1. 12 9月, 2008 1 次提交
    • D
      sparc64: Define WANT_PAGE_VIRTUAL · b0f1e796
      David S. Miller 提交于
      As sparse warns, without this struct page pointer subtraction is
      extremely expensive, and this is a pretty common operation in
      fast paths.
      
      With this define struct page becomes 64 bytes which makes for a
      simple subtract and shift, instead of a costly divide or reciprocol
      multiply.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b0f1e796
  2. 28 7月, 2008 1 次提交
    • S
      sparc, sparc64: use arch/sparc/include · a439fe51
      Sam Ravnborg 提交于
      The majority of this patch was created by the following script:
      
      ***
      ASM=arch/sparc/include/asm
      mkdir -p $ASM
      git mv include/asm-sparc64/ftrace.h $ASM
      git rm include/asm-sparc64/*
      git mv include/asm-sparc/* $ASM
      sed -ie 's/asm-sparc64/asm/g' $ASM/*
      sed -ie 's/asm-sparc/asm/g' $ASM/*
      ***
      
      The rest was an update of the top-level Makefile to use sparc
      for header files when sparc64 is being build.
      And a small fixlet to pick up the correct unistd.h from
      sparc64 code.
      Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      a439fe51
  3. 25 7月, 2008 1 次提交
    • A
      PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures · 27ac792c
      Andrea Righi 提交于
      On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
      boundary. For example:
      
      	u64 val = PAGE_ALIGN(size);
      
      always returns a value < 4GB even if size is greater than 4GB.
      
      The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
      example):
      
      #define PAGE_SHIFT      12
      #define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
      #define PAGE_MASK       (~(PAGE_SIZE-1))
      ...
      #define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)
      
      The "~" is performed on a 32-bit value, so everything in "and" with
      PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
      Using the ALIGN() macro seems to be the right way, because it uses
      typeof(addr) for the mask.
      
      Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
      include/linux/mm.h.
      
      See also lkml discussion: http://lkml.org/lkml/2008/6/11/237
      
      [akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
      [akpm@linux-foundation.org: fix v850]
      [akpm@linux-foundation.org: fix powerpc]
      [akpm@linux-foundation.org: fix arm]
      [akpm@linux-foundation.org: fix mips]
      [akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
      [akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
      [akpm@linux-foundation.org: fix powerpc]
      Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      27ac792c
  4. 18 7月, 2008 2 次提交
    • D
      sparc64: Remove 4MB and 512K base page size options. · f7fe9334
      David S. Miller 提交于
      Adrian Bunk reported that enabling 4MB page size breaks the build.
      The problem is that MAX_ORDER combined with the page shift exceeds the
      SECTION_SIZE_BITS we use in asm-sparc64/sparsemem.h
      
      There are several ways I suppose we could work around this.  For one
      we could define a CONFIG_FORCE_MAX_ZONEORDER to decrease MAX_ORDER in
      these higher page size cases.
      
      But I also know that these page size cases are broken wrt. TLB miss
      handling especially on pre-hypervisor systems, and there isn't an easy
      way to fix that.
      
      These options were meant to be fun experimental hacks anyways, and
      only 8K and 64K make any sense to support.
      
      So remove 512K and 4M base page size support.  Of course, we still
      support these page sizes for huge pages.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f7fe9334
    • S
      sparc: join the remaining header files · f5e706ad
      Sam Ravnborg 提交于
      With this commit all sparc64 header files are moved to asm-sparc.
      The remaining files (71 files) were too different to be trivially
      merged so divide them up in a _32.h and a _64.h file which
      are both included from the file with no bit size.
      
      The following script were used:
      cd include
      FILES=`wc -l asm-sparc64/*h | grep -v '^     1' | cut -b 20-`
      
      for FILE in ${FILES}; do
        echo $FILE:
        BASE=`echo $FILE | cut -d '.' -f 1`
        FN32=${BASE}_32.h
        FN64=${BASE}_64.h
        GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
        git mv asm-sparc/$FILE asm-sparc/$FN32
        git mv asm-sparc64/$FILE asm-sparc/$FN64
        echo git mv done
        printf "#ifndef %s\n" $GUARD                             >   asm-sparc/$FILE
        printf "#define %s\n" $GUARD                             >>  asm-sparc/$FILE
        printf "#if defined(__sparc__) && defined(__arch64__)\n" >>  asm-sparc/$FILE
        printf "#include <asm-sparc/%s>\n" $FN64                 >>  asm-sparc/$FILE
        printf "#else\n"                                         >>  asm-sparc/$FILE
        printf "#include <asm-sparc/%s>\n" $FN32                 >>  asm-sparc/$FILE
        printf "#endif\n"                                        >>  asm-sparc/$FILE
        printf "#endif\n"                                        >>  asm-sparc/$FILE
        git add asm-sparc/$FILE
        echo new file done
        printf "#include <asm-sparc/%s>\n" $FILE                 >  asm-sparc64/$FILE
        git add asm-sparc64/$FILE
        echo sparc64 file done
      done
      
      The guard contains three '_' to avoid conflict with existing guards.
      In additing the two Kbuild files are emptied to avoid breaking
      headers_* targets.
      We will reintroduce the exported header files when the necessary
      kbuild changes are merged.
      Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f5e706ad
  5. 20 5月, 2008 1 次提交
  6. 28 4月, 2008 1 次提交
    • G
      hugetlbfs: architecture header cleanup · 6d779079
      Gerald Schaefer 提交于
      This patch moves all architecture functions for hugetlb to architecture header
      files (include/asm-foo/hugetlb.h) and converts all macros to inline functions.
       It also removes (!) ARCH_HAS_HUGEPAGE_ONLY_RANGE,
      ARCH_HAS_HUGETLB_FREE_PGD_RANGE, ARCH_HAS_PREPARE_HUGEPAGE_RANGE,
      ARCH_HAS_SETCLEAR_HUGE_PTE and ARCH_HAS_HUGETLB_PREFAULT_HOOK.
      
      Getting rid of the ARCH_HAS_xxx #ifdef and macro fugliness should increase
      readability and maintainability, at the price of some code duplication.  An
      asm-generic common part would have reduced the loc, but we would end up with
      new ARCH_HAS_xxx defines eventually.
      Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6d779079
  7. 09 2月, 2008 1 次提交
    • M
      CONFIG_HIGHPTE vs. sub-page page tables. · 2f569afd
      Martin Schwidefsky 提交于
      Background: I've implemented 1K/2K page tables for s390.  These sub-page
      page tables are required to properly support the s390 virtualization
      instruction with KVM.  The SIE instruction requires that the page tables
      have 256 page table entries (pte) followed by 256 page status table entries
      (pgste).  The pgstes are only required if the process is using the SIE
      instruction.  The pgstes are updated by the hardware and by the hypervisor
      for a number of reasons, one of them is dirty and reference bit tracking.
      To avoid wasting memory the standard pte table allocation should return
      1K/2K (31/64 bit) and 2K/4K if the process is using SIE.
      
      Problem: Page size on s390 is 4K, page table size is 1K or 2K.  That means
      the s390 version for pte_alloc_one cannot return a pointer to a struct
      page.  Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one
      cannot return a pointer to a pte either, since that would require more than
      32 bit for the return value of pte_alloc_one (and the pte * would not be
      accessible since its not kmapped).
      
      Solution: The only solution I found to this dilemma is a new typedef: a
      pgtable_t.  For s390 pgtable_t will be a (pte *) - to be introduced with a
      later patch.  For everybody else it will be a (struct page *).  The
      additional problem with the initialization of the ptl lock and the
      NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and
      a destructor pgtable_page_dtor.  The page table allocation and free
      functions need to call these two whenever a page table page is allocated or
      freed.  pmd_populate will get a pgtable_t instead of a struct page pointer.
       To get the pgtable_t back from a pmd entry that has been installed with
      pmd_populate a new function pmd_pgtable is added.  It replaces the pmd_page
      call in free_pte_range and apply_to_pte_range.
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2f569afd
  8. 08 2月, 2008 1 次提交
  9. 09 5月, 2007 1 次提交
  10. 21 9月, 2006 1 次提交
  11. 26 4月, 2006 1 次提交
  12. 28 3月, 2006 1 次提交
    • K
      [PATCH] unify pfn_to_page: generic functions · a117e66e
      KAMEZAWA Hiroyuki 提交于
      There are 3 memory models, FLATMEM, DISCONTIGMEM, SPARSEMEM.
      Each arch has its own page_to_pfn(), pfn_to_page() for each models.
      But most of them can use the same arithmetic.
      
      This patch adds asm-generic/memory_model.h, which includes generic
      page_to_pfn(), pfn_to_page() definitions for each memory model.
      
      When CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y, out-of-line functions are
      used instead of macro. This is enabled by some archs and  reduces
      text size.
      Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Hugh Dickins <hugh@veritas.com>
      Cc: Andi Kleen <ak@muc.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Richard Henderson <rth@twiddle.net>
      Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ian Molton <spyro@f2s.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
      Cc: Richard Curnow <rc@rc0.org.uk>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Jeff Dike <jdike@addtoit.com>
      Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
      Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
      Cc: Chris Zankel <chris@zankel.net>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      a117e66e
  13. 22 3月, 2006 1 次提交
  14. 20 3月, 2006 3 次提交
  15. 29 9月, 2005 1 次提交
  16. 20 9月, 2005 1 次提交
  17. 05 9月, 2005 1 次提交
  18. 22 6月, 2005 1 次提交
    • D
      [PATCH] Hugepage consolidation · 63551ae0
      David Gibson 提交于
      A lot of the code in arch/*/mm/hugetlbpage.c is quite similar.  This patch
      attempts to consolidate a lot of the code across the arch's, putting the
      combined version in mm/hugetlb.c.  There are a couple of uglyish hacks in
      order to covert all the hugepage archs, but the result is a very large
      reduction in the total amount of code.  It also means things like hugepage
      lazy allocation could be implemented in one place, instead of six.
      
      Tested, at least a little, on ppc64, i386 and x86_64.
      
      Notes:
      	- this patch changes the meaning of set_huge_pte() to be more
      	  analagous to set_pte()
      	- does SH4 need s special huge_ptep_get_and_clear()??
      Acked-by: NWilliam Lee Irwin <wli@holomorphy.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      63551ae0
  19. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds 提交于
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4