The transfer buffer of dev->interrupt is allocated in .probe path,
but not freed in .disconnet path, so mark the interrupt URB as
URB_FREE_BUFFER to free the buffer when the URB is destroyed.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Acked-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Creating a VLAN interface on top of ucc_geth adds 4 bytes
to the frame and the HW controller is not prepared to
TX a frame bigger than 1518 bytes which is 4 bytes too
small for a full VLAN frame. Add 16 bytes which will handle
the a simple VLAN and leaves 12 bytes for future expansion.
Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a busy network we see ucc_geth is dropping RX pkgs every now
and then. Increase the RX queues HW descriptors from
16 to 32 to deal with this.
Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

skb_checksum_help(skb) can return an error, we must free skb in this
case. qdisc_drop(skb, sch) can also be feeded with a NULL skb (if
skb_unshare() failed), so lets use this generic helper.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older
supported chips. Sometimes the VLAN bit is not set for valid VLAN packets
and also sometimes the VLAN bit is set for non-VLAN packets that came after
a VLAN packet. This results in a receive length error when VLAN hardware
tagging is enabled.

Fix: Variation on original fix proposed by Mirko.
The VLAN information is decoded in the status loop, and can be
applied to the received SKB there. This eliminates the need for the
separate tag field in the interface data structure. The tag has to
be copied and cleared if packet is copied. This version checked out
with vlan and normal traffic.

Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that
is outside scope of this.
Reported-by: NMirko Lindner <mlindner@marvell.com>
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a small packet is received, the driver copies it to a new skb to allow
reusing the full size Rx buffer. The copy was propogating the checksum offload
but not the receive hash information. The bug is impact was mostly harmless
and therefore not observed until reviewing this area of code.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix kernel doc typos in function names
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver calls cxgb_vlan_mode() from init_one().  This calls into
synchronize_rx(), which locks all the q locks, but the q locks are not
initialized until cxgb_up() -> setup_sge_qsets().  So move the call to
cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets().
We also move the body of these functions up higher to avoid having to
a forward declaration.

This was found because of the lockdep warning:

    INFO: trying to register non-static key.
    the code is fine but needs lockdep annotation.
    turning off the locking correctness validator.
    Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 #28
    Call Trace:
     [<ffffffff8106e767>] register_lock_class+0x108/0x2d0
     [<ffffffff8106ff42>] __lock_acquire+0xd3/0xd06
     [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe
     [<ffffffff813862a6>] _raw_spin_lock_irq+0x36/0x45
     [<ffffffffa01e71aa>] cxgb_vlan_mode+0x96/0xcb [cxgb3]
     [<ffffffffa01f90eb>] init_one+0x8c4/0x980 [cxgb3]
     [<ffffffff811fcbf0>] local_pci_probe+0x3f/0x70
     [<ffffffff81042206>] do_work_for_cpu+0x10/0x22
     [<ffffffff810482de>] kthread+0xa1/0xa9
     [<ffffffff8138e234>] kernel_thread_helper+0x4/0x10

Contrary to what lockdep says, the code is not fine: we are locking an
uninitialized spinlock.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the support to bounce buffer added, the skb is coming as nonlinear in the
case of non-DDPed data frames for FCoE, which is mostly ok as the FCoE stack
would take care of that. However, for target mode, we have to set the FC CRC
and FC EOF field to allow the protocol stack to not drop the frame for the last
data frame of that sequence. So fix this by linearizing the skb first before
doing skb_put().
Signed-off-by: NYi Zou <yi.zou@intel.com>
Tested-by: NMarcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The driver was freeing memory in shutdown instead of remove.  As a result
we were leaking memory if IEEE DCB was enabled and we loaded/unloaded the
driver.  This change moves the freeing of the memory into the remove
routine where it belongs.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NJohn Fastabend <john.r.fastabend@intel.com>
Tested-by: NRoss Brattain <ross.b.brattain@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Maybe it's a typo, but it cause that igbvf can't be initialized successfully.
Set perm_addr value using valid dev_addr, although which is equal to hw.mac.addr.
Signed-off-by: NSamuel Liao <samuelliao@tencent.com>
Signed-off-by: NShan Wei <davidshan@tencent.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch sets the automatic speed and duplex detection bits
in MAC_CR to enable the mac to determine its speed automatically
from the phy.

Note this must be done BEFORE the receiver or transmitter is
enabled.
Signed-off-by: NStephane Fillod <fillods@users.sf.net>
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

also explicitly set the phy to advertise 1000 speeds
Signed-off-by: NStephane Fillod <fillods@users.sf.net>
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smsc75xx phy interrupt acknowledge needs an mdio_write to clear
PHY_INT_SRC instead of just a read like in smsc95xx.
Signed-off-by: NStephane Fillod <fillods@users.sf.net>
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d9460920Signed-off-by: NStephane Fillod <fillods@users.sf.net>
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephane Fillod <fillods@users.sf.net>
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O.  Note smsc75xx is different from smsc95xx in this regard.
Signed-off-by: NStephane Fillod <fillods@users.sf.net>
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the same issue as reported on smsc95xx, where the
usb device is connected with no ethernet cable plugged-in.

Without this patch sysfs reports the cable as present

flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier
1

while it's not:

flag@flag-desktop:~$ sudo mii-tool eth0
eth0: no link
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

EAP frames for stations in an AP VLAN are sent on the main AP interface
to avoid race conditions wrt. moving stations.
For that to work properly, sta_info_get_bss must be used instead of
sta_info_get when sending EAP packets.
Previously this was only done for cooked monitor injected packets, so
this patch adds a check for tx->skb->protocol to the same place.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When the cwnd reduction is done, ssthresh may be infinite
if TCP enters CWR via ECN or F-RTO. If cwnd is not undone, i.e.,
undo_marker is set, tcp_complete_cwr() falsely set cwnd to the
infinite ssthresh value. The correct operation is to keep cwnd
intact because it has been updated in ECN or F-RTO.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now the helper function from filter.c for negative offsets is exported,
it can be used it in the jit to handle negative offsets.

First modify the asm load helper functions to handle:
- know positive offsets
- know negative offsets
- any offset

then the compiler can be modified to explicitly use these helper
when appropriate.

This fixes the case of a negative X register and allows to lift
the restriction that bpf programs with negative offsets can't
be jited.
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJan Seiffert <kaffeemonster@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Denys Fedoryshchenko reported frequent crashes on a proxy server and kindly
provided a lockdep report that explains it all :

  [  762.903868]
  [  762.903880] =================================
  [  762.903890] [ INFO: inconsistent lock state ]
  [  762.903903] 3.3.4-build-0061 #8 Not tainted
  [  762.904133] ---------------------------------
  [  762.904344] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
  [  762.904542] squid/1603 [HC0[0]:SC0[0]:HE1:SE1] takes:
  [  762.904542]  (key#3){+.?...}, at: [<c0232cc4>]
__percpu_counter_sum+0xd/0x58
  [  762.904542] {IN-SOFTIRQ-W} state was registered at:
  [  762.904542]   [<c0158b84>] __lock_acquire+0x284/0xc26
  [  762.904542]   [<c01598e8>] lock_acquire+0x71/0x85
  [  762.904542]   [<c0349765>] _raw_spin_lock+0x33/0x40
  [  762.904542]   [<c0232c93>] __percpu_counter_add+0x58/0x7c
  [  762.904542]   [<c02cfde1>] sk_clone_lock+0x1e5/0x200
  [  762.904542]   [<c0303ee4>] inet_csk_clone_lock+0xe/0x78
  [  762.904542]   [<c0315778>] tcp_create_openreq_child+0x1b/0x404
  [  762.904542]   [<c031339c>] tcp_v4_syn_recv_sock+0x32/0x1c1
  [  762.904542]   [<c031615a>] tcp_check_req+0x1fd/0x2d7
  [  762.904542]   [<c0313f77>] tcp_v4_do_rcv+0xab/0x194
  [  762.904542]   [<c03153bb>] tcp_v4_rcv+0x3b3/0x5cc
  [  762.904542]   [<c02fc0c4>] ip_local_deliver_finish+0x13a/0x1e9
  [  762.904542]   [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d
  [  762.904542]   [<c02fc652>] ip_local_deliver+0x41/0x45
  [  762.904542]   [<c02fc4d1>] ip_rcv_finish+0x31a/0x33c
  [  762.904542]   [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d
  [  762.904542]   [<c02fc857>] ip_rcv+0x201/0x23e
  [  762.904542]   [<c02daa3a>] __netif_receive_skb+0x319/0x368
  [  762.904542]   [<c02dac07>] netif_receive_skb+0x4e/0x7d
  [  762.904542]   [<c02dacf6>] napi_skb_finish+0x1e/0x34
  [  762.904542]   [<c02db122>] napi_gro_receive+0x20/0x24
  [  762.904542]   [<f85d1743>] e1000_receive_skb+0x3f/0x45 [e1000e]
  [  762.904542]   [<f85d3464>] e1000_clean_rx_irq+0x1f9/0x284 [e1000e]
  [  762.904542]   [<f85d3926>] e1000_clean+0x62/0x1f4 [e1000e]
  [  762.904542]   [<c02db228>] net_rx_action+0x90/0x160
  [  762.904542]   [<c012a445>] __do_softirq+0x7b/0x118
  [  762.904542] irq event stamp: 156915469
  [  762.904542] hardirqs last  enabled at (156915469): [<c019b4f4>]
__slab_alloc.clone.58.clone.63+0xc4/0x2de
  [  762.904542] hardirqs last disabled at (156915468): [<c019b452>]
__slab_alloc.clone.58.clone.63+0x22/0x2de
  [  762.904542] softirqs last  enabled at (156915466): [<c02ce677>]
lock_sock_nested+0x64/0x6c
  [  762.904542] softirqs last disabled at (156915464): [<c0349914>]
_raw_spin_lock_bh+0xe/0x45
  [  762.904542]
  [  762.904542] other info that might help us debug this:
  [  762.904542]  Possible unsafe locking scenario:
  [  762.904542]
  [  762.904542]        CPU0
  [  762.904542]        ----
  [  762.904542]   lock(key#3);
  [  762.904542]   <Interrupt>
  [  762.904542]     lock(key#3);
  [  762.904542]
  [  762.904542]  *** DEADLOCK ***
  [  762.904542]
  [  762.904542] 1 lock held by squid/1603:
  [  762.904542]  #0:  (sk_lock-AF_INET){+.+.+.}, at: [<c03055c0>]
lock_sock+0xa/0xc
  [  762.904542]
  [  762.904542] stack backtrace:
  [  762.904542] Pid: 1603, comm: squid Not tainted 3.3.4-build-0061 #8
  [  762.904542] Call Trace:
  [  762.904542]  [<c0347b73>] ? printk+0x18/0x1d
  [  762.904542]  [<c015873a>] valid_state+0x1f6/0x201
  [  762.904542]  [<c0158816>] mark_lock+0xd1/0x1bb
  [  762.904542]  [<c015876b>] ? mark_lock+0x26/0x1bb
  [  762.904542]  [<c015805d>] ? check_usage_forwards+0x77/0x77
  [  762.904542]  [<c0158bf8>] __lock_acquire+0x2f8/0xc26
  [  762.904542]  [<c0159b8e>] ? mark_held_locks+0x5d/0x7b
  [  762.904542]  [<c0159cf6>] ? trace_hardirqs_on+0xb/0xd
  [  762.904542]  [<c0158dd4>] ? __lock_acquire+0x4d4/0xc26
  [  762.904542]  [<c01598e8>] lock_acquire+0x71/0x85
  [  762.904542]  [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58
  [  762.904542]  [<c0349765>] _raw_spin_lock+0x33/0x40
  [  762.904542]  [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58
  [  762.904542]  [<c0232cc4>] __percpu_counter_sum+0xd/0x58
  [  762.904542]  [<c02cebc4>] __sk_mem_schedule+0xdd/0x1c7
  [  762.904542]  [<c02d178d>] ? __alloc_skb+0x76/0x100
  [  762.904542]  [<c0305e8e>] sk_wmem_schedule+0x21/0x2d
  [  762.904542]  [<c0306370>] sk_stream_alloc_skb+0x42/0xaa
  [  762.904542]  [<c0306567>] tcp_sendmsg+0x18f/0x68b
  [  762.904542]  [<c031f3dc>] ? ip_fast_csum+0x30/0x30
  [  762.904542]  [<c0320193>] inet_sendmsg+0x53/0x5a
  [  762.904542]  [<c02cb633>] sock_aio_write+0xd2/0xda
  [  762.904542]  [<c015876b>] ? mark_lock+0x26/0x1bb
  [  762.904542]  [<c01a1017>] do_sync_write+0x9f/0xd9
  [  762.904542]  [<c01a2111>] ? file_free_rcu+0x2f/0x2f
  [  762.904542]  [<c01a17a1>] vfs_write+0x8f/0xab
  [  762.904542]  [<c01a284d>] ? fget_light+0x75/0x7c
  [  762.904542]  [<c01a1900>] sys_write+0x3d/0x5e
  [  762.904542]  [<c0349ec9>] syscall_call+0x7/0xb
  [  762.904542]  [<c0340000>] ? rp_sidt+0x41/0x83

Bug is that sk_sockets_allocated_read_positive() calls
percpu_counter_sum_positive() without BH being disabled.

This bug was added in commit 180d8cd9
(foundations of per-cgroup memory pressure controlling.), since previous
code was using percpu_counter_read_positive() which is IRQ safe.

In __sk_mem_schedule() we dont need the precise count of allocated
sockets and can revert to previous behavior.
Reported-by: NDenys Fedoryshchenko <denys@visp.net.lb>
Sined-off-by: NEric Dumazet <edumazet@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current checking always succeeded. We have to check the first
character of the string to check that it's empty, thus, skipping
the timeout path.

This fixes the use of the CT target without the timeout option.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Change order of init so netns init is ready
when register ioctl and netlink.

Ver2
	Whitespace fixes and __init added.
Reported-by: N"Ryan O'Hara" <rohara@redhat.com>
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

ip_vs_create_timeout_table() can return NULL
All functions protocol init_netns is affected of this patch.
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Avoid crash when registering shedulers after
the IPVS core initialization for netns fails. Do this by
checking for present core (net->ipvs).
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Eric Dumazet pointed out to me that the drop_monitor protocol has some holes in
its smp protections.  Specifically, its possible to replace data->skb while its
being written.  This patch corrects that by making data->skb an rcu protected
variable.  That will prevent it from being overwritten while a tracepoint is
modifying it.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: David Miller <davem@davemloft.net>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet pointed out this warning in the drop_monitor protocol to me:

[   38.352571] BUG: sleeping function called from invalid context at kernel/mutex.c:85
[   38.352576] in_atomic(): 1, irqs_disabled(): 0, pid: 4415, name: dropwatch
[   38.352580] Pid: 4415, comm: dropwatch Not tainted 3.4.0-rc2+ #71
[   38.352582] Call Trace:
[   38.352592]  [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0
[   38.352599]  [<ffffffff81063f2a>] __might_sleep+0xca/0xf0
[   38.352606]  [<ffffffff81655b16>] mutex_lock+0x26/0x50
[   38.352610]  [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0
[   38.352616]  [<ffffffff810b72d9>] tracepoint_probe_register+0x29/0x90
[   38.352621]  [<ffffffff8153a585>] set_all_monitor_traces+0x105/0x170
[   38.352625]  [<ffffffff8153a8ca>] net_dm_cmd_trace+0x2a/0x40
[   38.352630]  [<ffffffff8154a81a>] genl_rcv_msg+0x21a/0x2b0
[   38.352636]  [<ffffffff810f8029>] ? zone_statistics+0x99/0xc0
[   38.352640]  [<ffffffff8154a600>] ? genl_rcv+0x30/0x30
[   38.352645]  [<ffffffff8154a059>] netlink_rcv_skb+0xa9/0xd0
[   38.352649]  [<ffffffff8154a5f0>] genl_rcv+0x20/0x30
[   38.352653]  [<ffffffff81549a7e>] netlink_unicast+0x1ae/0x1f0
[   38.352658]  [<ffffffff81549d76>] netlink_sendmsg+0x2b6/0x310
[   38.352663]  [<ffffffff8150824f>] sock_sendmsg+0x10f/0x130
[   38.352668]  [<ffffffff8150abe0>] ? move_addr_to_kernel+0x60/0xb0
[   38.352673]  [<ffffffff81515f04>] ? verify_iovec+0x64/0xe0
[   38.352677]  [<ffffffff81509c46>] __sys_sendmsg+0x386/0x390
[   38.352682]  [<ffffffff810ffaf9>] ? handle_mm_fault+0x139/0x210
[   38.352687]  [<ffffffff8165b5bc>] ? do_page_fault+0x1ec/0x4f0
[   38.352693]  [<ffffffff8106ba4d>] ? set_next_entity+0x9d/0xb0
[   38.352699]  [<ffffffff81310b49>] ? tty_ldisc_deref+0x9/0x10
[   38.352703]  [<ffffffff8106d363>] ? pick_next_task_fair+0x63/0x140
[   38.352708]  [<ffffffff8150b8d4>] sys_sendmsg+0x44/0x80
[   38.352713]  [<ffffffff8165f8e2>] system_call_fastpath+0x16/0x1b

It stems from holding a spinlock (trace_state_lock) while attempting to register
or unregister tracepoint hooks, making in_atomic() true in this context, leading
to the warning when the tracepoint calls might_sleep() while its taking a mutex.
Since we only use the trace_state_lock to prevent trace protocol state races, as
well as hardware stat list updates on an rcu write side, we can just convert the
spinlock to a mutex to avoid this problem.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: David Miller <davem@davemloft.net>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver currently leaves elp_work behind when stopping, which
occasionally results in data corruption because work function ends
up accessing freed memory, typical symptoms of this are various
worker_thread crashes. Fix it by cancelling elp_work.

Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Currently SDIO glue frees it's own structure before calling
wl1251_free_hw(), which in turn calls ieee80211_unregister_hw().
The later call may result in a need to communicate with the chip
to stop it (as it happens now if the interface is still up before
rmmod), which means calls are made back to the glue, resulting in
freed memory access.

Fix this by freeing glue data last.

Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Commit 2a190322 (b43: reload phy and bss settings after core restarts)
introduced an unconditional call to b43_op_config() at the end of
b43_op_start(). When firmware fails to load this can wedge the system.
There's no need to reload the configuration after a failed
initialization anyway, so only make the call if initialization was
successful.

BugLink: http://bugs.launchpad.net/bugs/950295
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

"iwlwifi: use correct released ucode version" change
the ucode api ok from 6000G2 to 6000G2B, but it shall belong
to 6030 device series, not the 6005 device series. Fix it

Cc: stable@vger.kernel.org #3.3+
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When our driver device is removed on the AHB bus, our IO memory is never unmapped.
Signed-off-by: NJonathan Bither <jonbither@gmail.com>
Reviewed-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

dpc takes care of all data packets transmissions for sdio function
2. It is possible that it misses some completion events when the
traffic is heavy or it's running on a slow cpu. A linked list is
introduced to make sure dpc is invoked whenever needed.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

SDIO stack doesn't have a structure for function 0. The structure
pointer stored in card->sdio_func[0] is actually for function 1.
With current implementation the register read/write is applied to
function 1. This pathch fixes the issue.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFlorian Fainelli <florian@openwrt.org>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Clean up a reference to jiffies in tcp_rcv_rtt_measure() that should
instead reference tcp_time_stamp. Since the result of the subtraction
is passed into a function taking u32, this should not change any
behavior (and indeed the generated assembly does not change on
x86_64). However, it seems worth cleaning this up for consistency and
clarity (and perhaps to avoid bugs if this is copied and pasted
somewhere else).
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>