Now we also check if can push skb userspace just after receive a new
skb instead of only wait the l2cap_busy_work wake up from time to time
to check the local busy condition.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

backlog queue is the canonical mechanism to avoid race conditions due
interrupts in bottom half context. After the socket lock is released the
net core take care of push all skb in its backlog queue.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Using a lock to deal with the ERTM race condition - interruption with
new data from the hci layer - is wrong. We should use the native skb
backlog queue.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If such event happens we shall reply with a Command Reject, because we are
not expecting any configure request.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When mode is mandatory we shall not send connect request and report this
to the userspace as well.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Since now we have checks for the supported mode before on
l2cap_info_rsp we can remove the check for it here.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If our mode is Basic Mode we have to refuse any ConfigRsp that proposes
a different mode.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Profile Tuning Suite requires that we send a RFC containing the
Basic Mode configuration when requesting Basic Mode.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If we choose to use Basic Mode then we have to refuse the received mode
and propose Basic Mode again.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If the device is a STATE 2 then it should disconnect the channel if the
remote device propose a mode different from its mandatory mode.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If the socket type is SOCK_STREAM we set Enhanced Retransmisson Mode or
Streaming Mode as mandatory. That means that we will close the channel
if the other side doesn't support or request the the mandatory mode.
Basic mode can't be set as mandatory.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

l2cap_send_sframe() already set the F-bit if we set L2CAP_CONN_SEND_FBIT
and unset L2CAP_CONN_SEND_FBIT after send the F-bit.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use the dynamic debug to output info about ERTM protocol stuff.
The following script can be used to enable debug for ERTM:

DEBUGFS="/sys/kernel/debug/dynamic_debug/control"

echo -n 'func l2cap_send_disconn_req +p' > $DEBUGFS
echo -n 'func l2cap_monitor_timeout +p' > $DEBUGFS
echo -n 'func l2cap_retrans_timeout +p' > $DEBUGFS
echo -n 'func l2cap_busy_work  +p' > $DEBUGFS
echo -n 'func l2cap_push_rx_skb +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_iframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_rrframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_rejframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_srejframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_rnrframe +p' > $DEBUGFS
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If any error occurs during transfers we have to tell userspace that
something wrong happened.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Bluetooth SIG Profile Tuning Suite Software uses the CSA1 spec
to run the L2CAP tests. The new 3.0 spec has a missing
Retransmit-I-Frames action when the Remote side is Busy.
We still start the retransmission timer if Remote is Busy and unacked
frames > 0. We do everything we did before this change plus the
Retransmission of I-frames.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This way, if FCS is enabled and the packet is corrupted, we just drop it
without read it len, which could be corrupted.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We have to check if the proposed tx_window value is not greater that
maximum value supported.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

ERTM spec mandates that after receive a P-bit we shall send an F-bit in
response. This patch fixes this for retransmitted packets, on
retransmitting we were missing to check for a pending F-bit to be sent.
Also we were missing some annotation to send a F-bit.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Updating buffer_seq first make us able to ack the last I-frame received.
This is also a requirement of the  Profile Tuning Suite software.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The ack_timer is implemation specific, disabling it in such situation
avoids some potencial errors in the ERTM protocol.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use kzalloc rather than the combination of kmalloc and memset.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,size,flags;
statement S;
@@

-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
 if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When driver is sending a command or data and the firmware is also
sending a sleep event, sometimes it is observed that driver will
continue to send the command/data to firmware right after processing
sleep event. Once sleep event is processed driver is not supposed to
send anything because firmware is in sleep state after that. Previously
interrupt processing was done in SDIO interrupt callback handler.
Now it is done in btmrvl driver main thread to solve the
cross-sending properly.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Qualcomm, Inc. has reassigned rights to Code Aurora Forum. Accordingly,
as files are modified by Code Aurora Forum members, the copyright
statement will be updated.
Signed-off-by: NRon Shaffer <rshaffer@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Deleted extraneous white space from the end of several lines
Signed-off-by: NRon Shaffer <rshaffer@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The patch below fixes a warning message when using gcc 4.6.0.

  CC [M]  drivers/bluetooth/hci_ldisc.o
drivers/bluetooth/hci_ldisc.c: In function 'hci_uart_send_frame':
drivers/bluetooth/hci_ldisc.c:213:21: warning: variable 'tty' set but not used
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Reviewed-By: NGustavo F. Padovan <gustavo@padovan.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Clone checking of ret to simplify the code.

This patch silences a compiler warning:
drivers/bluetooth/btmrvl_sdio.c: In function ‘btmrvl_sdio_verify_fw_download’:
drivers/bluetooth/btmrvl_sdio.c:80: warning: ‘fws1’ may be used uninitialized in this function
drivers/bluetooth/btmrvl_sdio.c:80: note: ‘fws1’ was declared here
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Reviewed-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a debugfs blacklist entry for each HCI device which can
be used to list the current content of the blacklist.
Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In some circumstances it could be desirable to reject incoming
connections on the baseband level. This patch adds this feature through
two new ioctl's: HCIBLOCKADDR and HCIUNBLOCKADDR. Both take a simple
Bluetooth address as a parameter. BDADDR_ANY can be used with
HCIUNBLOCKADDR to remove all devices from the blacklist.
Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When resending an I-frame, ERTM was reusing the control bits from the last
time it was sent, that was causing a corruption in the new control field
due to it dirty fields.

This patches extracts only the SAR bits from the old field and reuse it to
resend the packet, the others bits should be reset and receive the
updated value.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Fix a crash regarding the Monitor Timeout, it was running even after the
shutdown of the ACL connection, which doesn't make sense.

The same code also fixes another issue, before this patch L2CAP was sending
many Disconnections Requests while we have to send only one.

The issues are related to each other, a expired Monitor Timeout can
trigger a Disconnection Request and then we may have a crash if the link
was already deleted.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

ERTM and streaming mode L2CAP sockets have no minimum packet length. Only
basic mode connections have minimum length.

Instead, validate the packet containing all necessary control, FCS,
and SAR fields.

The patch fixes the drop of valid packets with length lower than 4.
Signed-off-by: NNathan Holstein <ngh@isomerica.net>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Since all TxSeq values are modulo, we shall not compare them directly. We
have to compare their offset inside the TxWindow instead.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch makes l2cap_ertm_send() similar to the Send-Data action of
the ERTM spec. We shall not check for RemoteBusy or WAIT_F state
inside l2cap_ertm_send().

Such checks were causing a bug in the retransmission logic of ERTM and
making ERTM stalls until the ACL is dropped.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The SAR bits doesn't make sense for an S-frame. It doesn't use SAR.

Checking SAR for a S-frames can lead to L2CAP errors, it could close
the channel with an invalid packet length, since we was removing the 2
of the of any frame that match SAR start bits, without check if it is
an I-frame.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

All ERTM operations regarding the txWindow should be modulo 64,
otherwise we confuse the ERTM logic and connections will break.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We shall not use an unsigned var since we are expecting negatives value
there. Using unsigned causes ERTM connection to close due to invalid
ReqSeq numbers.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This reverts commit 84fb0a63 which adds
the L2CAP Extended Features to the Kconfig, that is actually not needed.
One can use other mechanisms to enable L2CAP Extended Features.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We don't need these parameters anymore since we have socket options for
them.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Conflicts:
	drivers/vhost/net.c
	net/bridge/br_device.c

Fix merge conflict in drivers/vhost/net.c with guidance from
Stephen Rothwell.

Revert the effects of net-2.6 commit 573201f3
since net-next-2.6 has fixes that make bridge netpoll work properly thus
we don't need it disabled.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>