The "cpus" node cannot be inside the "soc" node, while this
works for the CoreSight blocks, the early boot code will look
for "cpus" directly under the root node, so this is a hard
convention. So move the CPU nodes.

Augment the "reg" property to match what is actually in the
hardware: 0x300 and 0x301 respectively.

Then add an SMP enablement type to be used by the SMP init
code, "ste,dbx500-smp".
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

It turns out that only Dell laptops have the separate button bits for
v2 dualpoint sticks and that commit 92bac83d ("Input: alps - non
interleaved V2 dualpoint has separate stick button bits") causes
regressions on Toshiba laptops.

This commit adds a check for Dell laptops to the code for handling these
extra button bits, fixing this regression.

This patch has been tested on a Dell Latitude D620 to make sure that it
does not reintroduce the original problem.
Reported-and-tested-by: NDouglas Christman <douglaschristman@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

SATA_PLL_SOFT_RESET bit of CTRL_CORE_SMA_SW_0 must be toggled
between a SATA DPLL unlock and re-lock to prevent SATA lockup.

Introduce a new DT parameter 'syscon-pllreset' to provide the syscon
regmap access to this register which sits in the control module.

If the register is not provided we fallback to the old behaviour
i.e. SATA DPLL refclk will not be disabled and we prevent SoC low
power states.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>

There is an overlap in dma ring cmd csr region due to sharing of ethernet
ring cmd csr region. This patch fix the resource overlapping by mapping
the entire dma ring cmd csr region.
Signed-off-by: NRameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

pwm attributes have well defined names, which should be used.

Cc: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
Cc: stable@vger.kernel.org #v4.1+
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Fix the clocks property documentation and use lower case for
hex values in the example.
Signed-off-by: NAlban Bedel <albeu@free.fr>
Signed-off-by: NRob Herring <robh@kernel.org>

Fix build breakage and set the protocol identifier based on the parameter.

Fixes: 9ac8928e ("target: simplify the target template registration API")
Fixes: e4aae5af ("target: change core_tpg_register prototype")
Signed-off-by: NSebastian Herbszt <herbszt@gmx.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

It's not supported by driver anymore after using runtime pm
and there's no user of it, so delete it now.
Signed-off-by: NDong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: NJohan Derycke <johan.derycke@barco.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current description for proximity measurement is ambiguous. While
the first part says that proximity is measured by observing
reflectivity, the second part incorrectly infers that reported values
should behave like a distance.

This is because of AS3935 lightning sensor which uses the proximity
API, while not being a true proximity sensor.

Note this is marked for stable as it accompanies a fix in ABI usage
to the sx9500 driver which would otherwise appear to be correct.

Fixes:  614e8842 ("iio: ABI: add clarification for proximity")
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is currently no way to see that the needs_check flag has been set
in the metadata.  Display 'needs_check' in the cache status if it is set
in the cache metadata.

Also, update cache documentation.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

There is currently no way to see that the needs_check flag has been set
in the metadata.  Display 'needs_check' in the thin-pool status if it is
set in the thinp metadata.

Also, update thinp documentation.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The parallel-display driver used an undocumented, non-standard property
"fsl,panel" to optionally associate with a drm_panel device. This patch
fixes the driver to use the same OF graph bindings as the LDB driver
instead:

    parallel-display {
            compatible = "fsl,imx-parallel-display";
            ...

            port@1 {
                    reg = <1>;

                    parallel_out: endpoint {
                            remote_endpoint = <&panel_in>;
                    };
            };
    };

    panel {
            ...

            port {
                    panel_in: endpoint {
                            remote-endpoint = <&parallel_out>;
                    };
            };
    };
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NGary Bisson <gary.bisson@boundarydevices.com>

This replaces the platform_name in snd_soc_dai_link by device tree node.
Signed-off-by: NKoro Chen <koro.chen@mediatek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Hisilicon SMMUv3 devices treat CMD_PREFETCH_CONFIG as a illegal command,
execute it will trigger GERROR interrupt. Although the gerror code manage
to turn the prefetch into a SYNC, and the system can continue to run
normally, but it's ugly to print error information.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
[will: extended binding documentation]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit 712a0dd9 ("Documentation/drm: Update rotation property")
left an extra 'rowspan' for the row omap, which pushed the following qxl
rows columns out to column 8 and broke the tabulation.
Remove the errant rowspan.
Signed-off-by: NGraham Whaley <graham.whaley@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

it was not the whole truth that kernel mode cannot be used with swap on LVM
Signed-off-by: NUwe Geuder <linuxkernel2015-ugeuder@snkmail.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Add node for TI AM4372 EMIF. Without this we get a warning with the
recent commit fabbe6df (ARM: OMAP: AM43xx hwmod: Add data for am43xx
emif hwmod).
Signed-off-by: NDave Gerlach <d-gerlach@ti.com>
Tested-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Since commit a1c48bb1 (Makefile: Fix unrecognized cross-compiler command
line options), the arch Makefile is included earlier by the main
Makefile, preventing the arc architecture to set its -O3 compiler
option. Since there might be more use cases for an arch Makefile to
fine-tune the options, add support for ARCH_CPPFLAGS, ARCH_AFLAGS and
ARCH_CFLAGS variables that are appended to the respective kbuild
variables. The user still has the final say via the KCPPFLAGS, KAFLAGS
and KCFLAGS variables.
Reported-by: NVineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: NMichal Marek <mmarek@suse.com>

Add machine support for the Allwinner A33 quad core cortex-a7 based SoC,
which is similar to the A23 SoC.
Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: NChen-Yu Tsai <wens@csie.org>

The Allwinner H3 is a quad-core Cortex-A7-based SoC. It is very similar
to other sun8i family SoCs like the A23.
Signed-off-by: NJens Kuske <jenskuske@gmail.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

There are some new Allwinner SoCs available, namely A33, A83T and H3.
Update the documentation to mention those and the related documents.
Signed-off-by: NJens Kuske <jenskuske@gmail.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

For block devices which are small enough, mkfs will default to creating
a filesystem with block sizes smaller than page size.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Instead of using the platform code names, use the correct platform names
to identify the respective Intel NTB hardware.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

This is a simple debugging driver that enables the doorbell and
scratch pad registers to be read and written from the debugfs.  This
tool enables more complicated debugging to be scripted from user space.
This driver may be used to test that your ntb hardware and drivers are
functioning at a basic level.
Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

This is a simple ping pong driver that exercises the scratch pads and
doorbells of the ntb hardware.  This driver may be used to test that
your ntb hardware and drivers are functioning at a basic level.
Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Add module parameters for the addresses to be used in B2B topology.
Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Change ntb_hw_intel to use the new NTB hardware abstraction layer.

Split ntb_transport into its own driver.  Change it to use the new NTB
hardware abstraction layer.
Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Abstract the NTB device behind a programming interface, so that it can
support different hardware and client drivers.
Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Add an item to the checklist when submitting a new hwmon driver: only
some I2C addresses can be probed, others should not for safety
reasons.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>

Add pwm[4-7] and the associated pwm[4-7]_mode attributes.
Signed-off-by: NRoger Lucas <vt8231@hiddenengine.co.uk>
Signed-off-by: NJean Delvare <jdelvare@suse.de>

The platform firmware on some systems expects Linux to return "5" as
the supported ACPI revision which makes it expose system configuration
information in a special way.

For example, based on what ACPI exports as the supported revision,
Dell XPS 13 (2015) configures its audio device to either work in HDA
mode or in I2S mode, where the former is supposed to be used on Linux
until the latter is fully supported (in the kernel as well as in user
space).

Since ACPI 6 mandates that _REV should return "2" if ACPI 2 or later
is supported by the OS, a subsequent change will make that happen, so
make it possible to override that on systems where "5" is expected to
be returned for Linux to work correctly one them (such as the Dell
machine mentioned above).
Original-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The paths mentioned in this file weren't updated through some file
rename commits. Fix them to refer to the correct path.
Signed-off-by: NJames C Boyd <jcboyd.dev@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: corbet@lwn.net
Cc: trivial@kernel.org
Link: http://lkml.kernel.org/r/1435781606-3037-1-git-send-email-jcboyd.dev@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

To please checkpatch and the tiresome reader, add the "atmel," prefix to the
USB udc compatible string.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: <stable@vger.kernel.org>  #4.0+
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Add a early_enable module parameter to the omap_wdt that starts the
watchdog on module insertion. The default value is 0 which does not
start the watchdog - which also does not change the behavior if the
parameter is not given.
Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Allow an open fuse device to be "cloned".  Userspace can create a clone by:

      newfd = open("/dev/fuse", O_RDWR)
      ioctl(newfd, FUSE_DEV_IOC_CLONE, &oldfd);

At this point newfd will refer to the same fuse connection as oldfd.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Reviewed-by: NAshish Samant <ashish.samant@oracle.com>

Mateusz Guzik reported :

 Currently obtaining a new file descriptor results in locking fdtable
 twice - once in order to reserve a slot and second time to fill it.

Holding the spinlock in __fd_install() is needed in case a resize is
done, or to prevent a resize.

Mateusz provided an RFC patch and a micro benchmark :
  http://people.redhat.com/~mguzik/pipebench.c

A resize is an unlikely operation in a process lifetime,
as table size is at least doubled at every resize.

We can use RCU instead of the spinlock.

__fd_install() must wait if a resize is in progress.

The resize must block new __fd_install() callers from starting,
and wait that ongoing install are finished (synchronize_sched())

resize should be attempted by a single thread to not waste resources.

rcu_sched variant is used, as __fd_install() and expand_fdtable() run
from process context.

It gives us a ~30% speedup using pipebench on a dual Intel(R) Xeon(R)
CPU E5-2696 v2 @ 2.50GHz
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NMateusz Guzik <mguzik@redhat.com>
Acked-by: NMateusz Guzik <mguzik@redhat.com>
Tested-by: NMateusz Guzik <mguzik@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The mvneta driver supports the Ethernet IP found in the Armada 370, XP,
380 and 385 SoCs. Since at least one more hardware feature is available
for the Armada XP SoCs then a way to identify them is needed.

This patch introduces a new compatible string "marvell,armada-xp-neta".
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, watchdog subsystem require the misc subsystem to
register a watchdog. This may not be the case in case of an
early registration of a watchdog, which can be required when
the watchdog cannot be disabled.

This patch introduces a deferral mechanism to remove this requirement.
Signed-off-by: NJean-Baptiste Theou <jtheou@adeneo-embedded.us>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Maintainer information and documentation for drivers/nvdimm

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>