- 31 1月, 2011 2 次提交
-
-
由 Dmitry Torokhov 提交于
Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes, but rather return KEY_RESERVED. This fixes breakage with Ubuntu's input-kbd utility that stopped returning full keymaps for remote controls. Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com> Tested-by: NMark Lord <kernel@teksavvy.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in drivers/platform/x86/intel_scu_ipc.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2011 1 次提交
-
-
由 Artem Bityutskiy 提交于
This reverts commit a121f643. Unfortunately, this commit breaks UBIFS backward compatibility and makes new UBIFS refuse older UBIFS-formatted media: UBIFS error: validate_sb: min. I/O unit mismatch: 8 in superblock, 64 real Thus, we have to revert this patch and work on a better solution. Reported-by: NHolger Brunck <holger.brunck@keymile.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 29 1月, 2011 4 次提交
-
-
On some machines, like Dell Studio XPS 16 (1640), touchpad fails to respond to the standard query after first reset but may start responding later, so let's repeat reset sequence several (3) times. Signed-off-by: NAlexandre Peixoto Ferreira <alexandref75@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
synaptics_set_advanced_gesture_mode() affect capabilities bits we should perform comparison after calling this function, otherwise they will never match and we will be forced to perform full reconnect. Signed-off-by: NAlexandre Peixoto Ferreira <alexandref75@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Rakesh Iyer 提交于
Correct key mapping for Left Meta key. Signed-off-by: NRakesh Iyer <riyer@nvidia.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Rakesh Iyer 提交于
Fix build error introduced by variable name change. Signed-off-by: NRakesh Iyer <riyer@nvidia.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 28 1月, 2011 13 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
ata_pio_sectors() expects buffer for each sector to be contained in a single page; otherwise, it ends up overrunning the first page. This is achieved by setting queue DMA alignment. If sector_size is smaller than PAGE_SIZE and all buffers are sector_size aligned, buffer for each sector is always contained in a single page. This wasn't applied to ATAPI devices but IDENTIFY_PACKET is executed as ATA_PROT_PIO and thus uses ata_pio_sectors(). Newer versions of udev issue IDENTIFY_PACKET with unaligned buffer triggering the problem and causing oops. This patch fixes the problem by setting sdev->sector_size to ATA_SECT_SIZE on ATATPI devices and always setting DMA alignment to sector_size. While at it, add a warning for the unlikely but still possible scenario where sector_size is larger than PAGE_SIZE, in which case the alignment wouldn't be enough. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NJohn Stanley <jpsinthemix@verizon.net> Tested-by: NJohn Stanley <jpsinthemix@verizon.net> Cc: stable@kernel.org Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Francesco Antonacci 提交于
PIONEER DVR-212D can't do SETXFER like its sibling DVRTD08. Add ATA_HORKAGE_NOSETXFER for it. Reported in bko#27502. https://bugzilla.kernel.org/show_bug.cgi?id=27502Signed-off-by: NFrancesco Antonacci <fraanto@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Anssi Hannula 提交于
Commit 5f173107 added HFLAG_YES_FBS workaround for 88SE9128 (1b4b:9123). However, that change inadvertently caused the legacy IDE interface of the controller (with the same pci id) to become associated with the AHCI driver as well, causing the driver to try to bring the interface up in vain. Fix that by matching against class as well. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sergei Shtylyov 提交于
Commit ab81a505 (pata_hpt37x: unify ->pre_reset methods) neglected to remove the initializer for the prereset() method from 'hpt374_fn1_port_ops' (it's inherited from 'hpt372_port_ops' anyway), as well as to update the comment in hpt37x_init_one()... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Seth Heasley 提交于
This patch adds the AHCI-mode SATA DeviceID for the Intel DH89xxCC PCH. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sergei Shtylyov 提交于
hpt37x_init_one() has a large *if* statement which should really be folded into the *switch* statement that currently constitutes its *else* branch, reducing one level of indentation... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sergei Shtylyov 提交于
... the same as the 'pata_hpt366' driver does. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sergei Shtylyov 提交于
... in hpt_dma_blacklisted(). Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
pata_mpc52xx supports BMDMA but inherits ata_sff_port_ops which triggers BUG_ON() when a DMA command is issued. Fix it. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NRoman Fietze <roman.fietze@telemotive.de> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: stable@kernel.org Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Alex Deucher 提交于
clear state doesn't seem to work properly in some cases Fixes hangs in heavy 3D on some evergreen cards reported on IRC. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=33381 possibly others. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@gmail.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
- 27 1月, 2011 7 次提交
-
-
由 Alex Deucher 提交于
R6xx+ have per-block swappers. BE content in the framebuffer will now be swapped properly during scanout. Untested, however, the same code is reported working in the UMS ddx. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
由 Alex Deucher 提交于
Force DVI mode if the user specifies radeon.audio=0. The driver doesn't handle HDMI mode properly in some cases. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27731Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
由 Jerome Glisse 提交于
Check if there is a big enough dp clock & enough dp lane to drive the video mode provided. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-By: NAlex Deucher <alexdeucher@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
由 Michael Chan 提交于
On PPC for example, AER is not supported and we see unnecessary AER error message without this patch: bnx2 0003:01:00.1: pci_cleanup_aer_uncorrect_error_status failed 0xfffffffb Reported-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The chip's page tables did not set up properly on big endian machines, causing EEH errors on PPC machines. Reported-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch pivots the tg3 driver to the new VLAN infrastructure. All references to vlgrp have been removed. The driver still attempts to disable VLAN tag stripping if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2011 13 次提交
-
-
由 Sonic Zhang 提交于
The bfin_sdh driver allocates the wrong size for the private data in the mmc_host. The first parameter of mmc_alloc_host should be the size of the local driver struct rather than the common mmc_host. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: <stable@kernel.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jaehoon Chung 提交于
We have 8-bit width support but is not a v3 controller. So we need platform_8bit_width() to support 8-bit buswidth. Also we need MMC_CAP_8_BIT_DATA, so we add it in platdata. This gets 8-bit support working again on s3c, after we previously disabled 8-bit by default on non-v3 controllers. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jamie Iles 提交于
clk_get() returns a struct clk cookie to the driver and some platforms may return NULL if they only support a single clock. clk_get() has only failed if it returns a ERR_PTR() encoded pointer. Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Russell King - ARM Linux 提交于
Don't read the command response from the registers when either the command timed out (because there was no response from the card) or the checksum on the response was invalid. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jesper Juhl 提交于
Including usb.h once is enough in drivers/mmc/host/ushc.c This removes the duplicate. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Ping Cheng 提交于
Also remove fake ABS_RX/ABS_RY "axes" that were used to report physical dimensions now that we have better way. Signed-off-by: NPing Cheng <pingc@wacom.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Torben Hohn 提交于
The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: NTorben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Voss, Nikolaus 提交于
setup_irq() was called before clockevents_register_device() which is needed by the irq handler. Bug was reproducible by restarting the kernel using kexec (reliable crash). Signed-off-by: NNikolaus Voss <n.voss@weinmann.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Gordeev 提交于
Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the process that loads modules or even the whole kernel if the modules are compiled in. Use PARPORT_FLAG_EXCL to indicate this. Signed-off-by: NAlexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rodolfo Giometti 提交于
Signed-off-by: NRodolfo Giometti <giometti@linux.it> Reported-by: NIngo Molnar <mingo@elte.hu> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Gordeev 提交于
parport_unregister_device() should never be used when interrupts are enabled in hardware and irq handler is registered so there is no need to disable interrupts when using waitlist_lock. But there is no way to explain this subtle semantics to lockdep analyzer. So disable interrupts here too to simplify things. The price is negligible. Signed-off-by: NAlexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Feng Tang 提交于
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding "irq_eoi" for struct irq_chip, this patch is a follow up change for that. Also remove the unnecessary cast for a "void *". Signed-off-by: NFeng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Axel Lin 提交于
Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed Signed-off-by: NAxel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Luotao Fu <l.fu@pengutronix.de> Cc: Reviewed-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-