This is a dependency for mxs/multiplatform
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Conflicts:
	drivers/clocksource/Makefile

Merge tag 'ux500-multiplatform-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/multiplatform

From Linus Walleij <linus.walleij@linaro.org>:

Ux500 multiplatform support.  This tag builds upon the MFD-specific base
tag "ux500-multiplatform-mfd". This removes all <mach/*> dependencies
and makes the ux500 fully multi-platform.

* tag 'ux500-multiplatform-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
  staging: ste_rmi4: kill platform_data hack
  ARM: ux500: move mach/msp.h to <linux/platform_data/*>
  clk: ux500: pass clock base adresses in init call
  ARM: ux500: make debug macro stand-alone
  ARM: ux500: move debugmacro to debug includes
  ARM: ux500: split out prcmu initialization
  mfd: db8500-prcmu: drop unused includes
  ARM: ux500: move PM-related PRCMU functions to machine
  mfd: db8500-prcmu: get base address from resource
  mfd: prcmu: pass a base and size with the early initcall

Conflicts:
	arch/arm/Kconfig
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Linux 3.9-rc3

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-spear/spear3xx.c
	arch/arm/plat-spear/Kconfig

This is a dependency for ux500/multiplatform
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/multiplatform

From Stephen Warren <swarren@wwwdotorg.org>:

ARM: bcm2835: convert to multi-platform

This branch (patch) converts BCM2835 to support being built into a
multi-platform single zImage. This mostly entails a few small Kconfig
tweaks, move the earlyprintk implementation to the standard multi-
platform location, and deleting some unnecessary files.

* tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: convert to multi-platform

Conflicts:
	arch/arm/Kconfig
	arch/arm/Kconfig.debug
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

If we try to build this file in a multiplatform configuration with
ARMv6 enabled, gas complains about the dsb operation being undefined.
Adding -march=armv7-a is safe because that code is only ever run
on ux500, which is Cortex-A9.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Nothing is holding us up any more, and we can make ux500 coexist
with the rest of the platforms. The timex.h and uncompress.h
headers are no longer needed now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

mach/setup.h and mach/devices.h are only needed from inside of mach-ux500
now, so we can simply move them out of the include/mach directory.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

With the PRCMU out of the way, nothing outside of mach-ux500
uses mach/irqs.h any more, so we can make it a local header file,
including the two sub-headers.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This removes <mach/hardware.h> and <mach/db8500-regs.h>
from the Ux500, merging them into the local include
"db8500-regs.h" in mach-ux500. There is some impact
outside the ux500 machine, but most of it is dealt with
in earlier patches.

Contains portions of a clean-up patch from Arnd Bergmann.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

There is only one instance of the platform data for synaptics_i2c_rmi4
in the mainline kernel, so there is no point of pretending its
variable here. The only member that has a dependency on the platform
is actually the interrupt number, and there is a field in the
i2c_client structure that gets initialized from the board info,
so we can trivially move the board_into into the platform without
knowledge of the platform_data structure.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This header file only contains platform data structure definitions,
so it's straightforward to move.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[Delete one include rather than move it]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The ux500 clock driver was including <mach/db8500-regs.h>
which will not work when building for multiplatform support
since <mach/*> is going away.

Pass the base adresses in the init call instead.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This pushes the knowledge of physical addresses down into
the debug macro so we can get rid of the <mach/hardware.h>
dependency.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This moves the Ux500 debug macro to the debug headers to
make way for multiplatform support.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This untangles the final bits of the prcmu code from the platform
code:

* The IRQ_PRCMU_* definitions move from irqs-db8500.h into prcmu.c
  because they are only of local significance.
* u8500_thsens_device goes into the prcmu, because it uses a PRCMU
  IRQ that the platform does not see.
* IRQ_DB8500_AB8500 and IRQ_PRCMU_BASE go into the platform data
  because the PRCMU does not see it.
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[Fixed a oneliner bug]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

These two <mach/*> includes are no longer used in the
PRCMU driver, so drop them.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We are trying to decompose and decentralize the code in
the DB8500 PRCMU out into subdrivers. The code moved in
this patch concerns a group of functions used for
decoupling and recoupling the IRQs from the GIC. During
sleep and idle the Ux500 system will transfer all IRQ
handling to the PRCMU using these functions.

Basically we are left with the two alternatives of code
placement as:

- arch/arm/mach-ux500/pm.c - this because the code is
  closely related to the GIC, and takes ownership of
  some of the registers from the PRCMU related to this
  PM functionality.

- drivers/mfd/db8500-prcmu-pm.c - because the code is
  affecting stuff in the PRCMU register range. But then
  this code needs to remap and handle GIC registers.

This patch implementation is taking the first approach.

Currently the cpuidle driver is the only piece of code
using this set of functions, but it will later also be
used by the suspend/resume code which is currently under
review.

The header file is moved to:
<linux/platform_data/arm-ux500-pm.h>
The function prototypes need to be placed in a globally
visible header since the CPUidle code is planned to move
out to drivers/cpuidle.
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Acked-by: NRickard Andersson <rickard.andersson@stericsson.com>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We cannot use a global variable stored in <mach/hardware.h> to
find the base address of the PRCMU. The real resource is already
there from the board, so use this to look up the base address
instead.

Currently the patch is kept minimal so as not to interfere with
other work being done on refactoring this driver, but at a later
point the defines using (prcmu_base + 0xnnn) need to be replaced
by pure offset defined for (0xnnn) and the base inlined with the
readl()/writel() and similar codepaths.
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch will make an early remapping of the PRCMU, to be
used when setting up the clocks, that will call down into parts
of the PRCMU driver before it is probed.

Going forward this will be removed like this:

- The mailbox subsystem need to be merged.
  http://marc.info/?l=linux-kernel&m=136314559201983&w=2

- At this point the PRCMU clock code can be moved over to the
  ux500 clock driver in drivers/clk/ux500/* and maintained
  there in a decentralized manner.

- This early initcall and PRCMU base parameters become part of
  the ux500_clk_init() call instead.

Cc: Suman Anna <s-anna@ti.com>
Cc: Loic Pallardy <loic.pallardy@st.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Fix the following build error:

drivers/clocksource/mxs_timer.c:304:1: error: expected ',' or ';' at end of input
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This patch finally adds the WM8850 SoC to the multi_v7_defconfig.
We don't have a seperate defconfig for this SoC as it is only
available as a multiplatform option.
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Most of the stuff in the headers are used nowhere now.  Move a few
things that are useful for mach-mxs.c into there and remove the headers.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Most of the function hooks are same between imx23 and imx28
machine_desc, so merge them into one.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

All three remaining functions declared in common.h are implemented by
clock driver.  Create header include/linux/clk/mxs.h to contain them
and remove common.h.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

All the users of mxs_get_ocotp() are in mach-mxs.c.  Move the function
into mach-mxs.c, make it a static function, and then remove ocotp.c.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The static mapping is used nowhere now.  Hence mm.c can be removed
completely.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The only user of the static mapping done in mx23_map_io and mx28_map_io
is low-level debug now.  Use debug_ll_io_init() instead, so that the
static mapping is used nowhere and can be removed completely later.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Instead of using the static definitions, get ocotp base address from
device tree with mapping.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

There is no user of function mxs_reset_block() now.  Let's move
mxs_restart() into mach-mxs.c as a static function and remove system.c
completely.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Instead of using static address definition, get reset address from
device tree with mapping, so that core_initcall mxs_arch_reset_init()
can be killed.

The "rtc" clock code in mxs_arch_reset_init() seems to be zombie, since
there is no clk lookup defined in clock driver at all.  Remove it
together.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The hardware.h is an empty header and used nowhere now.  Remmove it.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The header <mach/hardware.h> is not needed at all, and <mach/mxs.h> is
needed only for macros MXS_SET_ADDR and MXS_CLR_ADDR.  Define the macros
and remove the mach header inclusions.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Headers <mach/mxs.h> and <mach/common.h> are not used in the driver
at all.  Removed the inclusions.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>

The function stmp_reset_block() provides the exactly same functionality
as mxs_reset_block().  So use stmp_reset_block() instead, so that
<mach/common.h> inclusion can be removed.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: rtc-linux@googlegroups.com

It removes the use of mach level IO accessor __mxs_setl/clrl, and hence
removes mach header inclusion from clock driver.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>

Instead of using the static definitions, get clkctrl and digctl base
addresses with mapping from device tree.

Use macro on variable is not nice, but it's done here to save huge
pointless diff stat.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>

Remove the unneeded mach-types.h inclusion from mxs.h, which is a
leftover from commit 845da6bf (ARM: mxs: detect SoC by checking CHIPID
register).
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Move icoll.c into drivers/irqchip as irq-mxs.c, and along with the
renaming, change the driver to use IRQCHIP_DECLARE.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Call stmp_reset_block() rather than mxs_reset_block(), so that
<mach/common.h> inclusion can be removed from icoll driver.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Rather than using the static definition, it gets icoll base address
with mapping from device tree.

As the result, <mach/mxs.h> inclusion can be removed from the driver
now.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>