Previously, both usbhid and usbtouchscreen would bind to D-WAV devices
with class HID and protocol None, so they would be claimed by whichever
driver was loaded first.  Some of these devices do in fact work with
usbhid, but not all of them do.  OTOH they all work with usbtouchscreen
as of commit 037a833e ("Input:
usbtouchscreen - initialize eGalax devices").  So we ignore them in
usbhid to prevent getting in the way of usbtouchscreen and claiming an
interface that we may not be able to do anything useful with.
Signed-off-by: NForest Bond <forest.bond@rapidrollout.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Set APPLE_ISO_KEYBOARD flag on USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO so we get
the ISO translation on German keyboards for the MacBook4,1 as well.
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Button names for USB gamepads are currently assigned incorrectly, as the evdev
code assigned to buttons is "BTN_GAMEPAD + code", which on devices with more
then 16 buttons bleeds over into button names reserved for graphic tablets
(BTN_TOOL_PEN, etc.). This causes problems further down the line as the device
are now no longer detected as joystick. This patch fixes that by assigning
buttons outside the range to BTN_TRIGGER_HAPPY (as is already the case for USB
joysticks).

Furthermore this patch corrects the assignment to BTN_TRIGGER_HAPPY, as
currently the first button over 16 is assigned to BTN_TRIGGER_HAPPY17 (i.e.
BTN_TRIGGER_HAPPY+0x10) not BTN_TRIGGER_HAPPY.
Signed-off-by: NIngo Ruhnke <grumbel@gmail.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Remove spurious brackets in Kconfig for hid-icade.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a
key press and release for each joystick movement or button press or release.
For example, moving the stick to the left will generate the "A" key being
pressed and then released.

A list of all the combinations is available in the iCade developer guide [2].

This driver hides all this and makes the device work as a generic joystick.

[1]: http://www.ionaudio.com/products/details/icade
[2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdfSigned-off-by: NBastien Nocera <hadess@hadess.net>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When a device is unplugged, wait for all processes that have opened the device
to close before deallocating the device.
Signed-off-by: NRatan Nalumasu <ratan@google.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when
there is an active listener on debugfs for events.

His change got lost while splitting hid_picolcd.c, restore it.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and
modify the driver for new GeneralTouch PWT touchscreen.
Signed-off-by: NXianhan Yu <aroundight77@gmail.com>
Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Sony PS3 Blue-ray Disc Remote Control used to be supported by the
BlueZ project's user space, but the code that handled it was recently
removed as its functionality conflicted with a real HSP implementation
and the mapping was thought to be better handled in the kernel. This is
a port of the mapping logic from the fakehid driver by Marcel Holtmann
to the in-kernel HID layer.

We also add support for the Logitech Harmony Adapter for PS3, which
emulates the BD Remote.
Signed-off-by: NDavid Dillow <dave@thedillows.org>
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The dev_rdesc member of the hid_device structure is meant to store the original
report descriptor received from the device, but it is currently passed to any
report_fixup method before it is copied to the rdesc member. This patch uses a
temporary buffer to shield dev_rdesc from the side effects of many HID drivers'
report_fixup implementations.

usbhid's hid_post_reset checks the report descriptor currently returned by the
device against a descriptor that may have been modified by a driver's
report_fixup method. That leaves some devices nonfunctional after a resume, with
a "reset_resume error 1" reported. This patch checks the new descriptor against
the unmodified dev_rdesc instead and uses the original, instead of modified,
report size.

BugLink: http://bugs.launchpad.net/bugs/1049623Signed-off-by: NKevin Daughtridge <kevin@kdau.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fixes a couple of minor coding style issues.
Signed-off-by: NMichal Malý <madcatxster@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The lg4ff driver doesn't fill the "input_absinfo" struct so it is left
with default values. Applications with rely on information in this struct
therefore do not work correctly with the wheel.

Other Logitech wheels probably need this fix too, but again I do not have
enough information to write it.
Signed-off-by: NMichal Malý <madcatxster@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Range limiting command for the Driving Force Pro wheel is only a FF_SPRING
effect so that the wheel creates resistance when the user tries to turn it past
the limit. It is however possible to overpower the FFB motors quite easily which
leads to the X axis value exceeding the expected limit. This confuses
games which dynamically adjust calibration using the highest/lowest min and max
values reported by the wheel. Joydev device driver also doesn't take in account
any changes in an axis range after the joystick device is created.

This patch recalculates received ABS_X axis value so it is always in
<0; 16383> range where 0 is the left limit and 16383 the right limit.
Logitech driver for Windows does the same thing.  As for any concerns about
possible loss of precision, I compared a large set of raw/adjusted values
generated by "mult_frac" to values returned by the Windows driver and I got
a 100% match.

Other Logitech wheels will probably need a similar fix, but I currently lack
the information needed to write one.
Signed-off-by: NMichal Malý <madcatxster@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch replaces all occurrences of "report->field[0]->value[n]" with just
"value[n]" to get rid of the lengthy trains we have now.
Signed-off-by: NMichal Malý <madcatxster@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since something will be divided by these variables in
show_min_width()/show_min_height() and show_activate_width()/
show_activate_height(), a divided error would be triggered if
they are zero.
Signed-off-by: NWen-chien Jesse Sung <jesse.sung@canonical.com>
Acked-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Make sure we keep enough space for terminating NUL character after last
newline. If we have too much data, replace last byte with '.'s to
make overflow visible.

Using hex_dump_to_buffer() is not interesting as it adds more overhead
and does not append the trailing linefeed.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix below issues:
1. In the case of goto err_close, hid_hw_stop(hdev) is called twice. Fix it.
2. If fails to allocate MFD device name, we also need to free all
   successfully allocated names in previous iterations.
3. In sensor_hub_remove(), Call hid_hw_close() before hid_hw_stop().
4. Adjust unnecessary change lines for hid_err.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Current implementation of hid_hw_start() allows connect_mask to be 0.
Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start()
is not necessary. Remove it.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch fixes an issue introduced after commit 4ea54542
("HID: Fix race condition between driver core and ll-driver").

After that commit, hid-core discards any incoming packet that arrives while
hid driver's probe function is being executed.

This broke the enumeration process of hid-logitech-dj, that must receive
control packets in-band with the mouse and keyboard packets. Discarding mouse
or keyboard data at the very begining is usually fine, but it is not the case
for control packets.

This patch forces a re-enumeration of the paired devices when a packet arrives
that comes from an unknown device.

Based on a patch originally written by Benjamin Tissoires.

Cc: stable@vger.kernel.org   # v3.2+
Signed-off-by: NNestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We need to kfree names for led_mute and led_micmute in tpkbd_remove_tp().
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NBernhard Seibold <mail@bernhard-seibold.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for the Flatfrog Multitouch 3200 panel. This panel
advertises some fields that it does not use, hence the new quirk.

Cc: Pablo Cases <pablo.cases@flatfrog.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Some devices report the number of contacts via the unreliable
CONTACTCOUNT usage, rather than using the CONTACTMAX feature.
Without this patch, the 3M devices are constrained to the default
maximum of ten fingers.

Cc: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

With the input_mt_sync_frame() function in place, there is no longer
any need to keep the full touch state in the driver. This patch
removes the slot state and replaces the lookup code with the input-mt
equivalent.
Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

With the input_configured() callback in place, the setup and frame
synchronization can be simplified. The input device initialization is
moved to mt_input_configured(), to make sure the full HID report has been
seen.
Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

A hid device may create several input devices, and a driver may need
to prepare or finalize the configuration per input device. Currently,
there is no sane way for a driver to know when a device has been
configured. This patch adds a callback providing that information.
Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Tested-by: NPing Cheng <pingc@wacom.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Preparing to move more repeated code into the mt core, add a flags
argument to the input_mt_slots_init() function.
Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Tested-by: NPing Cheng <pingc@wacom.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Current implementation of hid_hw_start() allows connect_mask to be 0.
Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start() is not
necessary. Remove it.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-By: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 4ea54542
[HID: Fix race condition between driver core and ll-driver] introduced
new locking around probe/remove functions that prevents any report/reply
from hardware to reach driver until it returned from probe.

As such, the ask-reply way to checking picoLCD firmware version during
probe is bound to timeout and let probe fail.

Drop the check to let driver successfully probe again (until locking issues
are resolved allowing to reinstate the check).
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

OLEDs/LED are not critical for tablet functioning thus ignore OLED/LED
initialisation failures.

This patch does clean up all the sysfs attribute files in error paths.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Tested-by: NPrzemo Firszt <przemo@firszt.eu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

"report_id" is unsigned so it's never less than zero.  These checks can
be removed without any problem.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We're holding a spinlock here so we can't call kmalloc() with
GFP_KERNEL.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Roccat devices are standard compatible, specific drivers are only needed
for extended functionality.
If Roccat drivers are not configured, hid-generic binds these devices now.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The raw pressure-data that is reported by balance-boards is pretty useless
unless calibration data is applied. Therefore, we read the full
calibration data on extension initialization and apply it to every
reported data.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Nintendo Balance-Board is a controller which behaves exactly like the
Wii Remote but reports all its data through a special extension device.
Hence, we can simply add the Balance-Board as extension device and we get
full support for it.
Tested-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Return -ENOMEM instead of -1 if memory allocation fails.
Return -EINVAL instead of -1 for stack overflow and
underflow errors.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

container_of() never returns NULL, thus also remove the NULL checking for it.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>