In case !CONFIG_ACPI_NUMA and !CONFIG_AMD_NUMA gcc emits a warning
about the unused variable ret.

As that variable is in fact not needed I choose to remove it.
Signed-off-by: NFlorian Mickler <florian@mickler.org>
LKML-Reference: <1301843624-22364-1-git-send-email-florian@mickler.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

* Remove bogus dependency on ARCH_SELECT_MEMORY_MODEL from
  ARCH_FLATMEM_ENABLE.  ENABLE configs don't interfere with
  SELECT_MEMORY_MODEL.  They just need to indicate whether the
  specific memory model is supported.

* Relocate HAVE_ARCH_ALLOC_REMAP, ARCH_PROC_KCORE_TEXT and
  ARCH_SPARSEMEM_DEFAULT so that memory model related configs are
  together in consistent order.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>

phys_to_nid() maps physical address to NUMA node id.  This is
implemented by building perfect hash in compute_hash_shift() during
initialization.

However, with SPARSE memory model, the nid is encoded in page flags.
The perfect hash implementation was for DISCONTIG memory model which
got removed years ago by b263295d (x86: 64-bit, make sparsemem
vmemmap the only memory model).

So, the perfect hash ends up being used only during initialization
when the core SPARSE code already provides perfectly acceptable
generic early_pfn_to_nid() implementation.

Drop phys_to_nid() and use the generic ealry_pfn_to_nid() instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>

With the this_cpu_xx we no longer need to pass an acpi
structure to the msr management code. Simplifies code and improves
performance.

NOTE: This code is x86 specific (see #ifdef CONFIG_X86) but not under
      arch/x86.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

It is more effective to use a segment prefix instead of calculating the
address of the current cpu area amd then testing flags.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

Add this_cpu_has() which determines if the current cpu has a certain
ability using a segment prefix and a bit test operation.

For that we need to add bit operations to x86s percpu.h.

Many uses of cpu_has use a pointer passed to a function to determine
the current flags. That is no longer necessary after this patch.

However, this patch only converts the straightforward cases where
cpu_has is used with this_cpu_ptr. The rest is work for later.

-tj: Rolled up patch to add x86_ prefix and use percpu_read() instead
     of percpu_read_stable().
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

We incorrectly returned -EINVAL when none of the devices in the array
had an integrity profile.  This in turn prevented mdadm from starting
the metadevice.  Fix this so we only return errors on mismatched
profiles and memory allocation failures.
Reported-by: NGiacomo Catenazzi <cate@cateee.net>
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: Fix regression for Xorg

MFD changes in 4ec1b54c ('mfd: mfd_cell is now implicitly available to
mc13xxx drivers') changed the mc13xxx_platform_data struct layout.

At the time all users were changed, but this driver was introduced in
another tree at the same time.  This updates the mc13xxx_platform_data
user, fixing a build error.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branches 'irq-cleanup-for-linus' and 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  vlynq: Convert irq functions

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq; Fix cleanup fallout
  genirq: Fix typo and remove unused variable
  genirq: Fix new kernel-doc warnings
  genirq: Add setter for AFFINITY_SET in irq_data state
  genirq: Provide setter inline for IRQD_IRQ_INPROGRESS
  genirq: Remove handle_IRQ_event
  arm: Ns9xxx: Remove private irq flow handler
  powerpc: cell: Use the core flow handler
  genirq: Provide edge_eoi flow handler
  genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data
  genirq: Split irq_set_affinity() so it can be called with lock held.
  genirq: Add chip flag for restricting cpu_on/offline calls
  genirq: Add chip hooks for taking CPUs on/off line.
  genirq: Add irq disabled flag to irq_data state
  genirq: Reserve the irq when calling irq_set_chip()

I missed the CONFIG_GENERIC_PENDING_IRQ dependency in the affinity
related functions and the IRQ_LEVEL propagation into irq_data
state. Did not pop up on my main test platforms. :(
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NDavid Daney <ddaney@caviumnetworks.com>

Commit 6f5317e7 introduced a bug in the
handling of userspace object classes that is causing breakage for Xorg
when XSELinux is enabled.  Fix the bug by changing map_class() to return
SECCLASS_NULL when the class cannot be mapped to a kernel object class.
Reported-by: N"Justin P. Mattock" <justinmattock@gmail.com>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Fixes this build error:

  drivers/memstick/host/r592.c:26: error: 'enable_dma' redeclared as different kind of symbol
  arch/powerpc/include/asm/dma.h:189: note: previous definition of 'enable_dma' was here
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Alex Dubov <oakad@yahoo.com>
Acked-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: stop using the page cache to back the buffer cache
  xfs: register the inode cache shrinker before quotachecks
  xfs: xfs_trans_read_buf() should return an error on failure
  xfs: introduce inode cluster buffer trylocks for xfs_iflush
  vmap: flush vmap aliases when mapping fails
  xfs: preallocation transactions do not need to be synchronous

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_buf.c due to plug removal.

Commit da48524e ("Prevent rt_sigqueueinfo and rt_tgsigqueueinfo
from spoofing the signal code") made the check on si_code too strict.
There are several legitimate places where glibc wants to queue a
negative si_code different from SI_QUEUE:

 - This was first noticed with glibc's aio implementation, which wants
   to queue a signal with si_code SI_ASYNCIO; the current kernel
   causes glibc's tst-aio4 test to fail because rt_sigqueueinfo()
   fails with EPERM.

 - Further examination of the glibc source shows that getaddrinfo_a()
   wants to use SI_ASYNCNL (which the kernel does not even define).
   The timer_create() fallback code wants to queue signals with SI_TIMER.

As suggested by Oleg Nesterov <oleg@redhat.com>, loosen the check to
forbid only the problematic SI_TKILL case.
Reported-by: NKlaus Dittrich <kladit@arcor.de>
Acked-by: NJulien Tinnes <jln@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://www.jni.nu/cris:
  Correct auto-restart of syscalls via restartblock
  CRISv10: Fix return before mutex_unlock in pcf8563
  Drop the CRISv32 version of pcf8563

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: write lock requested keys
  eCryptfs: move ecryptfs_find_auth_tok_for_sig() call before mutex_lock
  eCryptfs: verify authentication tokens before their use
  eCryptfs: modified size of keysig in the ecryptfs_key_sig structure
  eCryptfs: removed num_global_auth_toks from ecryptfs_mount_crypt_stat
  eCryptfs: ecryptfs_keyring_auth_tok_for_sig() bug fix
  eCryptfs: Unlock page in write_begin error path
  ecryptfs: modify write path to encrypt page in writepage
  eCryptfs: Remove ECRYPTFS_NEW_FILE crypt stat flag
  eCryptfs: Remove unnecessary grow_file() function

Merge branch 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable

* 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (45 commits)
  Btrfs: fix __btrfs_map_block on 32 bit machines
  btrfs: fix possible deadlock by clearing __GFP_FS flag
  btrfs: check link counter overflow in link(2)
  btrfs: don't mess with i_nlink of unlocked inode in rename()
  Btrfs: check return value of btrfs_alloc_path()
  Btrfs: fix OOPS of empty filesystem after balance
  Btrfs: fix memory leak of empty filesystem after balance
  Btrfs: fix return value of setflags ioctl
  Btrfs: fix uncheck memory allocations
  btrfs: make inode ref log recovery faster
  Btrfs: add btrfs_trim_fs() to handle FITRIM
  Btrfs: adjust btrfs_discard_extent() return errors and trimmed bytes
  Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP
  Btrfs: make update_reserved_bytes() public
  btrfs: return EXDEV when linking from different subvolumes
  Btrfs: Per file/directory controls for COW and compression
  Btrfs: add datacow flag in inode flag
  btrfs: use GFP_NOFS instead of GFP_KERNEL
  Btrfs: check return value of read_tree_block()
  btrfs: properly access unaligned checksum buffer
  ...

Fix up trivial conflicts in fs/btrfs/volumes.c due to plug removal in
the block layer.

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (81 commits)
  xo15-ebook: Remove device.wakeup_count
  ips: use interruptible waits in ips-monitor
  acer-wmi: does not poll device status when WMI event is available
  acer-wmi: does not set persistence state by rfkill_init_sw_state
  platform-drivers: x86: fix common misspellings
  acer-wmi: use pr_<level> for messages
  asus-wmi: potential NULL dereference in show_call()
  asus-wmi: signedness bug in read_brightness()
  platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0
  platform-driver-x86: fix wrong merge for compal-laptop.c
  msi-laptop: use pr_<level> for messages
  Platform: add Samsung Laptop platform driver
  acer-wmi: Fix WMI ID
  acer-wmi: deactive mail led when power off
  msi-laptop: send out touchpad on/off key
  acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE
  platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table
  sony-laptop: potential null dereference
  sony-laptop: handle allocation failures
  sony-laptop: return negative on failure in sony_nc_add()
  ...

Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  mach-ux500: configure board for the TPS61052 regulator v2
  mach-ux500: provide ab8500 init vector
  mach-ux500: board support for AB8500 GPIO driver
  gpio: driver for 42 AB8500 GPIO pins

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: Suspend: Fix dependency of ARCH_SUSPEND_POSSIBLE
  ARM: SAMSUNG: Fix CPU idmask
  ARM: EXYNOS4: Fix addruart macro
  ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKC210
  ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKV310
  ARM: EXYNOS4: Fix build warning on regarding SATA_AHCI_PLATFORM
  ARM: S5PV210: Remove duplicated inclusion
  ARM: S5PV210: Fix security engine interrupt names
  ARM: S5P64X0: Fix iodesc array size for S5P6450

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni-intel - fixed problem with packets that are not multiple of 64bytes

* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score:
  score: Use generic show_interrupts()
  score: Convert to new irq function names
  score: lost a semicolon in asm/irqflags.h
  score: Select GENERIC_HARDIRQS_NO_DEPRECATED
  score: Convert irq_chip to new functions

The acpi video driver attempts to explicitly create a sysfs link between
the acpi device and the associated PCI device. However, we're now also
doing this from the backlight core, which means that we get a backtrace
caused by a duplicate file. Remove the code and leave it up to the
backlight core.
Reported-by: NJeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NAlessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits)
  Treat writes as new when holes span across page boundaries
  fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
  ocfs2/dlm: Move kmalloc() outside the spinlock
  ocfs2: Make the left masklogs compat.
  ocfs2: Remove masklog ML_AIO.
  ocfs2: Remove masklog ML_UPTODATE.
  ocfs2: Remove masklog ML_BH_IO.
  ocfs2: Remove masklog ML_JOURNAL.
  ocfs2: Remove masklog ML_EXPORT.
  ocfs2: Remove masklog ML_DCACHE.
  ocfs2: Remove masklog ML_NAMEI.
  ocfs2: Remove mlog(0) from fs/ocfs2/dir.c
  ocfs2: remove NAMEI from symlink.c
  ocfs2: Remove masklog ML_QUOTA.
  ocfs2: Remove mlog(0) from quota_local.c.
  ocfs2: Remove masklog ML_RESERVATIONS.
  ocfs2: Remove masklog ML_XATTR.
  ocfs2: Remove masklog ML_SUPER.
  ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c
  ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c
  ...

Fix up trivial conflict in fs/ocfs2/super.c

Sigh, I'm overworked.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix new irq-related kernel-doc warnings in 2.6.38:

Warning(kernel/irq/manage.c:149): No description found for parameter 'mask'
Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity'
Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors'
Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Convert to the new irq_chip functions and the new namespace.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NFlorian Fainelli <florian@openwrt.org>
LKML-Reference: <alpine.LFD.2.00.1103252150180.31464@localhost6.localdomain6>

When a hole spans across page boundaries, the next write forces
a read of the block. This could end up reading existing garbage
data from the disk in ocfs2_map_page_blocks. This leads to
non-zero holes. In order to avoid this, mark the writes as new
when the holes span across page boundaries.
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Njlbec <jlbec@evilplan.org>

When CONFIG_DEBUG_FS=y and CONFIG_OCFS2_FS_STATS=n, we get the
following warning:

fs/ocfs2/cluster/tcp.c:213:16: warning: ‘o2net_get_func_run_time’
defined but not used

Since o2net_get_func_run_time is only called from
o2net_update_recv_stats, so move it under CONFIG_OCFS2_FS_STATS.
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Njlbec <jlbec@evilplan.org>

Some archs want to prevent the default affinity being set on their
chips in the reqeust_irq() path.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Special function for demultiplexing handlers which can be disabled via
disable_irq().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Last user gone.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

handle_prio_irq is almost identical with handle_fasteoi_irq. The
subtle differences are

1) The handler checks for IRQ_DISABLED after the device handler has
   been called. In case it's set it masks the interrupt.

2) When the handler sees IRQ_DISABLED on entry it masks the interupt
   in the same way as handle_fastoei_irq, but does not set the
   IRQ_PENDING flag.

3) Instead of gracefully handling a recursive interrupt it crashes the
   kernel.

#1 is just relevant when a device handler calls disable_irq_nosync()
   and it does not matter whether we mask the interrupt right away or
   not. We handle lazy masking for disable_irq anyway, so there is no
   real reason to have this extra mask in place.

#2 will prevent the resend of a pending interrupt, which can result in
   lost interrupts for edge type interrupts. For level type interrupts
   the resend is a noop in the generic code. According to the
   datasheet all interrupts are level type, so marking them as such
   will result in the exact same behaviour as the private
   handle_prio_irq implementation.

#3 is just stupid. Crashing the kernel instead of handling a problem
   gracefully is just wrong. With the current semantics- all handlers
   run with interrupts disabled - this is even more wrong.

Rename ack to eoi, remove the unused mask_ack, switch to
handle_fasteoi_irq and remove the private function.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: NUwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
LKML-Reference: <20110202212552.299898447@linutronix.de>

The core handler is a full equivalent replacement.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This is a replacment for the cell flow handler which is in the way of
cleanups. Must be selected to avoid general bloat.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We really need these flags for some of the interrupt chips. Move it
from internal state to irq_data and provide proper accessors.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Daney <ddaney@caviumnetworks.com>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Ensure that rpc_release_resources_task() can be called twice.
  NFS: Don't leak RPC clients in NFSv4 secinfo negotiation
  NFS: Fix a hang in the writeback path

Stephen ran into the following build error:

  drivers/mfd/cs5535-mfd.c:30:22: error: asm/olpc.h: No such file or directory

olpc.h exists only on x86 (and in the future, ARM).  Rather than
wrapping the include in an #ifdef, just change cs5535-mfd to only build
on x86.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>