提交 · 7369ca8745499d001663e1dccf15064a3eb34b4d · openeuler / raspberrypi-kernel

06 4月, 2016 40 次提交

i40e: Make VF resets more reliable · 7369ca87

由 Mitch Williams 提交于 3月 18, 2016

Clear the VFLR bit immediately after triggering a reset instead of
waiting until after cleanup is complete. Make sure to trigger a reset
every time, not just if the PF is up.

These changes fix a problem where VF resets would get lost by the PF,
preventing the VF driver from initializing.

Change-ID: I5945cf2884095b7b0554867c64df8617e71d9d29
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

7369ca87

i40e: Add new device ID for X722 · d6bf58c2

由 Catherine Sullivan 提交于 3月 18, 2016

The new device ID is 0x37D3 and it should follow the same flows and
branding string as for 0x37D0.

Change-ID: Ia5ad4a1910268c4666a3fd46a7afffbec55b4fc2
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

d6bf58c2

i40evf: Fix VLAN features · c4445aed

由 Mitch Williams 提交于 3月 18, 2016

Users of ethtool were being given the mistaken impression that this
driver was able to change its VLAN tagging features, and were
disappointed that this was not actually the case. Implement
ndo_fix_features method so that we can adjust these flags as needed to
avoid false impressions.

Change-ID: I08584f103a4fa73d6a4128d472e4ef44dcfda57f
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

c4445aed

i40e: Remove unused variable · 442b25e4

由 Mitch Williams 提交于 3月 18, 2016

This variable is vestigial, a remnant of the primordial code from which
this driver spawned. We can safely remove it.

Change-ID: I24e0fe338e7c7c50d27dc5515564f33caefbb93a
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

442b25e4

i40e: Enable Geneve offload for FW API ver > 1.4 for XL710/X710 devices · 3845ccea

由 Anjali Singhai Jain 提交于 3月 18, 2016

This patch enables the Capability for XL710/X710 devices with FW API
version higher than 1.4 to do geneve Rx offload.

Change-ID: I9a8f87772c48d7d67dc85e3701d2e0b845034c0b
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

3845ccea

i40e: remove redundant check on vsi->active_vlans · afb8ece4

由 Colin King 提交于 2月 13, 2016

active_vlans is an unsigned long array, hence a null check on this
array is superfluous and can be removed.

Detected with static analysis by smatch:

drivers/net/ethernet/intel/i40e/i40e_debugfs.c:386
  i40e_dbg_dump_vsi_seid() warn: this array is probably
  non-NULL. 'vsi->active_vlans'
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

afb8ece4

net/core/dev: Warn on a too-short GRO frame · 4da46ceb

由 Aaron Conole 提交于 4月 02, 2016

When signaling that a GRO frame is ready to be processed, the network stack
correctly checks length and aborts processing when a frame is less than 14
bytes. However, such a condition is really indicative of a broken driver,
and should be loudly signaled, rather than silently dropped as the case is
today.

Convert the condition to use net_warn_ratelimited() to ensure the stack
loudly complains about such broken drivers.
Signed-off-by: NAaron Conole <aconole@bytheb.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

4da46ceb

ibmvnic: enable RX checksum offload · 9be02cdf

由 Thomas Falcon 提交于 4月 01, 2016

Enable RX Checksum offload feature in the ibmvnic driver.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

9be02cdf

ibmvnic: map L2/L3/L4 header descriptors to firmware · ad7775dc

由 Thomas Falcon 提交于 4月 01, 2016

Allow the VNIC driver to provide descriptors containing
L2/L3/L4 headers to firmware.  This feature is needed
for greater hardware compatibility and enablement of checksum
and TCP offloading features.

A new function is included for the hypervisor call,
H_SEND_SUBCRQ_INDIRECT, allowing a DMA-mapped array of SCRQ
descriptor elements to be sent to the VNIC server.

These additions will help fully enable checksum offloading as
well as other features as they are included later.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ad7775dc

Merge branch 'bcmgenet-cleanups' · 590ddaa4

由 David S. Miller 提交于 4月 05, 2016

Petri Gynther says:

====================
bcmgenet cleanups

Three cleanup patches for bcmgenet.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

590ddaa4

net: bcmgenet: cleanup for dmadesc_set() · 7ee40625

由 Petri Gynther 提交于 4月 05, 2016

dmadesc_set() is used for setting the Tx buffer DMA address, length,
and status bits on a Tx ring descriptor when a frame is being Tx'ed.

Always set the Tx buffer DMA address first, before updating the length
and status bits, i.e. giving the Tx descriptor to the hardware.

The reason this is a cleanup rather than a fix is that the hardware
won't transmit anything from a Tx ring until the TDMA producer index
has been incremented. As long as the dmadesc_set() writes complete
before the TDMA producer index write, life is good.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

7ee40625

net: bcmgenet: cleanup for bcmgenet_xmit_frag() · 824ba603

由 Petri Gynther 提交于 4月 05, 2016

Add frag_size = skb_frag_size(frag) and use it when needed.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

824ba603

net: bcmgenet: cleanup for bcmgenet_xmit() · f5a9ec20

由 Petri Gynther 提交于 4月 05, 2016

1. Readability: Move nr_frags assignment a few lines down in order
   to bundle index -> ring -> txq calculations together.
2. Readability: Add parentheses around nr_frags + 1.
3. Minor fix: Stop the Tx queue and throw the error message only if
   the Tx queue hasn't already been stopped.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

f5a9ec20

Merge branch 'udp-peek' · 66f87790

由 David S. Miller 提交于 4月 05, 2016

Willem de Bruijn says:

====================
udp: support SO_PEEK_OFF

Support peeking at a non-zero offset for UDP sockets. Match the
existing behavior on Unix datagram sockets.

1/3 makes the sk_peek_offset functions safe to use outside locks
2/3 removes udp headers before enqueue, to simplify offset arithmetic
3/3 introduces SO_PEEK_OFFSET support, with Unix socket peek semantics.

Changes
  v1->v2
    - squash patches 3 and 4
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

66f87790

udp: enable MSG_PEEK at non-zero offset · 627d2d6b

由 samanthakumar 提交于 4月 05, 2016

Enable peeking at UDP datagrams at the offset specified with socket
option SOL_SOCKET/SO_PEEK_OFF. Peek at any datagram in the queue, up
to the end of the given datagram.

Implement the SO_PEEK_OFF semantics introduced in commit ef64a54f
("sock: Introduce the SO_PEEK_OFF sock option"). Increase the offset
on peek, decrease it on regular reads.

When peeking, always checksum the packet immediately, to avoid
recomputation on subsequent peeks and final read.

The socket lock is not held for the duration of udp_recvmsg, so
peek and read operations can run concurrently. Only the last store
to sk_peek_off is preserved.
Signed-off-by: NSam Kumar <samanthakumar@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

627d2d6b

udp: remove headers from UDP packets before queueing · e6afc8ac

由 samanthakumar 提交于 4月 05, 2016

Remove UDP transport headers before queueing packets for reception.
This change simplifies a follow-up patch to add MSG_PEEK support.
Signed-off-by: NSam Kumar <samanthakumar@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e6afc8ac

sock: convert sk_peek_offset functions to WRITE_ONCE · b9bb53f3

由 Willem de Bruijn 提交于 4月 05, 2016

Make the peek offset interface safe to use in lockless environments.
Use READ_ONCE and WRITE_ONCE to avoid race conditions between testing
and updating the peek offset.
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

b9bb53f3

Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · e43d15c8

由 David S. Miller 提交于 4月 05, 2016

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-04-05

This series contains updates to i40e and i40evf only.

Stefan converts dev_close() to ndo_stop() for ethtool offline self test,
since dev_close() causes IFF_UP to be cleared which will remove the
interface routes and addresses.

Alex bumps up the size of the transmit data buffer to 12K rather than 8K,
which provides a gain in throughput and a reduction in overhead for
putting together the frame.  Fixed an issue in the polling routines where
we were using bitwise operators to avoid the side effects of the
logical operators.  Then added support for bulk transmit clean for skbs.

Jesse fixed a sparse issue in the type casting in the transmit code and
fixed i40e_aq_set_phy_debug() to use i40e_status as a return code.

Catherine cleans up duplicated code.

Shannon fixed the cleaning up of the interrupt handling to clean up the
IRQs only if we actually got them set up.  Also fixed up the error
scenarios where we were trying to remove a non-existent timer or
worktask, which causes the kernel heartburn.

Mitch changes the notification of resets to the reset interrupt handler,
instead of the actual reset initiation code.  This allows the VFs to get
properly notified for all resets, including resets initiated by different
PFs on the same physical device.  Also moved the clearing of VFLR bit
after reset processing, instead of before which could lead to double
resets on VF init.  Fixed code comment to match the actual function name.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e43d15c8

Merge branch 'bnxt_en-next' · f1cc8094

由 David S. Miller 提交于 4月 05, 2016

Michael Chan says:

====================
bnxt_en: Updates for net-next.

Update to latest firmware interface, add EEE feature, unsupported SFP+
module warning, and ethtool -s improvements.

v2: Removed the GEEPROM patch and added more comments to the get_eee patch.
====================

f1cc8094

bnxt_en: Improve ethtool .get_settings(). · 29c262fe