Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 29 2月, 2008 1 次提交
    • J
      [POWERPC] spufs: fix order of sputrace thread IDs · 71791bee
      由 Jeremy Kerr 提交于 
      Currently, we get the following output from sputrace:

[5.097935954] 1606: spufs_ps_nopfn__enter (thread = 1605, spu = -1)
[5.097958164] 1606: spufs_ps_nopfn__insert (thread = 1605, spu = 15)
[5.097973529] 1607: spufs_ps_nopfn__enter (thread = 1605, spu = -1)
[5.097989174] 1607: spufs_ps_nopfn__insert (thread = 1605, spu = 14)

Which leads me to believe that 160[67] is the current thread ID, and
1605 is the context backing the psmap.

However, the 'current' and 'owner' tids are reversed - the 'current'
tid is on the right. This change puts the current thread ID in the
left-hand column instead, and renames the right to 'ctxthread'.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
      71791bee
  3. 28 2月, 2008 1 次提交
    • J
      [POWERPC] spufs: fix invalid scheduling of forgotten contexts · 0111a701
      由 Jeremy Kerr 提交于 
      At present, we have a situation where a context with no owner is
re-scheduled by spu_forget:

	Thread 1: reading regs file	Thread 2: context owner

					spu_forget()
						- ctx->owner = NULL
						- set SPU_SCHED_WAS_ACTIVE

	spu_acquire_saved()
	- context is in saved state

	spu_release_saved()
	- SPU_SCHED_WAS_ACTIVE is set,
	  so spu_activate() the context,
	  which now has no owner

In spu_forget(), we shouldn't be requesting a re-schedule by setting
SPU_SCHED_WAS_ACTIVE. This change removes the set_bit in spu_forget(),
so that spu_release_saved() doesn't reinsert this destroyed context on
to the run queue.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
      0111a701
  5. 27 2月, 2008 1 次提交
    • J
      [POWERPC] spufs: fix context destruction during psmap fault · d5883137
      由 Jeremy Kerr 提交于 
      We have a small window where a spu context may be destroyed while
we're servicing a page fault (from another thread) to the context's
problem state mapping.

After we up_read() the mmap_sem, it's possible that the context is
destroyed by its owning thread, and so the later references to ctx
are invalid. This can maifest as a deadlock on the (now free()-ed)
context state mutex.

This change adds a reference to the context before we release the
mmap_sem, so that the context cannot be destroyed.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
      d5883137
  7. 20 2月, 2008 1 次提交
  9. 19 2月, 2008 1 次提交
    • J
      [POWERPC] spufs: fix scheduler starvation by idle contexts · 4ef11014
      由 Jeremy Kerr 提交于 
      2.6.25 has a regression where we can starve the scheduler by creating
(N_SPES+1) contexts, then running them one at a time.

The final context will never be run, as the other contexts are loaded on
the SPEs, none of which are repoted as free (ie, spu->alloc_state !=
SPU_FREE), so spu_get_idle() doesn't give us a spu to run on. Because
all of the contexts are stopped, none are descheduled by the scheduler
tick, as spusched_tick returns if spu_stopped(ctx).

This change replaces the spu_stopped() check with checking for SCHED_IDLE
in ctx->policy. We set a context's policy to SCHED_IDLE when we're not
in spu_run(). We also favour SCHED_IDLE contexts when looking for contexts
to unbind, but leave their timeslice intact for later resumption.

This patch fixes the following test in the spufs-testsuite:
  tests/20-scheduler/02-yield-starvation
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
      4ef11014
  11. 15 2月, 2008 2 次提交
  13. 14 2月, 2008 4 次提交
    • G
      [POWERPC] Remove unused CONFIG_WANT_DEVICE_TREE · d4eac750
      由 Grant Likely 提交于 
      CONFIG_DEVICE_TREE was the only user of CONFIG_WANT_DEVICE_TREE but
it was removed in commit id 25431333
(bootwrapper: Build multiple cuImages).

This removes CONFIG_WANT_DEVICE_TREE from Kconfig and the defconfigs.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      d4eac750
    • M
      [POWERPC] Cell RAS: Remove DEBUG, and add license and copyright · bdb226ba
      由 Michael Ellerman 提交于 
      arch/powerpc/platforms/cell/ras.c still has DEBUG #defined, which is no
longer necessary.  Disable it - this disables two pr_debugs().

While we're there this file should have a copyright notice and license,
so add both.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      bdb226ba
    • A
      [POWERPC] free_property() must not be __init · 16e543ff
      由 Adrian Bunk 提交于 
      This fixes the following section mismatch:

<--  snip  -->

...
WARNING: vmlinux.o(.text+0x55648): Section mismatch in reference from the function .free_node() to the function .init.text:.free_property()
...

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      16e543ff
    • M
      Linux Kernel Markers: support multiple probes · fb40bd78
      由 Mathieu Desnoyers 提交于 
      RCU style multiple probes support for the Linux Kernel Markers.  Common case
(one probe) is still fast and does not require dynamic allocation or a
supplementary pointer dereference on the fast path.

- Move preempt disable from the marker site to the callback.

Since we now have an internal callback, move the preempt disable/enable to the
callback instead of the marker site.

Since the callback change is done asynchronously (passing from a handler that
supports arguments to a handler that does not setup the arguments is no
arguments are passed), we can safely update it even if it is outside the
preempt disable section.

- Move probe arm to probe connection. Now, a connected probe is automatically
  armed.

Remove MARK_MAX_FORMAT_LEN, unused.

This patch modifies the Linux Kernel Markers API : it removes the probe
"arm/disarm" and changes the probe function prototype : it now expects a
va_list * instead of a "...".

If we want to have more than one probe connected to a marker at a given
time (LTTng, or blktrace, ssytemtap) then we need this patch. Without it,
connecting a second probe handler to a marker will fail.

It allow us, for instance, to do interesting combinations :

Do standard tracing with LTTng and, eventually, to compute statistics
with SystemTAP, or to have a special trigger on an event that would call
a systemtap script which would stop flight recorder tracing.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Mason <mmlnx@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: David Smith <dsmith@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fb40bd78
  15. 09 2月, 2008 3 次提交
  17. 08 2月, 2008 9 次提交
  19. 07 2月, 2008 9 次提交
  21. 06 2月, 2008 8 次提交