Currently, writes "cgroup.procs" and "cgroup.tasks" files are all
handled by __cgroup_procs_write() on both v1 and v2.  This patch
reoragnizes the write path so that there are common helper functions
that different write paths use.

While this somewhat increases LOC, the different paths are no longer
intertwined and each path has more flexibility to implement different
behaviors which will be necessary for the planned v2 thread support.

v3: - Restructured so that cgroup_procs_write_permission() takes
      @src_cgrp and @dst_cgrp.

v2: - Rolled in Waiman's task reference count fix.
    - Updated on top of nsdelegate changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>

Implement trivial cgroup_has_tasks() which tests whether
cgrp->nr_populated_csets is zero and replace the explicit local
populated test in cgroup_subtree_control().  This simplifies the code
and cgroup_has_tasks() will be used in more places later.
Signed-off-by: NTejun Heo <tj@kernel.org>

cgrp->populated_cnt counts both local (the cgroup's populated
css_sets) and subtree proper (populated children) so that it's only
zero when the whole subtree, including self, is empty.

This patch splits the counter into two so that local and children
populated states are tracked separately.  It allows finer-grained
tests on the state of the hierarchy which will be used to replace
css_set walking local populated test.
Signed-off-by: NTejun Heo <tj@kernel.org>

Signed-off-by: NTejun Heo <tj@kernel.org>

If we reach the limit of modprobe_limit threads running the next
request_module() call will fail.  The original reason for adding a kill
was to do away with possible issues with in old circumstances which would
create a recursive series of request_module() calls.

We can do better than just be super aggressive and reject calls once we've
reached the limit by simply making pending callers wait until the
threshold has been reduced, and then throttling them in, one by one.

This throttling enables requests over the kmod concurrent limit to be
processed once a pending request completes.  Only the first item queued up
to wait is woken up.  The assumption here is once a task is woken it will
have no other option to also kick the queue to check if there are more
pending tasks -- regardless of whether or not it was successful.

By throttling and processing only max kmod concurrent tasks we ensure we
avoid unexpected fatal request_module() calls, and we keep memory
consumption on module loading to a minimum.

With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run
time to run both tests:

time ./kmod.sh -t 0008
real    0m16.366s
user    0m0.883s
sys     0m8.916s

time ./kmod.sh -t 0009
real    0m50.803s
user    0m0.791s
sys     0m9.852s

Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: NPetr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 73ce0511 ("kernel/watchdog.c: move hardlockup
detector to separate file"), 'NMI watchdog' is inappropriate in
kernel/watchdog.c, using 'watchdog' only.

Link: http://lkml.kernel.org/r/1499928642-48983-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Cc: Babu Moger <babu.moger@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the ascii-armor canary to prevent unterminated C string overflows
from being able to successfully overwrite the canary, even if they
somehow obtain the canary value.

Inspired by execshield ascii-armor and Daniel Micay's linux-hardened
tree.

Link: http://lkml.kernel.org/r/20170524155751.424-3-riel@redhat.comSigned-off-by: NRik van Riel <riel@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Defining kexec_purgatory as a zero-length char array upsets compile time
size checking.  Since this is built on a per-arch basis, define it as an
unsized char array (like is done for other similar things, e.g.  linker
sections).  This silences the warning generated by the future
CONFIG_FORTIFY_SOURCE, which did not like the memcmp() of a "0 byte"
array.  This drops the __weak and uses an extern instead, since both
users define kexec_purgatory.

Link: http://lkml.kernel.org/r/1497903987-21002-4-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After reconfiguring watchdog sysctls etc., architecture specific
watchdogs may not get all their parameters updated.

watchdog_nmi_reconfigure() can be implemented to pull the new values in
and set the arch NMI watchdog.

[npiggin@gmail.com: add code comments]
  Link: http://lkml.kernel.org/r/20170617125933.774d3858@roar.ozlabs.ibm.com
[arnd@arndb.de: hide unused function]
  Link: http://lkml.kernel.org/r/20170620204854.966601-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170616065715.18390-5-npiggin@gmail.comSigned-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split
HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR.

LOCKUP_DETECTOR implies the general boot, sysctl, and programming
interfaces for the lockup detectors.

An architecture that wants to use a hard lockup detector must define
HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH.

Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the
minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and
does not implement the LOCKUP_DETECTOR interfaces.

sparc is unusual in that it has started to implement some of the
interfaces, but not fully yet.  It should probably be converted to a full
HAVE_HARDLOCKUP_DETECTOR_ARCH.

[npiggin@gmail.com: fix]
  Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com
Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.comSigned-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Reviewed-by: NBabu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For architectures that define HAVE_NMI_WATCHDOG, instead of having them
provide the complete touch_nmi_watchdog() function, just have them
provide arch_touch_nmi_watchdog().

This gives the generic code more flexibility in implementing this
function, and arch implementations don't miss out on touching the
softlockup watchdog or other generic details.

Link: http://lkml.kernel.org/r/20170616065715.18390-3-npiggin@gmail.comSigned-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Reviewed-by: NBabu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:

 "Write to this file of integer N makes N-th call in the current task
  fail (N is 0-based). Read from this file returns a single char 'Y' or
  'N' that says if the fault setup with a previous write to this file
  was injected or not, and disables the fault if it wasn't yet injected.
  Note that this file enables all types of faults (slab, futex, etc).
  This setting takes precedence over all other generic settings like
  probability, interval, times, etc. But per-capability settings (e.g.
  fail_futex/ignore-private) take precedence over it. This feature is
  intended for systematic testing of faults in a single system call. See
  an example below"

Why add a new setting:
1. Existing settings are global rather than per-task.
   So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
   which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
   of all of probability, interval, times, space, task-filter and
   unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
   types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
   stress testing better be done from an unprivileged user.
   Similarly, this would require opening the debugfs files to the
   unprivileged user, as he would need to reopen at least times file
   (not possible to pre-open before dropping privs).

The proposed interface solves all of the above (see the example).

We want to integrate this into syzkaller fuzzer.  A prototype has found
10 bugs in kernel in first day of usage:

  https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance

I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned.  So I am fine with the current
version of the code.

[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With current epoll architecture target files are addressed with
file_struct and file descriptor number, where the last is not unique.
Moreover files can be transferred from another process via unix socket,
added into queue and closed then so we won't find this descriptor in the
task fdinfo list.

Thus to checkpoint and restore such processes CRIU needs to find out
where exactly the target file is present to add it into epoll queue.
For this sake one can use kcmp call where some particular target file
from the queue is compared with arbitrary file passed as an argument.

Because epoll target files can have same file descriptor number but
different file_struct a caller should explicitly specify the offset
within.

To test if some particular file is matching entry inside epoll one have
to

 - fill kcmp_epoll_slot structure with epoll file descriptor,
   target file number and target file offset (in case if only
   one target is present then it should be 0)

 - call kcmp as kcmp(pid1, pid2, KCMP_EPOLL_TFD, fd, &kcmp_epoll_slot)
    - the kernel fetch file pointer matching file descriptor @fd of pid1
    - lookups for file struct in epoll queue of pid2 and returns traditional
      0,1,2 result for sorting purpose

Link: http://lkml.kernel.org/r/20170424154423.511592110@gmail.comSigned-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NAndrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prevent use of uninitialized memory (originating from the stack frame of
do_sysctl()) by verifying that the name array is filled with sufficient
input data before comparing its specific entries with integer constants.

Through timing measurement or analyzing the kernel debug logs, a
user-mode program could potentially infer the results of comparisons
against the uninitialized memory, and acquire some (very limited)
information about the state of the kernel stack.  The change also
eliminates possible future warnings by tools such as KMSAN and other
code checkers / instrumentations.

Link: http://lkml.kernel.org/r/20170524122139.21333-1-mjurczyk@google.comSigned-off-by: NMateusz Jurczyk <mjurczyk@google.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To keep parity with regular int interfaces provide the an unsigned int
proc_douintvec_minmax() which allows you to specify a range of allowed
valid numbers.

Adding proc_douintvec_minmax_sysadmin() is easy but we can wait for an
actual user for that.

Link: http://lkml.kernel.org/r/20170519033554.18592-6-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit e7d316a0 ("sysctl: handle error writing UINT_MAX to u32
fields") added proc_douintvec() to start help adding support for
unsigned int, this however was only half the work needed.  Two fixes
have come in since then for the following issues:

  o Printing the values shows a negative value, this happens since
    do_proc_dointvec() and this uses proc_put_long()

This was fixed by commit 5380e564 ("sysctl: don't print negative
flag for proc_douintvec").

  o We can easily wrap around the int values: UINT_MAX is 4294967295, if
    we echo in 4294967295 + 1 we end up with 0, using 4294967295 + 2 we
    end up with 1.
  o We echo negative values in and they are accepted

This was fixed by commit 425fffd8 ("sysctl: report EINVAL if value
is larger than UINT_MAX for proc_douintvec").

It still also failed to be added to sysctl_check_table()...  instead of
adding it with the current implementation just provide a proper and
simplified unsigned int support without any array unsigned int support
with no negative support at all.

Historically sysctl proc helpers have supported arrays, due to the
complexity this adds though we've taken a step back to evaluate array
users to determine if its worth upkeeping for unsigned int.  An
evaluation using Coccinelle has been done to perform a grammatical
search to ask ourselves:

  o How many sysctl proc_dointvec() (int) users exist which likely
    should be moved over to proc_douintvec() (unsigned int) ?
	Answer: about 8
	- Of these how many are array users ?
		Answer: Probably only 1
  o How many sysctl array users exist ?
	Answer: about 12

This last question gives us an idea just how popular arrays: they are not.
Array support should probably just be kept for strings.

The identified uint ports are:

  drivers/infiniband/core/ucma.c - max_backlog
  drivers/infiniband/core/iwcm.c - default_backlog
  net/core/sysctl_net_core.c - rps_sock_flow_sysctl()
  net/netfilter/nf_conntrack_timestamp.c - nf_conntrack_timestamp -- bool
  net/netfilter/nf_conntrack_acct.c nf_conntrack_acct -- bool
  net/netfilter/nf_conntrack_ecache.c - nf_conntrack_events -- bool
  net/netfilter/nf_conntrack_helper.c - nf_conntrack_helper -- bool
  net/phonet/sysctl.c proc_local_port_range()

The only possible array users is proc_local_port_range() but it does not
seem worth it to add array support just for this given the range support
works just as well.  Unsigned int support should be desirable more for
when you *need* more than INT_MAX or using int min/max support then does
not suffice for your ranges.

If you forget and by mistake happen to register an unsigned int proc
entry with an array, the driver will fail and you will get something as
follows:

sysctl table check failed: debug/test_sysctl//uint_0002 array now allowed
CPU: 2 PID: 1342 Comm: modprobe Tainted: G        W   E <etc>
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS <etc>
Call Trace:
 dump_stack+0x63/0x81
 __register_sysctl_table+0x350/0x650
 ? kmem_cache_alloc_trace+0x107/0x240
 __register_sysctl_paths+0x1b3/0x1e0
 ? 0xffffffffc005f000
 register_sysctl_table+0x1f/0x30
 test_sysctl_init+0x10/0x1000 [test_sysctl]
 do_one_initcall+0x52/0x1a0
 ? kmem_cache_alloc_trace+0x107/0x240
 do_init_module+0x5f/0x200
 load_module+0x1867/0x1bd0
 ? __symbol_put+0x60/0x60
 SYSC_finit_module+0xdf/0x110
 SyS_finit_module+0xe/0x10
 entry_SYSCALL_64_fastpath+0x1e/0xad
RIP: 0033:0x7f042b22d119
<etc>

Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields")
Link: http://lkml.kernel.org/r/20170519033554.18592-5-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Liping Zhang <zlpnobody@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The mode sysctl_writes_strict positional checks keep being copy and pasted
as we add new proc handlers.  Just add a helper to avoid code duplication.

Link: http://lkml.kernel.org/r/20170519033554.18592-4-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: NKees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Document the different sysctl_writes_strict modes in code.

Link: http://lkml.kernel.org/r/20170519033554.18592-3-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently vmcoreinfo data is updated at boot time subsys_initcall(), it
has the risk of being modified by some wrong code during system is
running.

As a result, vmcore dumped may contain the wrong vmcoreinfo.  Later on,
when using "crash", "makedumpfile", etc utility to parse this vmcore, we
probably will get "Segmentation fault" or other unexpected errors.

E.g.  1) wrong code overwrites vmcoreinfo_data; 2) further crashes the
system; 3) trigger kdump, then we obviously will fail to recognize the
crash context correctly due to the corrupted vmcoreinfo.

Now except for vmcoreinfo, all the crash data is well
protected(including the cpu note which is fully updated in the crash
path, thus its correctness is guaranteed).  Given that vmcoreinfo data
is a large chunk prepared for kdump, we better protect it as well.

To solve this, we relocate and copy vmcoreinfo_data to the crash memory
when kdump is loading via kexec syscalls.  Because the whole crash
memory will be protected by existing arch_kexec_protect_crashkres()
mechanism, we naturally protect vmcoreinfo_data from write(even read)
access under kernel direct mapping after kdump is loaded.

Since kdump is usually loaded at the very early stage after boot, we can
trust the correctness of the vmcoreinfo data copied.

On the other hand, we still need to operate the vmcoreinfo safe copy
when crash happens to generate vmcoreinfo_note again, we rely on vmap()
to map out a new kernel virtual address and update to use this new one
instead in the following crash_save_vmcoreinfo().

BTW, we do not touch vmcoreinfo_note, because it will be fully updated
using the protected vmcoreinfo_data after crash which is surely correct
just like the cpu crash note.

Link: http://lkml.kernel.org/r/1493281021-20737-3-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com>
Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vmcoreinfo_max_size stands for the vmcoreinfo_data, the correct one we
should use is vmcoreinfo_note whose total size is VMCOREINFO_NOTE_SIZE.

Like explained in commit 77019967 ("kdump: fix exported size of
vmcoreinfo note"), it should not affect the actual function, but we
better fix it, also this change should be safe and backward compatible.

After this, we can get rid of variable vmcoreinfo_max_size, let's use
the corresponding macros directly, fewer variables means more safety for
vmcoreinfo operation.

[xlpang@redhat.com: fix build warning]
  Link: http://lkml.kernel.org/r/1494830606-27736-1-git-send-email-xlpang@redhat.com
Link: http://lkml.kernel.org/r/1493281021-20737-2-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com>
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: NDave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As Eric said,
 "what we need to do is move the variable vmcoreinfo_note out of the
  kernel's .bss section. And modify the code to regenerate and keep this
  information in something like the control page.

  Definitely something like this needs a page all to itself, and ideally
  far away from any other kernel data structures. I clearly was not
  watching closely the data someone decided to keep this silly thing in
  the kernel's .bss section."

This patch allocates extra pages for these vmcoreinfo_XXX variables, one
advantage is that it enhances some safety of vmcoreinfo, because
vmcoreinfo now is kept far away from other kernel data structures.

Link: http://lkml.kernel.org/r/1493281021-20737-1-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com>
Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Suggested-by: NEric Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The reason to disable interrupts seems to be to avoid switching to a
different processor while handling per cpu data using individual loads and
stores.  If we use per cpu RMV primitives we will not have to disable
interrupts.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705171055130.5898@east.gentwo.orgSigned-off-by: NChristoph Lameter <cl@linux.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reported-and-tested-by: NMeelis Roos <mroos@linux.ee>
Fixes: commit d9e968cb "getrlimit()/setrlimit(): move compat to native"
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My static checker complains that if "func" is NULL then "clear_filter"
is uninitialized.  This seems like it could be true, although it's
possible something subtle is happening that I haven't seen.

    kernel/trace/ftrace.c:3844 match_records()
    error: uninitialized symbol 'clear_filter'.

Link: http://lkml.kernel.org/r/20170712073556.h6tkpjcdzjaozozs@mwanda

Cc: stable@vger.kernel.org
Fixes: f0a3b154 ("ftrace: Clarify code for mod command")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

"func" can't be NULL and it doesn't make sense to check because we've
already derefenced it.

Link: http://lkml.kernel.org/r/20170712073340.4enzeojeoupuds5a@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

With a shared policy in place, when one of the CPUs in the policy is
hotplugged out and then brought back online, sugov_stop() and
sugov_start() are called in order.

sugov_stop() removes utilization hooks for each CPU in the policy and
does nothing else in the for_each_cpu() loop. sugov_start() on the
other hand iterates through the CPUs in the policy and re-initializes
the per-cpu structure _and_ adds the utilization hook.  This implies
that the scheduler is allowed to invoke a CPU's utilization update
hook when the rest of the per-cpu structures have yet to be
re-inited.

Apart from some strange values in tracepoints this doesn't cause a
problem, but if we do end up accessing a pointer from the per-cpu
sugov_cpu structure somewhere in the sugov_update_shared() path,
we will likely see crashes since the memset for another CPU in the
policy is free to race with sugov_update_shared from the CPU that is
ready to go.  So let's fix this now to first init all per-cpu
structures, and then add the per-cpu utilization update hooks all at
once.
Signed-off-by: NVikram Mulukutla <markivx@codeaurora.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When modules are disabled, we get a harmless build warning:

kernel/trace/ftrace.c:4051:13: error: 'process_cached_mods' defined but not used [-Werror=unused-function]

This adds the same #ifdef around the new code that exists around
its caller.

Link: http://lkml.kernel.org/r/20170710084413.1820568-1-arnd@arndb.de

Fixes: d7fbf8df ("ftrace: Implement cached modules tracing on module load")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The "stack_trace_filter" file only makes sense if DYNAMIC_FTRACE is
configured in. If it is not, then the user can not filter any functions.

Not only that, the open function causes warnings when DYNAMIC_FTRACE is not
set.

Link: http://lkml.kernel.org/r/20170710110521.600806-1-arnd@arndb.deReported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The addition of TGID to the tracing header added a check to see if TGID
shoudl be displayed or not, and updated the header accordingly.
Unfortunately, it broke the default header.

Also add constant strings to use for spacing. This does remove the
visibility of the header a bit, but cuts it down from the extended lines
much greater than 80 characters.

Before this change:

 # tracer: function
 #
 #                            _-----=> irqs-off
 #                           / _----=> need-resched
 #                          | / _---=> hardirq/softirq
 #                          || / _--=> preempt-depth
 #                          ||| /     delay
 #           TASK-PID   CPU#||||    TIMESTAMP  FUNCTION
 #              | |       | ||||       |         |
        swapper/0-1     [000] ....     0.277830: migration_init <-do_one_initcall
        swapper/0-1     [002] d...    13.861967: Unknown type 1201
        swapper/0-1     [002] d..1    13.861970: Unknown type 1202

After this change:

 # tracer: function
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
        swapper/0-1     [000] ....     0.278245: migration_init <-do_one_initcall
        swapper/0-1     [003] d...    13.861189: Unknown type 1201
        swapper/0-1     [003] d..1    13.861192: Unknown type 1202

Cc: Joel Fernandes <joelaf@google.com>
Fixes: 441dae8f ("tracing: Add support for display of tgid in trace output")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

kernel/locking/qspinlock.c makes use of prefetchw() but hasn't included
linux/prefetch.h up until now, instead relying upon indirect inclusion
of some header that defines prefetchw().

In the case of MIPS we generally obtain a definition of prefetchw() from
asm/processor.h, included by way of linux/mutex.h, but only for
configurations which select CONFIG_CPU_HAS_PREFETCH. For configurations
which don't this leaves prefetchw() undefined leading to the following
build failure:

  CC      kernel/locking/qspinlock.o
  kernel/locking/qspinlock.c: In function ‘queued_spin_lock_slowpath’:
  kernel/locking/qspinlock.c:549:4: error: implicit declaration of
      function ‘prefetchw’ [-Werror=implicit-function-declaration]
    prefetchw(next);
    ^~~~~~~~~

Fix this by including linux/prefetch.h in order to ensure that we get a
definition of prefetchw().
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

wait4(-2147483648, 0x20, 0, 0xdd0000) triggers:
UBSAN: Undefined behaviour in kernel/exit.c:1651:9

The related calltrace is as follows:

  negation of -2147483648 cannot be represented in type 'int':
  CPU: 9 PID: 16482 Comm: zj Tainted: G    B          ---- -------   3.10.0-327.53.58.71.x86_64+ #66
  Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA              , BIOS CTSAV036 04/27/2011
  Call Trace:
    dump_stack+0x19/0x1b
    ubsan_epilogue+0xd/0x50
    __ubsan_handle_negate_overflow+0x109/0x14e
    SyS_wait4+0x1cb/0x1e0
    system_call_fastpath+0x16/0x1b

Exclude the overflow to avoid the UBSAN warning.

Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Nzhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When running kill(72057458746458112, 0) in userspace I hit the following
issue.

  UBSAN: Undefined behaviour in kernel/signal.c:1462:11
  negation of -2147483648 cannot be represented in type 'int':
  CPU: 226 PID: 9849 Comm: test Tainted: G    B          ---- -------   3.10.0-327.53.58.70.x86_64_ubsan+ #116
  Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014
  Call Trace:
    dump_stack+0x19/0x1b
    ubsan_epilogue+0xd/0x50
    __ubsan_handle_negate_overflow+0x109/0x14e
    SYSC_kill+0x43e/0x4d0
    SyS_kill+0xe/0x10
    system_call_fastpath+0x16/0x1b

Add code to avoid the UBSAN detection.

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Nzhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[thomas@m3y3r.de: v3: fix arch specific implementations]
  Link: http://lkml.kernel.org/r/1497890858.12931.7.camel@m3y3r.deSigned-off-by: NThomas Meyer <thomas@m3y3r.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'all_var' looks like a variable, but is actually a macro.  Use
IS_ENABLED(CONFIG_KALLSYMS_ALL) for clarification.

Link: http://lkml.kernel.org/r/1497577591-3434-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

setgroups is not exactly a hot path, so we might as well use the library
function instead of open-coding the sorting.  Saves ~150 bytes.

Link: http://lkml.kernel.org/r/1497301378-22739-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

attribute_groups are not supposed to change at runtime.  All functions
working with attribute_groups provided by <linux/sysfs.h> work with
const attribute_group.  So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   1120	    544	     16	   1680	    690	kernel/ksysfs.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   1160	    480	     16	   1656	    678	kernel/ksysfs.o

Link: http://lkml.kernel.org/r/aa224b3cc923fdbb3edd0c41b2c639c85408c9e8.1498737347.git.arvind.yadav.cs@gmail.comSigned-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PR_SET_THP_DISABLE has a rather subtle semantic.  It doesn't affect any
existing mapping because it only updated mm->def_flags which is a
template for new mappings.

The mappings created after prctl(PR_SET_THP_DISABLE) have VM_NOHUGEPAGE
flag set.  This can be quite surprising for all those applications which
do not do prctl(); fork() & exec() and want to control their own THP
behavior.

Another usecase when the immediate semantic of the prctl might be useful
is a combination of pre- and post-copy migration of containers with
CRIU.  In this case CRIU populates a part of a memory region with data
that was saved during the pre-copy stage.  Afterwards, the region is
registered with userfaultfd and CRIU expects to get page faults for the
parts of the region that were not yet populated.  However, khugepaged
collapses the pages and the expected page faults do not occur.

In more general case, the prctl(PR_SET_THP_DISABLE) could be used as a
temporary mechanism for enabling/disabling THP process wide.

Implementation wise, a new MMF_DISABLE_THP flag is added.  This flag is
tested when decision whether to use huge pages is taken either during
page fault of at the time of THP collapse.

It should be noted, that the new implementation makes PR_SET_THP_DISABLE
master override to any per-VMA setting, which was not the case
previously.

Fixes: a0715cc2 ("mm, thp: add VM_INIT_DEF_MASK and PRCTL_THP_DISABLE")
Link: http://lkml.kernel.org/r/1496415802-30944-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When we derive event names, convert some expected symbols (such as ':'
used to specify module:name and '.' present in some symbols) into
underscores so that the event name is not rejected.

Before this patch:
    # echo 'p kobject_example:foo_store' > kprobe_events
    trace_kprobe: Failed to allocate trace_probe.(-22)
    -sh: write error: Invalid argument

After this patch:
    # echo 'p kobject_example:foo_store' > kprobe_events
    # cat kprobe_events
    p:kprobes/p_kobject_example_foo_store_0 kobject_example:foo_store

Link: http://lkml.kernel.org/r/66c189e09e71361aba91dd4a5bd146a1b62a7a51.1499453040.git.naveen.n.rao@linux.vnet.ibm.comAcked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

We lose the distinction between "found a PID" and "nothing, but that's not
an error" a bit too early in waitid().  Easily fixed, fortunately...
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Fixes: 67d7ddde ("waitid(2): leave copyout of siginfo to syscall itself")
Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Similar to commit 90ec5e89 ("kretprobes: Ensure probe location is
at function entry"), ensure that the jprobe probepoint is at function
entry.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a4525af6c5a42df385efa31251246cf7cca73598.1499443367.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>