Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 31 1月, 2011 8 次提交
    • N
      md: don't clear curr_resync_completed at end of resync. · 7281f812
      由 NeilBrown 提交于 
      There is no need to set this to zero at this point.  It will be
set to zero by remove_and_add_spares or at the start of
md_do_sync at the latest.
And setting it to zero before MD_RECOVERY_RUNNING is cleared can
make a 'zero' appear briefly in the 'sync_completed' sysfs attribute
just as resync is finishing.

So simply remove this setting to zero.
Signed-off-by: NNeilBrown <neilb@suse.de>
      7281f812
    • N
      md: Don't use remove_and_add_spares to remove failed devices from a read-only array · a8c42c7f
      由 NeilBrown 提交于 
      remove_and_add_spares is called in two places where the needs really
are very different.
remove_and_add_spares should not be called on an array which is about
to be reshaped as some extra devices might have been manually added
and that would remove them.  However if the array is 'read-auto',
that will currently happen, which is bad.

So in the 'ro != 0' case don't call remove_and_add_spares but simply
remove the failed devices as the comment suggests is needed.
Signed-off-by: NNeilBrown <neilb@suse.de>
      a8c42c7f
    • K
      Add raid1->raid0 takeover support · fc3a08b8
      由 Krzysztof Wojcik 提交于 
      This patch introduces raid 1 to raid0 takeover operation
in kernel space.
Signed-off-by: NKrzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NNeil Brown <neilb@nbeee.brown>
      fc3a08b8
    • N
      md: Remove the AllReserved flag for component devices. · f21e9ff7
      由 NeilBrown 提交于 
      This flag is not needed and is used badly.

Devices that are included in a native-metadata array are reserved
exclusively for that array - and currently have AllReserved set.
They all are bd_claimed for the rdev and so cannot be shared.

Devices that are included in external-metadata arrays can be shared
among multiple arrays - providing there is no overlap.
These are bd_claimed for md in general - not for a particular rdev.

When changing the amount of a device that is used in an array we need
to check for overlap.  This currently includes a check on AllReserved
So even without overlap, sharing with an AllReserved device is not
allowed.
However the bd_claim usage already precludes sharing with these
devices, so the test on AllReserved is not needed.  And in fact it is
wrong.

As this is the only use of AllReserved, simply remove all usage and
definition of AllReserved.
Signed-off-by: NNeilBrown <neilb@suse.de>
      f21e9ff7
    • N
      md: don't abort checking spares as soon as one cannot be added. · 50da0840
      由 NeilBrown 提交于 
      As spares can be added manually before a reshape starts, we need to
find them all to mark some of them as in_sync.

Previously we would abort looking for spares when we found an
unallocated spare what could not be added to the array (implying there
was no room for new spares).  However already-added spares could be
later in the list, so we need to keep searching.
Signed-off-by: NNeilBrown <neilb@suse.de>
      50da0840
    • N
      md: fix the test for finding spares in raid5_start_reshape. · 469518a3
      由 NeilBrown 提交于 
      As spares can be added to the array before the reshape is started,
we need to find and count them when checking there are enough.
The array could have been degraded, so we need to check all devices,
no just those out side of the range of devices in the array before
the reshape.

So instead of checking the index, check the In_sync flag as that
reliably tells if the device is a spare or this purpose.
Signed-off-by: NNeilBrown <neilb@suse.de>
      469518a3
    • N
      md: simplify some 'if' conditionals in raid5_start_reshape. · 87a8dec9
      由 NeilBrown 提交于 
      There are two consecutive 'if' statements.

 if (mddev->delta_disks >= 0)
      ....
 if (mddev->delta_disks > 0)

The code in the second is equally valid if delta_disks == 0, and these
two statements are the only place that 'added_devices' is used.

So make them a single if statement, make added_devices a local
variable, and re-indent it all.

No functional change.
Signed-off-by: NNeilBrown <neilb@suse.de>
      87a8dec9
    • N
      md: revert change to raid_disks on failure. · de171cb9
      由 NeilBrown 提交于 
      If we try to update_raid_disks and it fails, we should put
'delta_disks' back to zero.  This is important because some code,
such as slot_store, assumes that delta_disks has been validated.
Signed-off-by: NNeilBrown <neilb@suse.de>
      de171cb9
  3. 28 1月, 2011 16 次提交
  5. 27 1月, 2011 11 次提交
  7. 26 1月, 2011 5 次提交