- 27 9月, 2015 3 次提交
-
-
由 Hans de Goede 提交于
The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Hans de Goede 提交于
The Auxtek-T003 HDMI stick is an A10s based HDMI stick with USB wifi, and composite video out support. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Hans de Goede 提交于
The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. This commit adds a dts for v4 of the gt90h pcb. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 13 9月, 2015 1 次提交
-
-
由 Josh Boyer 提交于
Commit 79ae3e66 (ARM: dts: sun4i: Add Iteaduino Plus A10) added a new make target for the sun4i-a10-itead-iteaduino-plus dts file, but mistakenly used .dts instead of the correct .dtb suffix. This resulted in a build error like: scripts/Makefile.dtbinst:42: target 'sun4i-a10-itead-iteaduino-plus.dts' doesn't match the target pattern when doing a make dtbs_install. Fix it to use the proper file name. Signed-off-by: NJosh Boyer <jwboyer@fedoraproject.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 15 8月, 2015 1 次提交
-
-
由 Eduardo Valentin 提交于
This change is a code reorganization. Here we introduce serial_imx_enable_wakeup() helper function to do the job of configuring and preparing wakeup sources on imx serial device. The idea is to allow other parts of the code to call this function whenever the device is known to go to idle. Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NEduardo Valentin <edubezval@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 8月, 2015 3 次提交
-
-
由 Frank Li 提交于
Add new SOC i.MX6UL dtb file support, including evk board support i.MX6 Ultralite processor include one ARM cortext-A7 core. Offer high perfomance and lowest power consumption. Main included: - 4 MMC/SD/SDIO - 2 USB 2.0 OTG - 3 I2S/SAI/AC97 - 4 eCSPI - 4 I2C - 2 ENET - 2 CAN - 3 wdog - ASRC - 8 uart - LCDIF - PXP Signed-off-by: NAnson Huang <b20788@freescale.com> Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NFancy Fang <chen.fang@freescale.com> Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Masahiro Yamada 提交于
Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for PH1-LD6b reference board. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> [olof: sort Makefile entries] Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Turns out I fumbled a couple of the merge resolutions for marzen board removal. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 08 8月, 2015 1 次提交
-
-
由 Alexandru M Stan 提交于
Also known as the Asus Chromebook Flip. Signed-off-by: NAlexandru M Stan <amstan@chromium.org> Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NDouglas Anderson <dianders@chromium.org>
-
- 07 8月, 2015 1 次提交
-
-
由 Benjamin Cama 提交于
The title says it all. The name of the dts file as been changed to better reflect the manufacturer's device name (LS-WSGL), rather than the original "lsmini", which exists in a kirkwood version too. [gregory.clement@free-electrons.com]: use tab instead of space to indent dts at line 185. Reslove merge conflict with patch "ARM: dts: orion5x: add buffalo linkstation ls-wtgl" in the file arch/arm/boot/dts/Makefile. Signed-off-by: NBenjamin Cama <benoar@dolka.fr> Acked-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NAlexey Kopytko <alexey@kopytko.ru> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
- 06 8月, 2015 1 次提交
-
-
由 Anthoine Bourgeois 提交于
Devkit8000 was sold with a 4.3" LCD or 7.0" or without. This patch creates one dts file per bundle. Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 31 7月, 2015 1 次提交
-
-
由 Nicolas Ferre 提交于
Add minimal support for the new sama5d2 Xplained board. Only USB, spi/i2c, ethernet and uart/usart peripherals added. With this DTS file you can boot the board and begin to play with it. Rootfs on NFS and sd card have successfully been tested. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 30 7月, 2015 1 次提交
-
-
由 Sergei Shtylyov 提交于
Add the initial device tree for the R8A7794 SoC based SILK low cost board. SCIF2 serial port support is included, so that the serial console can work. Based on the original patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 28 7月, 2015 1 次提交
-
-
由 Magnus Damm 提交于
Remove Marzen legacy board code written in C. Instead board support expressed in DT shall be used together with Multiplatform and shmobile_defconfig. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 25 7月, 2015 1 次提交
-
-
由 Roger Shimizu 提交于
Add dts file to support Buffalo Linkstation LS-WTGL, which is marvell orion5x based 2-bay 3.5" HDD NAS. Product info: - (JPN) http://buffalo.jp/products/catalog/storage/ls-wtgl_r1/ - (ENG) http://www.buffalotech.com/support-and-downloads/download/LinkStation_Pro_Duo_Manual_web.pdfSigned-off-by: NRoger Shimizu <rogershimizu@gmail.com> Acked-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
- 24 7月, 2015 3 次提交
-
-
由 Tony Lindgren 提交于
Add minimal support for HP T410. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Add minimal dts support for dm8148-evm. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Romain Perier 提交于
Which is formally known as the Asus C201 chromebook Signed-off-by: NRomain Perier <romain.perier@gmail.com> Reviewed-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 23 7月, 2015 1 次提交
-
-
由 Maxime Coquelin 提交于
Main features of STM32429i-EVAL evaluation kit are: - STM32F429 Cortex-M4 MCU @180MHz * 2MB internal Flash * 256KB internal RAM - 32MB SDRAM - 16MB NOR Flash - 2MB SRAM - 4.3" TFT LCD with resistive touchscreen - SDCard connector (SDIO compatible) - 1x USB 2.0 OTG + 1x USB 1.1 OTG - Ethernet Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com>
-
- 22 7月, 2015 1 次提交
-
-
由 Dalon Westergreen 提交于
The Terasic DE0 Atlas board is also known as the DE0-Nano board. This patch adds the DTS board file for the DE0-Nano Sockit board, and not the DE0 Nano "Development Board". Signed-off-by: NDalon Westergreen <dwesterg@gmail.com> Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com> --- v3: Updated skew settings for the gmac1 node as this board is using the KSZ9031 PHY instead of the 9021 PHY. v2: use stdpath-out for console and remove comment regarding u-boot ethaddr
-
- 21 7月, 2015 2 次提交
-
-
由 Josef Gajdusek 提交于
Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM, has most of the A10 pins on a .1" header, 2 USB ports, 1 OTG USB port, Ethernet, HDMI, SATA, Speaker/Microphone 3.5mm jacks and an SD card slot. Signed-off-by: NJosef Gajdusek <atx@atx.name> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Teresa Remmet 提交于
phyBOARD-WEGA-AM335x represents a direct soldered combination of a phyCORE-AM335x SoM and carrier board. Different kind of SoM options can be connected to the wega carrier board. So we created a separate wega dtsi file. The final dts contains the actual SoM on the carrier board. WEGA carrier board features: * ETH phy on carrier board: 1x MII * 1x CAN * 2x UART * USB0 (device) * USB1 (host) * mSD slot Signed-off-by: NTeresa Remmet <t.remmet@phytec.de> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 18 7月, 2015 1 次提交
-
-
由 Mars Cheng 提交于
This adds basic chip support for Mediatek 6580. Signed-off-by: NMars Cheng <mars.cheng@mediatek.com> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
- 16 7月, 2015 2 次提交
-
-
由 Heiko Stuebner 提交于
While pinky was one of the earlier development models, is on the list of endangered species today and nearly extinct, I want to keep mine around for the foreseeable future after spending all the time making a nice hole into the base below the dut-connector. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Alexandru M Stan 提交于
The Hisense Chromebook C11, also named jerry. Signed-off-by: NAlexandru M Stan <amstan@chromium.org> Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NDoug Anderson <dianders@chromium.org>
-
- 15 7月, 2015 1 次提交
-
-
由 Heiko Stuebner 提交于
This board is used in some TV-boxes like for example the Beelink R89 or Tronsmart R28. The board itself follows the reference design for the most part. But there are no schematics available it seems, so some things should be taken with a grain of salt. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NRomain Perier <romain.perier@gmail.com>
-
- 14 7月, 2015 3 次提交
-
-
由 Ezequiel Garcia 提交于
Add basic support for CIAA (Argentine Open Industrial Computer) LPC4337 board. This commit enables the following peripherals: * UART * SSP * Ethernet Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Adam YH Lee 提交于
Also, reduce the maximum SPI device speed to the max. supported by the LCD controller used on the LGPhilips LB035Q02 panel for this board. Signed-off-by: NAsh Charles <ashcharles@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Ash Charles 提交于
The Gumstix "Tobi-Duo" expansion board [1] can be used with either OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221 chips. It is necessary to duplicate the interface information for the second SMSC9221 chip as discussed [2]. [1] https://store.gumstix.com/index.php/products/241/ [2] http://www.spinics.net/lists/linux-omap/msg115282.htmlSigned-off-by: NAsh Charles <ashcharles@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 7月, 2015 2 次提交
-
-
由 Roger Shimizu 提交于
Add dts file to support Buffalo Linkstation LS-WVL and LS-VL, which are 3.5" HDD NAS in 2-bay and 1-bay respectively. [gregory.clement@free-electrons.com: fix typo in pmx-led-function-red] Signed-off-by: NRoger Shimizu <rogershimizu@gmail.com> Reviewed-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Roger Shimizu 提交于
Add dts file to support Buffalo Linkstation LS-WXL and LS-WSXL, which are 2-bay NAS with 3.5" and 2.5" HDD respectively. Signed-off-by: NRoger Shimizu <rogershimizu@gmail.com> Reviewed-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
- 06 7月, 2015 4 次提交
-
-
由 Hans de Goede 提交于
The Ippo-q8h is a tablet circuit board commonly found in cheap Android tablets. The v1.2 version can be used with either an A23 or A33 SoC. This version features 512 MB DRAM, 4G NAND, MMC, LCD, capacitive touchscreen, accelerometer, 2 camera sensors, USB OTG, microphone and speakers. i2c0 is connected to the gsl1680 capacitive touch panel controller, i2c1 is connected to an mma7660 3-axis accelerometer, these peripherals are not supported by the kernel yet, i2c bus functionality has been tested via i2c-dev. Signed-off-by: NHans de Goede <hdegoede@redhat.com> [maxime: Removed the resolution mention, and modified the compatible to have a unique one with the A23 version] Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Ulrich Hecht 提交于
Minimal DT description and Makefile entry for the Gose eval board. Support for console, timer, and Ethernet. Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
The legacy board code for Armadillo-800 EVA has been removed. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
The legacy board code for KZM-A9-GT has been removed. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 12 6月, 2015 1 次提交
-
-
由 Jun Nie 提交于
Add initial dts file and document for ZX296702 and board ZX296702-AD1. More peripherals will be added later. Signed-off-by: NJun Nie <jun.nie@linaro.org> Signed-off-by: NKevin Hilman <khilman@linaro.org>
-
- 11 6月, 2015 1 次提交
-
-
由 Maxime Coquelin 提交于
The STMicrolectornics's STM32F429 MCU has the following main features: - Cortex-M4 core running up to @180MHz - 2MB internal flash, 256KBytes internal RAM - FMC controller to connect SDRAM, NOR and NAND memories - SD/MMC/SDIO support - Ethernet controller - USB OTFG FS & HS controllers - I2C, SPI, CAN busses support - Several 16 & 32 bits general purpose timers - Serial Audio interface - LCD controller Tested-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: NKevin Hilman <khilman@linaro.org>
-
- 07 6月, 2015 1 次提交
-
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
- 04 6月, 2015 1 次提交
-
-
由 Alexandre Belloni 提交于
Add a minimum Device Tree for Acme Arietta G25. http://acme.systems/ariettaSigned-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NSergio Tanzilli <tanzilli@acmesystems.it> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 03 6月, 2015 1 次提交
-
-
由 Heiko Schocher 提交于
This patch adds support for the imx6dl based aristainetos2 board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz MReset cause: POR MBoard: aristaitenos2 DRAM: 1 GiB NAND: 1024 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lb07wv8 (800x480) As this board can be used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-