This patch will enable headset mode for ALC234/ALC274/ALC294 platform.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We checked the quirks specific to the recent Intel chips by checking
the PCI IDs manually, but it's becoming messy with lots of IS_SKL()
and other macros, as the amount accumulated.

For simplification, here the new AZX_DRIVER_SKL type is introduced,
and check chip->driver_type instead of the manual PCI ID.  The short
name for this is still "HDA Intel PCH", so that it doesn't break the
existing user-space unnecessarily.
Suggested-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Broxton-T was a forgotten child and we didn't apply the quirks for
Skylake+ properly.  Meanwhile, a quirk for reducing the DMA latency
seems specific to the early Broxton model, so we leave as is.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add this functions, it could support ALC256 for HP depop functions.
It also can solve some ALC256 machine plug headset cause power
off issue.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Coffelake is another Intel part, so need to add PCI ID for it.
Signed-off-by: NMegha Dey <megha.dey@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand.  In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module.  We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.

However, this is basically a overshoot.  The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.

This patch achieves that by rewriting Kconfig slightly.  Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.

Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.

Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of the non-standard way to enable the build of snd-emux-synth
module inside Makefile, rewrite Kconfig to select the item explicitly
from each driver (sbawe and emu10k1).  This is the standard way.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.

The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig.  OK, that's easy.

The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module.  The driver that requires such sequencer components select
exclusively the kconfig items.  This is more straightforward and
standard way.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers.  Constify the corresponding static objects for better
hardening.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A disorder is found in some ALC269 quirk entries for ASUS (1043:xxxx),
which should have been sorted in PCI SSID order.  Rearrange them, so
that I won't overlook the already existing entry like I did a couple
of times in the past...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ASUS X705UD laptop requires the known fixup ALC256_FIXUP_ASUS_MIC
in order to fix headphone jack sensing and to enable use of the internal
microphone.

Unfortunately jack sensing for the headset mic is still not working.

[rearranged the position to keep the PCI SSID order -- tiwai]
Signed-off-by: NChris Chiu <chiu@endlessm.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the copy and the silence ops with the new PCM ops.
The conversion is straightforward with standard helper functions.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the copy and the silence ops with the new PCM ops.
The conversion is straightforward with standard helper functions.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the copy and the silence ops with the new PCM ops.
The conversion is straightforward with standard helper functions, and
now we can drop the bytes <-> frames conversions in callbacks.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the copy and the silence ops with the new ops.
The conversion is straightforward with standard helper functions, and
now we can drop the bytes <-> frames conversions in callbacks.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the copy and the silence ops with the new PCM ops.
Although we can refactor this messy code, at this time, the changes
are kept as small as possible.  Let's clean up later.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the copy and the silence ops with the new ops.
The conversion is straightforward with standard helper functions, and
now we can drop the bytes <-> frames conversions in callbacks.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the copy ops with the new copy_user and copy_kernel ops.
It's used only for a capture stream (for some hardware workaround),
thus we need no silence operation.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>