The midlayer won't scan the host ID, so we don't need to check.
This is the only caller of sym_xpt_done2, so remove that too.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Before all commands used sg, data_mapping and data_mapped were used to
distinguish whether the command had used map_single or map_sg.  Now all
commands are sg, so we can delete data_mapping, data_mapped and the
wrapper functions __unmap_scsi_data, __map_scsi_sg_data, unmap_scsi_data
and map_scsi_sg_data.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Don't cache a private copy of the interrupt number
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Prevent DMA transfers from crossing the 16MB limit for early 53c896 chips.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

i think there is wasted space in allocated pages for request and
response rings.  The allocations are made with REQUEST_ENTRY_CNT + 1
and RESPONSE_ENTRY_CNT + 1, but they are set with 256 and 16.

So we got more pages, which we dont use very much so eliminate them.
Signed-off-by: NJohannes Dickgreber <tanzy@gmx.de>
Acked-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

If a prefix is selected for flex, we should be using it everywhere.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Might as well take the blame officially.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The aic7xxx driver already contains fragments for suspend/resume
support. So we only need to update them to the current interface
and have full PCI suspend/resume.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Tested-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

A failure here wouldn't currently free the irq; go to the irq free
path instead.
Signed-off-by: NJohannes Dickgreber <tanzy@gmx.de>
Acked-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch fixes the following build warnings:

WARNING: vmlinux.o(.text+0xbcffdb): Section mismatch: reference to .init.text.20:gdth_search_drives (between 'gdth_pci_probe_one' and 'gdth_start_timeout')
WARNING: vmlinux.o(.text+0xbd0102): Section mismatch: reference to .init.text.20:gdth_enable_int (between 'gdth_pci_probe_one' and 'gdth_start_timeout')
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Commit bbfbbbc1 accidentally reversed
the logic of this NULL check.

Spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/qla2xxx/qla_sup.c: In function 'qla24xx_write_flash_data':
drivers/scsi/qla2xxx/qla_sup.c:655: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'
drivers/scsi/qla2xxx/qla_sup.c: In function 'qla25xx_read_optrom_data':
drivers/scsi/qla2xxx/qla_sup.c:1853: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch fixes a typo introduced by
commit bbfbbbc1.

It wasn't a compile error since CONFIG_LPFC_DEBUG_FS is not (yet?)
available as an option.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix IRQ reporting - just assign the ->pci_dev pointer earlier and use the
pci_dev irq field rather than keeping a private one

Init the spinlock as it works better on SMP that way
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The newer firmware may return more than 96 bytes of sense data when it
does autosense.  Truncate this to the size of the SCSI layer sense
buffer to avoid an overrun.
Signed-off-by: NHighPoint Linux Team <linux@highpoint-tech.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

if shost->supported mode is zero (i.e. MODE_UNKNOWN) show it as
initiator (it's obviously an unconverted driver that won't do target).
Acked-by: NFUJITA Tomonori <tomof@acm.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Spotted by Paul Jackson <pj@sgi.com>

The error handler rework moved the scatterlist into a globally exposed
structure in scsi_eh.h; unfortunately, the scatterlist include needs
to move from scsi_error.c to scsi_eh.h to allow this to compile
universally.
Acked-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This code has been slowly rotting for about eight years.  It's currently
impeding a few SCSI cleanups, and nobody seems to have hardware to test
it any more.  I talked to Dave Miller about it, and he agrees we can
delete it.  If anyone wants a software FC stack in future, they can
retrieve this driver from git.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix non-numa build

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: remove sysctl
  9p: fix bad kconfig cross-dependency
  9p: soften invalidation in loose_mode
  9p: attach-per-user
  9p: rename uid and gid parameters
  9p: define session flags
  9p: Make transports dynamic

arch/ia64/kernel/machine_kexec.c: In function `arch_crash_save_vmcoreinfo':
arch/ia64/kernel/machine_kexec.c:131: error: `pgdat_list' undeclared (first use in this function)
arch/ia64/kernel/machine_kexec.c:131: error: (Each undeclared identifier is reported only once
arch/ia64/kernel/machine_kexec.c:131: error: for each function it appears in.)
arch/ia64/kernel/machine_kexec.c:134: error: `node_memblk' undeclared (first use in this function)
arch/ia64/kernel/machine_kexec.c:135: error: `NR_NODE_MEMBLKS' undeclared (first use in this function)
arch/ia64/kernel/machine_kexec.c:136: error: invalid application of `sizeof' to incomplete type `node_memblk_s'
arch/ia64/kernel/machine_kexec.c:137: error: dereferencing pointer to incomplete type
arch/ia64/kernel/machine_kexec.c:138: error: dereferencing pointer to incomplete type
make[1]: *** [arch/ia64/kernel/machine_kexec.o] Error 1
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  net: libertas sdio driver
  mmc: at91_mci: cleanup: use MCI_ERRORS
  mmc: possible leak in mmc_read_ext_csd

Add driver for Marvell's Libertas 8385 and 8686 wifi chips.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Acked-by: NDan Williams <dcbw@redhat.com>

* ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86: (114 commits)
  x86: delete vsyscall files during make clean
  kbuild: fix typo SRCARCH in find_sources
  x86: fix kernel rebuild due to vsyscall fallout
  .gitignore update for x86 arch
  x86: unify include/asm/debugreg_32/64.h
  x86: unify include/asm/unwind_32/64.h
  x86: unify include/asm/types_32/64.h
  x86: unify include/asm/tlb_32/64.h
  x86: unify include/asm/siginfo_32/64.h
  x86: unify include/asm/bug_32/64.h
  x86: unify include/asm/mman_32/64.h
  x86: unify include/asm/agp_32/64.h
  x86: unify include/asm/kdebug_32/64.h
  x86: unify include/asm/ioctls_32/64.h
  x86: unify include/asm/floppy_32/64.h
  x86: apply missing DMA/OOM prevention to floppy_32.h
  x86: unify include/asm/cache_32/64.h
  x86: unify include/asm/cache_32/64.h
  x86: unify include/asm/dmi_32/64.h
  x86: unify include/asm/delay_32/64.h
  ...

make clean failed to delete a few files in
x86/kernel. This is because kbuild does not
see the correct/full kernel/Makefile.

As a workaround until the Makefiles are merged specify
the files to be deleted in the common Makefile.

Reported by Mike Galbraith <efault@gmx.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

otherwise get the two copy file list in SRCARCH

for cscope:
C symbol: start_kernel

  File           Function            Line
0 proto.h        <global>              11 extern void start_kernel(void );
1 start_kernel.h <global>              10 extern asmlinkage void __init start_kernel(void );
2 head32.c       i386_start_kernel     37 start_kernel();
3 head32.c       i386_start_kernel     37 start_kernel();
4 head64.c       x86_64_start_kernel   85 start_kernel();
5 head64.c       x86_64_start_kernel   85 start_kernel();
6 head_32.S      options              199 cmpb $0,%cl #the first CPU calls start_kernel
7 head_32.S      options              199 cmpb $0,%cl #the first CPU calls start_kernel
8 enlighten.c    xen_start_kernel    1145 start_kernel();
9 enlighten.c    xen_start_kernel    1145 start_kernel();
a lguest.c       lguest_init         1095 start_kernel();
b main.c         start_kernel         513 asmlinkage void __init start_kernel(void )

after the patch:
C symbol: start_kernel

  File           Function            Line
0 proto.h        <global>              11 extern void start_kernel(void );
1 start_kernel.h <global>              10 extern asmlinkage void __init start_kernel(void );
2 head32.c       i386_start_kernel     37 start_kernel();
3 head64.c       x86_64_start_kernel   85 start_kernel();
4 head_32.S      options              199 cmpb $0,%cl #the first CPU calls start_kernel
5 enlighten.c    xen_start_kernel    1145 start_kernel();
6 lguest.c       lguest_init         1095 start_kernel();
7 main.c         start_kernel         513 asmlinkage void __init start_kernel(void )
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

A sysctl method was added to enable and disable debugging levels.  After
further review, it was decided that there are better approaches to doing this
and the sysctl methodology isn't really desirable.  This patch removes the
sysctl code from 9p.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
  

A small MMC driver cleanup.

Use the defined AT91_MCI_ERRORS in at91_mci_completed_command() instead
of specifying all the error bits individually.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

The exception path associated with an invalid ext_csd_struct returns
without freeing ext_csd.

Coverity CID 1909.

Signed-off-by: Florin Malita
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This patch moves transport dynamic registration and matching to the net
module to prevent a bad Kconfig dependency between the net and fs 9p modules.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Loose mode in 9p utilizes the page cache without respecting coherency with
the server.  Any writes previously invaldiated the entire mapping for a file.
This patch softens the behavior to only invalidate the region of the actual
write.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The 9P2000 protocol requires the authentication and permission checks to be
done in the file server. For that reason every user that accesses the file
server tree has to authenticate and attach to the server separately.
Multiple users can share the same connection to the server.

Currently v9fs does a single attach and executes all I/O operations as a
single user. This makes using v9fs in multiuser environment unsafe as it
depends on the client doing the permission checking.

This patch improves the 9P2000 support by allowing every user to attach
separately. The patch defines three modes of access (new mount option
'access'):

- attach-per-user (access=user) (default mode for 9P2000.u)
 If a user tries to access a file served by v9fs for the first time, v9fs
 sends an attach command to the server (Tattach) specifying the user. If
 the attach succeeds, the user can access the v9fs tree.
 As there is no uname->uid (string->integer) mapping yet, this mode works
 only with the 9P2000.u dialect.

- allow only one user to access the tree (access=<uid>)
 Only the user with uid can access the v9fs tree. Other users that attempt
 to access it will get EPERM error.

- do all operations as a single user (access=any) (default for 9P2000)
 V9fs does a single attach and all operations are done as a single user.
 If this mode is selected, the v9fs behavior is identical with the current
 one.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Change the names of 'uid' and 'gid' parameters to the more appropriate
'dfltuid' and 'dfltgid'.  This also sets the default uid/gid to -2
(aka nfsnobody)
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Create more general flags field in the v9fs_session_info struct and move the
'extended' flag as a bit in the flags.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch abstracts out the interfaces to underlying transports so that
new transports can be added as modules.  This should also allow kernel
configuration of transports without ifdef-hell.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Fix rebuild of kernel when there is no changes.
This happened for i386.
Using make V=2 hinted that the output files were
not assigned to targets - fixed by this patch.

Reported by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch:
- makes .gitignore files visible to git
- makes arch/x86/kernel/vsyscall_32.lds and arch/i386/boot invisible
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [BLOCK] blk_rq_map_sg() next_sg fixup
  Revert "[SCSI] Remove full sg table memset()"

Almost identical except for the extra DR_LEN_8 and the different
DR_CONTROL_RESERVED defines.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Conflicts:

	include/asm-x86/Kbuild

32bit has an extra UNW_FP define, which does not hurt.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>