Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 07 5月, 2012 1 次提交
  3. 19 4月, 2012 1 次提交
  5. 29 3月, 2012 1 次提交
    • R
      x86/apic/amd: Be more verbose about LVT offset assignments · 8abc3122
      由 Robert Richter 提交于 
      Add information about LVT offset assignments to better debug firmware
bugs related to this. See following examples.

 # dmesg | grep -i 'offset\|ibs'
 LVT offset 0 assigned for vector 0xf9
 [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
 [Firmware Bug]: cpu 0, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
 Failed to setup IBS, -22

In this case the BIOS assigns both offsets for MCE (0xf9) and IBS
(0x400) vectors to offset 0, which is why the second APIC setup (IBS)
failed.

With correct setup you get:

 # dmesg | grep -i 'offset\|ibs'
 LVT offset 0 assigned for vector 0xf9
 LVT offset 1 assigned for vector 0x400
 IBS: LVT offset 1 assigned
 perf: AMD IBS detected (0x00000007)
 oprofile: AMD IBS detected (0x00000007)

Note: The vector includes also the message type to handle also NMIs
(0x400). In the firmware bug message the format is the same as of the
APIC500 register and includes the mask bit (bit 16) in addition.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      8abc3122
  7. 24 12月, 2011 2 次提交
  9. 18 12月, 2011 1 次提交
  11. 14 12月, 2011 1 次提交
    • F
      x86: Add per-cpu stat counter for APIC ICR read tries · 346b46be
      由 Fernando Luis Vázquez Cao 提交于 
      In the IPI delivery slow path (NMI delivery) we retry the ICR
read to check for delivery completion a limited number of times.

[ The reason for the limited retries is that some of the places
  where it is used (cpu boot, kdump, etc) IPI delivery might not
  succeed (due to a firmware bug or system crash, for example)
  and in such a case it is better to give up and resume
  execution of other code. ]

This patch adds a new entry to /proc/interrupts, RTR, which
tells user space the number of times we retried the ICR read in
the IPI delivery slow path.

This should give some insight into how well the APIC
message delivery hardware is working - if the counts are way
too large then we are hitting a (very-) slow path way too
often.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Jörn Engel <joern@logfs.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/n/tip-vzsp20lo2xdzh5f70g0eis2s@git.kernel.org
[ extended the changelog ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      346b46be
  13. 12 12月, 2011 1 次提交
    • F
      x86: Call idle notifier after irq_enter() · 98ad1cc1
      由 Frederic Weisbecker 提交于 
      Interrupts notify the idle exit state before calling irq_enter().
But the notifier code calls rcu_read_lock() and this is not
allowed while rcu is in an extended quiescent state. We need
to wait for irq_enter() -> rcu_idle_exit() to be called before
doing so otherwise this results in a grumpy RCU:

[    0.099991] WARNING: at include/linux/rcupdate.h:194 __atomic_notifier_call_chain+0xd2/0x110()
[    0.099991] Hardware name: AMD690VM-FMH
[    0.099991] Modules linked in:
[    0.099991] Pid: 0, comm: swapper Not tainted 3.0.0-rc6+ #255
[    0.099991] Call Trace:
[    0.099991]  <IRQ>  [<ffffffff81051c8a>] warn_slowpath_common+0x7a/0xb0
[    0.099991]  [<ffffffff81051cd5>] warn_slowpath_null+0x15/0x20
[    0.099991]  [<ffffffff817d6fa2>] __atomic_notifier_call_chain+0xd2/0x110
[    0.099991]  [<ffffffff817d6ff1>] atomic_notifier_call_chain+0x11/0x20
[    0.099991]  [<ffffffff81001873>] exit_idle+0x43/0x50
[    0.099991]  [<ffffffff81020439>] smp_apic_timer_interrupt+0x39/0xa0
[    0.099991]  [<ffffffff817da253>] apic_timer_interrupt+0x13/0x20
[    0.099991]  <EOI>  [<ffffffff8100ae67>] ? default_idle+0xa7/0x350
[    0.099991]  [<ffffffff8100ae65>] ? default_idle+0xa5/0x350
[    0.099991]  [<ffffffff8100b19b>] amd_e400_idle+0x8b/0x110
[    0.099991]  [<ffffffff810cb01f>] ? rcu_enter_nohz+0x8f/0x160
[    0.099991]  [<ffffffff810019a0>] cpu_idle+0xb0/0x110
[    0.099991]  [<ffffffff817a7505>] rest_init+0xe5/0x140
[    0.099991]  [<ffffffff817a7468>] ? rest_init+0x48/0x140
[    0.099991]  [<ffffffff81cc5ca3>] start_kernel+0x3d1/0x3dc
[    0.099991]  [<ffffffff81cc5321>] x86_64_start_reservations+0x131/0x135
[    0.099991]  [<ffffffff81cc5412>] x86_64_start_kernel+0xed/0xf4
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Henroid <andrew.d.henroid@intel.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
      98ad1cc1
  15. 10 11月, 2011 1 次提交
  17. 21 9月, 2011 2 次提交
  19. 27 7月, 2011 1 次提交
  21. 13 7月, 2011 1 次提交
  23. 09 7月, 2011 1 次提交
    • V
      x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit · 14cb6dcf
      由 Vivek Goyal 提交于 
      nr_cpus allows one to specify number of possible cpus in the system.
Current assumption seems to be that first cpu to show up is boot cpu
and this assumption will be broken in kdump scenario where we can be
booting on a non boot cpu with nr_cpus=1.

It might happen that first cpu we parse is not the cpu we boot on and
later we ignore boot cpu. Though code later seems to recognize this
anomaly and forcibly sets boot cpu in physical cpu map with following
warning.

if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
        printk(KERN_WARNING
                "weird, boot CPU (#%d) not listed by the BIOS.\n",
                hard_smp_processor_id());

        physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}

This patch waits for boot cpu to show up and starts ignoring the cpus
once we have hit (nr_cpus - 1) number of cpus. So effectively we are
reserving one slot out of nr_cpus for boot cpu explicitly.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20110708171926.GF2930@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      14cb6dcf
  25. 09 6月, 2011 2 次提交
  27. 30 5月, 2011 1 次提交
  29. 20 5月, 2011 1 次提交
  31. 02 5月, 2011 2 次提交
    • T
      x86-32, NUMA: Make apic->x86_32_numa_cpu_node() optional · 84914ed0
      由 Tejun Heo 提交于 
      NUMAQ is the only meaningful user of this callback and
setup_local_APIC() the only callsite.  Stop torturing everyone else by
making the callback optional and removing all the boilerplate
implementations and assignments.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
      84914ed0
    • T
      x86-32, NUMA: Automatically set apicid -> node in setup_local_APIC() · c4b90c11
      由 Tejun Heo 提交于 
      Some x86-32 NUMA implementations (NUMAQ) don't initialize apicid ->
node mapping using set_apicid_to_node() during NUMA init but implement
custom apic->x86_32_numa_cpu_node() instead.

This patch automatically initializes the default apic -> node mapping
table from apic->x86_32_numa_cpu_node() from setup_local_APIC() such
that the mapping table is in sync with the actual mapping.

As the table isn't used by custom implementations, this doesn't make
any difference at this point.  This is in preparation of unifying
numa_cpu_node() between x86-32 and 64.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
      c4b90c11
  33. 20 4月, 2011 1 次提交
    • Y
      x86, apic: Print verbose error interrupt reason on apic=debug · 2b398bd9
      由 Youquan Song 提交于 
      End users worry about the error interrupt printout we generate
currently:

	pr_debug("APIC error on CPU%d: %02x(%02x)\n",
	smp_processor_id(), v , v1);

... and would like to know the reason why error interrupts are generated.

This patch prints out more detailed debug information.

Another practical problem is that dynamic debug is not initialized yet
when the APIC initializes, so the pr_debug() will not output the error
interrupt debug information on bootup. In this patch, we use
apic_printk(APIC_DEBUG, ...), so the apic=debug boot option will print
verbose error interupts during bootup.
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: hpa@linux.intel.com
Cc: suresh.b.siddha@intel.com
Cc: yong.y.wang@linux.intel.com
Cc: jbaron@redhat.com
Cc: trenn@suse.de
Cc: kent.liu@intel.com
Cc: chaohong.guo@intel.com
Link: http://lkml.kernel.org/r/1302762968-24380-2-git-send-email-youquan.song@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      2b398bd9
  35. 29 3月, 2011 1 次提交
    • C
      x86: A fast way to check capabilities of the current cpu · 349c004e
      由 Christoph Lameter 提交于 
      Add this_cpu_has() which determines if the current cpu has a certain
ability using a segment prefix and a bit test operation.

For that we need to add bit operations to x86s percpu.h.

Many uses of cpu_has use a pointer passed to a function to determine
the current flags. That is no longer necessary after this patch.

However, this patch only converts the straightforward cases where
cpu_has is used with this_cpu_ptr. The rest is work for later.

-tj: Rolled up patch to add x86_ prefix and use percpu_read() instead
     of percpu_read_stable().
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NTejun Heo <tj@kernel.org>
      349c004e
  37. 24 3月, 2011 1 次提交
    • R
      x86: Use syscore_ops instead of sysdev classes and sysdevs · f3c6ea1b
      由 Rafael J. Wysocki 提交于 
      Some subsystems in the x86 tree need to carry out suspend/resume and
shutdown operations with one CPU on-line and interrupts disabled and
they define sysdev classes and sysdevs or sysdev drivers for this
purpose.  This leads to unnecessarily complicated code and excessive
memory usage, so switch them to using struct syscore_ops objects for
this purpose instead.

Generally, there are three categories of subsystems that use
sysdevs for implementing PM operations: (1) subsystems whose
suspend/resume callbacks ignore their arguments entirely (the
majority), (2) subsystems whose suspend/resume callbacks use their
struct sys_device argument, but don't really need to do that,
because they can be implemented differently in an arguably simpler
way (io_apic.c), and (3) subsystems whose suspend/resume callbacks
use their struct sys_device argument, but the value of that argument
is always the same and could be ignored (microcode_core.c).  In all
of these cases the subsystems in question may be readily converted to
using struct syscore_ops objects for power management and shutdown.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
      f3c6ea1b
  39. 11 3月, 2011 1 次提交
  41. 25 2月, 2011 1 次提交
    • T
      x86: dt: Cleanup local apic setup · a906fdaa
      由 Thomas Gleixner 提交于 
      Up to now we force enable the local apic in the devicetree setup
uncoditionally and set smp_found_config unconditionally to 1 when a
devicetree blob is available. This breaks, when local apic is disabled
in the Kconfig.

Make it consistent by initializing device tree explicitely before
smp_get_config() so a non lapic configuration could be used as well.
To be functional that would require to implement PIT as an interrupt
host, but the only user of this code until now is ce4100 which
requires apics to be available. So we leave this up to those who need
it.
Tested-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      a906fdaa
  43. 23 2月, 2011 2 次提交
  45. 14 2月, 2011 1 次提交
    • Y
      x86: Fix and clean up generic_processor_info() · e5fea868
      由 Yinghai Lu 提交于 
      One of the error printouts in generic_processor_info() prints out
the APIC version instead of the cpu index the warning text describes.

Move version validation down, after we get the right cpu index.

-v2: add comments about reason why we can have cpu=0 there.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D5240A9.4080703@kernel.org>
[ Cleaned up and made the BIOS bug printouts more consistent ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e5fea868
  47. 10 2月, 2011 1 次提交
    • J
      x86: Fix section mismatch in LAPIC initialization · 2fb270f3
      由 Jan Beulich 提交于 
      Additionally doing things conditionally upon smp_processor_id()
being zero is generally a bad idea, as this means CPU 0 cannot
be offlined and brought back online later again.

While there may be other places where this is done, I think adding
more of those should be avoided so that some day SMP can really
become "symmetrical".
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <4D525C7E0200007800030EE1@vpn.id2.novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2fb270f3
  49. 29 1月, 2011 1 次提交
    • T
      x86: Fix build failure on X86_UP_APIC · 4e62445b
      由 Tejun Heo 提交于 
      Commit 4c321ff8 (x86: Replace cpu_2_logical_apicid[] with early
percpu variable) and following changes introduced and used
x86_cpu_to_logical_apicid percpu variable.  It was declared and
defined inside CONFIG_SMP && CONFIG_X86_32 but if
CONFIG_X86_UP_APIC is set UP configuration makes use of it and
build fails.

Fix it by declaring and defining it inside CONFIG_X86_LOCAL_APIC
&& CONFIG_X86_32.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <20110128162248.GA25746@htj.dyndns.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      4e62445b
  51. 28 1月, 2011 5 次提交
    • T
      x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit · bbc9e2f4
      由 Tejun Heo 提交于 
      The mapping between cpu/apicid and node is done via
apicid_to_node[] on 64bit and apicid_2_node[] +
apic->x86_32_numa_cpu_node() on 32bit. This difference makes it
difficult to further unify 32 and 64bit NUMA handling.

This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed
by two accessors - set_apicid_to_node() and numa_cpu_node().  On
64bit, numa_cpu_node() always consults __apicid_to_node[]
directly while 32bit goes through apic->numa_cpu_node() method
to allow apic implementations to override it.

srat_detect_node() for amd cpus contains workaround for broken
NUMA configuration which assumes relationship between APIC ID,
HT node ID and NUMA topology.  Leave it to access
__apicid_to_node[] directly as mapping through CPU might result
in undesirable behavior change.  The comment is reformatted and
updated to note the ugliness.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
      bbc9e2f4
    • T
      x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node() · 89e5dc21
      由 Tejun Heo 提交于 
      apic->apicid_to_node() is 32bit specific apic operation which
determines NUMA node for a CPU.  Depending on the APIC
implementation, it can be easier to determine NUMA node from
either physical or logical apicid.  Currently,
->apicid_to_node() takes @logical_apicid and calls
hard_smp_processor_id() if the physical apicid is needed.

This prevents NUMA mapping from being queried from a different
CPU, which in turn makes it impossible to initialize NUMA
mapping before SMP bringup.

This patch replaces apic->apicid_to_node() with
->x86_32_numa_cpu_node() which takes @cpu, from which both
logical and physical apicids can easily be determined.  While at
it, drop duplicate implementations from bigsmp_32 and summit_32,
and use the default one.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-13-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      89e5dc21
    • T
      x86: Add apic->x86_32_early_logical_apicid() · acb8bc09
      由 Tejun Heo 提交于 
      On x86_32, the mapping between cpu and logical apic ID differs
depending on the specific apic implementation in use.  The
mapping is initialized while bringing up CPUs; however, this
makes early inits ignore memory topology.

Add a x86_32 specific apic->x86_32_early_logical_apicid() which
is called early during boot to query the mapping.  The mapping
is later verified against the result of init_apic_ldr().  The
method is allowed to return BAD_APICID if it can't be determined
early.

noop variant which always returns BAD_APICID is implemented and
added to all x86_32 apic implementations.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-8-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      acb8bc09
    • T
      x86: Always use x86_cpu_to_logical_apicid for cpu -> logical apic id · 6f802c4b
      由 Tejun Heo 提交于 
      Currently, cpu -> logical apic id translation is done by
apic->cpu_to_logical_apicid() callback which may or may not use
x86_cpu_to_logical_apicid.  This is unnecessary as it should
always equal logical_smp_processor_id() which is known early
during CPU bring up.

Initialize x86_cpu_to_logical_apicid after apic->init_apic_ldr()
in setup_local_APIC() and always use x86_cpu_to_logical_apicid
for cpu -> logical apic id mapping.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-6-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6f802c4b
    • T
      x86: Replace cpu_2_logical_apicid[] with early percpu variable · 4c321ff8
      由 Tejun Heo 提交于 
      Unlike x86_64, on x86_32, the mapping from cpu to logical apicid
may vary depending on apic in use.  cpu_2_logical_apicid[] array
is used for this mapping.  Replace it with early percpu variable
x86_cpu_to_logical_apicid to make it better aligned with other
mappings.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-5-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      4c321ff8
  53. 10 1月, 2011 1 次提交
    • P
      x86, lapic-timer: Increase the max_delta to 31 bits · 4aed89d6
      由 Pierre Tardy 提交于 
      Latest atom socs(penwell) does not have hpet timer.

As their local APIC timer is clocked at 400KHZ, and the current
code limit their Initial Counter register to 23 bits, they
cannot sleep more than 1.34 seconds which leads to ~2 spurious
wakeup per second (1 per thread)

These SOCs support 32bit timer so we change the max_delta to at
least 31bits. So we can at least sleep for 300 seconds.

We could not find any previous chip errata where lapic would
only have 23 bit precision As powertop is suggesting to activate
HPET to "sleep longer", this could mean this problem is already
known.

Problem is here since very first implementation of lapic timer
as a clock event e9e2cdb4 [PATCH] clockevents: i386 drivers.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPierre Tardy <pierre.tardy@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
LKML-Reference: <1294327409-19426-1-git-send-email-pierre.tardy@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      4aed89d6
  55. 07 1月, 2011 1 次提交
  57. 30 12月, 2010 1 次提交
  59. 24 12月, 2010 1 次提交
  61. 14 12月, 2010 1 次提交