- 31 12月, 2008 16 次提交
-
-
由 Eduardo Habkost 提交于
Along with some comments on why it is different from the core cpu_vmxoff() function. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Eduardo Habkost 提交于
It will be used by core code on kdump and reboot, to disable vmx if needed. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Eduardo Habkost 提交于
vmx.h will be used by core code that is independent of KVM, so I am moving it outside the arch/x86/kvm directory. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Guillaume Thouvenin 提交于
If emulate_invalid_guest_state is enabled, the emulator is called when guest state is invalid. Until now, we reported an mmio failure when emulate_instruction() returned EMULATE_DO_MMIO. This patch adds the case where emulate_instruction() failed and an MMIO emulation is needed. Signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Guillaume Thouvenin 提交于
If we call the emulator we shouldn't call skip_emulated_instruction() in the first place, since the emulator already computes the next rip for us. Thus we move ->skip_emulated_instruction() out of kvm_emulate_pio() and into handle_io() (and the svm equivalent). We also replaced "return 0" by "break" in the "do_io:" case because now the shadow register state needs to be committed. Otherwise eip will never be updated. Signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
PCI device assignment would map guest MMIO spaces as separate slot, so it is possible that the device has more than 2 MMIO spaces and overwrite current private memslot. The patch move private memory slot to the top of userspace visible memory slots. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
The effective memory type of EPT is the mixture of MSR_IA32_CR_PAT and memory type field of EPT entry. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
GUEST_PAT support is a new feature introduced by Intel Core i7 architecture. With this, cpu would save/load guest and host PAT automatically, for EPT memory type in guest depends on MSR_IA32_CR_PAT. Also add save/restore for MSR_IA32_CR_PAT. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Older VMX supporting CPUs do not provide the "Virtual NMI" feature for tracking the NMI-blocked state after injecting such events. For now KVM is unable to inject NMIs on those CPUs. Derived from Sheng Yang's suggestion to use the IRQ window notification for detecting the end of NMI handlers, this patch implements virtual NMI support without impact on the host's ability to receive real NMIs. The downside is that the given approach requires some heuristics that can cause NMI nesting in vary rare corner cases. The approach works as follows: - inject NMI and set a software-based NMI-blocked flag - arm the IRQ window start notification whenever an NMI window is requested - if the guest exits due to an opening IRQ window, clear the emulated NMI-blocked flag - if the guest net execution time with NMI-blocked but without an IRQ window exceeds 1 second, force NMI-blocked reset and inject anyway This approach covers most practical scenarios: - succeeding NMIs are seperated by at least one open IRQ window - the guest may spin with IRQs disabled (e.g. due to a bug), but leaving the NMI handler takes much less time than one second - the guest does not rely on strict ordering or timing of NMIs (would be problematic in virtualized environments anyway) Successfully tested with the 'nmi n' monitor command, the kgdbts testsuite on smp guests (additional patches required to add debug register support to kvm) + the kernel's nmi_watchdog=1, and a Siemens- specific board emulation (+ guest) that comes with its own NMI watchdog mechanism. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
This patch adds the required bits to the VMX side for user space injected NMIs. As with the preexisting in-kernel irqchip support, the CPU must provide the "virtual NMI" feature for proper tracking of the NMI blocking state. Based on the original patch by Sheng Yang. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Fix NMI injection in real-mode with the same pattern we perform IRQ injection. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
do_interrupt_requests and vmx_intr_assist go different way for achieving the same: enabling the nmi/irq window start notification. Unify their code over enable_{irq|nmi}_window, get rid of a redundant call to enable_intr_window instead of direct enable_nmi_window invocation and unroll enable_intr_window for both in-kernel and user space irq injection accordingly. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
There are currently two ways in VMX to check if an IRQ or NMI can be injected: - vmx_{nmi|irq}_enabled and - vcpu.arch.{nmi|interrupt}_window_open. Even worse, one test (at the end of vmx_vcpu_run) uses an inconsistent, likely incorrect logic. This patch consolidates and unifies the tests over {nmi|interrupt}_window_open as cache + vmx_update_window_states for updating the cache content. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Properly set GUEST_INTR_STATE_NMI and reset nmi_injected when a task-switch vmexit happened due to a task gate being used for handling NMIs. Also avoid the false warning about valid vectoring info in kvm_handle_exit. Based on original patch by Gleb Natapov. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
irq_window_exits only tracks IRQ window exits due to user space requests, nmi_window_exits include all exits. The latter makes more sense, so let's adjust irq_window_exits accounting. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 23 11月, 2008 1 次提交
-
-
由 Avi Kivity 提交于
If an interrupt cannot be injected for some reason (say, page fault when fetching the IDT descriptor), the interrupt is marked for reinjection. However, if an NMI is queued at this time, the NMI will be injected instead and the NMI will be lost. Fix by deferring the NMI injection until the interrupt has been injected successfully. Analyzed by Jan Kiszka. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 12 11月, 2008 1 次提交
-
-
由 Sheng Yang 提交于
There is a potential issue that, when guest using pagetable without vmexit when EPT enabled, guest would use PAT/PCD/PWT bits to index PAT msr for it's memory, which would be inconsistent with host side and would cause host MCE due to inconsistent cache attribute. The patch set IGMT bit in EPT entry to ignore guest PAT and use WB as default memory type to protect host (notice that all memory mapped by KVM should be WB). Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 15 10月, 2008 22 次提交
-
-
由 Marcelo Tosatti 提交于
Manually disabling EPT via module option fails to re-enable INVLPG exiting. Reported-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
With pages out of sync invlpg needs to be trapped. For now simply nuke the entry. Untested on AMD. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Convert gfn_to_pfn to use get_user_pages_fast, which can do lockless pagetable lookups on x86. Kernel compilation on 4-way guest is 3.7% faster on VMX. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
Commit 1c0f4f5011829dac96347b5f84ba37c2252e1e08 left a useless access of VM_ENTRY_INTR_INFO_FIELD in vmx_intr_assist behind. Clean this up. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
These can help show whether a guest is making progress or not. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This is more emulation friendly, if not 100% correct. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Real mode cs is a data segment, not a code segment. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
This patch modifies mode switching and vmentry function in order to drive invalid guest state emulation. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
This adds the invalid guest state handler function which invokes the x86 emulator until getting the guest to a VMX-friendly state. [avi: leave atomic context if scheduling] [guillaume: return to atomic context correctly] Signed-off-by: NLaurent Vivier <laurent.vivier@bull.net> Signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
The patch adds the module parameter required to enable emulating invalid guest state, as well as the emulation_required flag used to drive emulation whenever needed. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
This patch adds functions to check whether guest state is VMX compliant. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Usually HOST_RSP retains its value across guest entries. Take advantage of this and avoid a vmwrite() when this is so. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
As we execute real mode guests in VM86 mode, exception have to be reinjected appropriately when the guest triggered them. For this purpose the patch adopts the real-mode injection pattern used in vmx_inject_irq to vmx_queue_exception, additionally taking care that the IP is set correctly for #BP exceptions. Furthermore it extends handle_rmode_exception to reinject all those exceptions that can be raised in real mode. This fixes the execution of himem.exe from FreeDOS and also makes its debug.com work properly. Note that guest debugging in real mode is broken now. This has to be fixed by the scheduled debugging infrastructure rework (will be done once base patches for QEMU have been accepted). Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
Since checking for vcpu->arch.rmode.active is already done whenever we call handle_rmode_exception(), checking it inside the function is redundant. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Instead of looking at failed injections in the vm entry path, move processing to the exit path in vmx_complete_interrupts(). This simplifes the logic and removes any state that is hidden in vmx registers. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The vmx code assumes that IDT-Vectoring can only be set when an exception is injected due to the exception in question. That's not true, however: if the exception is injected correctly, and later another exception occurs but its delivery is blocked due to a fault, then we will incorrectly assume the first exception was not delivered. Fix by unconditionally dequeuing the pending exception, and requeuing it (or the second exception) if we see it in the IDT-Vectoring field. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Instead of processing nmi injection failure in the vm entry path, move it to the vm exit path (vm_complete_interrupts()). This separates nmi injection from nmi post-processing, and moves the nmi state from the VT state into vcpu state (new variable nmi_injected specifying an injection in progress). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-