.15.4, 6LoWPAN,
RF4CE and high data rate 2.4 GHz ISM band applications.

This patch adds support for the Atmel RF230/231 radio transceivers.
Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Basic preparations to start the interface.
Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A new method to set page and channel values for a transceiver
was added to the MIB.
Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A method to assign the IEEE802.15.4 short address was added to the
MIB implementation.
Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Two methods intended to get and set the Private Area Network identifier
were added to the MIB implementation.
Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Every real 802.15.4 transceiver, which works with software MAC layer,
can be classified as a wpan device in this stack. So the wpan device
implementation provides missing link in datapath between the device
drivers and the Linux network queue.

According to the IEEE 802.15.4 standard each packet can be one of the
following types:
 - beacon
 - MAC layer command
 - ACK
 - data

This patch adds support for the data packet-type only, but this is
enough to perform data transmission and receiving over radio.
Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This code is easier to read if we specify which flags we want at the
condition instead of at the top of the function.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And account for the fact that, when we are not forwarding, we should
bump statistic counters rather than emit an ICMP response.

RP-filter rejected lookups are still not cached.

Since -EHOSTUNREACH and -ENETUNREACH can now no longer be seen in
ip_rcv_finish(), remove those checks.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv4 routing cache entries no longer use dst->expires, because the
metrics, PMTU, and redirect information are stored in the inetpeer
cache.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During the last merge involving translation-table.c something went wrong and two
lines disappeared from translation-table.c. This patch recovers them.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During the last conflict resolution involving translation-table.c something went
wrong and a condition in the AP isolation code was reversed. This patch fixes
this problem.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sh_eth_reset function resets chip, but this performs nothing when failed.
This changes sh_eth_reset return an error, when this failed in reset.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ethernet IP of SH7734 and R8A7740 has selecting MII register.
The user needs to change a value according to MII to be used.
This adds the function to change the value of this register.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to allow IPv6 packets originating locally to match rules with the "iff"
set to "lo".  This allows IPv6 rule matching work the same as it does for
IPv4.  From the iproute2 man page:

   iif NAME
		  select  the incoming device to match.  If the interface is loop‐
		  back, the rule only matches packets originating from this  host.
		  This  means that you may create separate routing tables for for‐
		  warded and local packets and, hence, completely segregate them.
Signed-off-by: NDavid McCullough <david_mccullough@mcafee.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove use of module parameters on caif hsi device, as
rtnl configuration parameters are already supported.

All caif hsi configuration data is put in cfhsi_config,
and default values in hsi_default_config.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove use of struct platform_device, and replace it with
struct cfhsi_ops. Updated variable names in the same
spirit:
cfhsi_get_dev to cfhsi_get_ops,
cfhsi->dev to cfhsi->ops and,
cfhsi->dev.drv to cfhsi->ops->cb_ops.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add RTNL support for managing the caif hsi interface.
The HSI HW interface is no longer registering as a device,
instead we use symbol_get to get hold of the HSI API.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update drawing and remove description of old features.
Add HSI and USB link layers to the drawing.
Reported-by: NJoerg Reisenweber <joerg.reisenweber@stericssion.com>
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove assignment at declaration when not needed.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace dev_X with the corresponding netdev_X print
function when applicable.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericssion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aggregation_timeout is an unsigned long,
a test for less than zero can never become true,
compare with zero instead.
Signed-off-by: NKim Lilliestierna <kim.xx.lilliestierna@stericsson.com>
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>