Modules: MIPS AU1x00 driver

AMD Au1x00 ALSA driver fails compilation with the alternate spinlock
implementation because it doesn't do locking/unlocking correctly in some
places (passes spinlock by value).
Signed-off-by: NKonstantin Baydarov <kbaidarov@ru.mvista.com>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

Add AC97_TUNE_HP_ONLY quirk for Dell Inspiron 8600.
Signed-off-by: NKaroly Lorentey <lorentey@elte.hu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

It appears that either the Audigy DMA engine or the Linux kernel cannot
handle 32 bit DMA with this device.  Problem manifests as noise when
using more than 2GB of RAM, possibly only on 64 bit machines.

The OSS driver actually uses a 29 bit DMA mask for both devices, this
seems like overkill for now.
Signed-off-by: NLee Revell <rlrevell@joe-job.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AZT3328 driver

this is now an even much more reworked patch (#3) for my azt3328.c ALSA driver.
IOW I spent another 4 evenings to get the sequencer timer to work properly
(my head is still hurting) and do lots of other cleanups.

Note that despite the extensive sequencer timer additions, the driver object
is still only 2kB bigger than the previous version, due to those many
optimizations...

Changes in version #3:
- fully working ALSA sequencer timer support for the card's 1024000Hz
  DirectX timer (downscaling adjustable via seqtimer_scaling module param)
- an insane amount of code optimizations
- many, many cleanups

Changes in version #2:
- FOUND the 1us DirectX timer area (yay!), made the code respect it
properly
- renamed some 'weird' mixer control names according to ControlNames.txt
- cleanup unneeded debug messages, reformatting
- improved I/O register documentation
- constified many more structs

Changes in version #1:
- improves/fixes some fatal playback/recording interaction
- improves IRQ handler performance (and actually fixes some weird code)
- coalesces some I/O accesses
- slightly improves I/O interface documentation
- improves/fixes logging
- defines out some less important debug code
- constifies some data
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver,Common EMU synth

This patch fixes problems with voices cutting off or not
sounding at all.
Signed-off-by: NTim <tedon@rogers.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core

Fix a typo (bogus check) in the last patch to fix Oops with suspend/resume.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HWDEP Midlevel,PCM Midlevel,RawMidi Midlevel,ALSA Core

Replace usage of CONFIG_SND_MAJOR with snd_major, where appropriate.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

Remove a superfluous include of the sound/minors.h header.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA Core,ALSA Minor Numbers

Remove the unused and undefined symbols SNDRV_DEVICE_TYPE_{MIXER,
PCM_PLOOP,PCM_CLOOP}, and introduce a new symbol SNDRV_MINOR_GLOBAL
for non-card-specific devices like the sequencer or the timer.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: AD1889 driver,RME9652 driver

This is the sound/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in sound/.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time conversion functions instead of hard-coded division to avoid
rounding issues.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

1.In intel8x0_measure_ac97_clock routine, when stop DMA, there is not stop
  DMA corectly, but start another PCM In2 DMA engine.
2.In do_ali_reset routine, there is only need to enable PCM IN and PCM OUT.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: CA0106 driver

Just tidying up the code. Making more functions static.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: ALSA<-OSS emulation,USB generic driver,USB USX2Y

Added missing KERN_* prefix to printk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: PCI drivers,CA0106 driver

Author: Tilman Kranz <tilde@tk-sls.de>
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: RME HDSP driver

- Add missing KERN_* suffix to printk.
- Clean up parentheses.
- clean up the firmware check code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add missing KERN_* suffix to printk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,ALI5451 driver,NM256 driver

Removed multi-card supports for ali5451 and nm256 drivers.
They are supposed to be a single device.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the type of enable module option to bool.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Add description about a new option of nm256 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: NM256 driver

The current snd-nm256 driver can cause Dell Latitude CSx laptops to
lock-up during module (un)load.  I have isolated this to the writes to
the control port register at offset 0x6cc which were not already
protected by the existing reset_workaround.

I tried grouping these writes with the existing reset_workaround
clause, but that caused the driver to have (un)load problems on the
Dell Latitude LS laptops.  So, I have implemented a reset_workaround_2
clause (please feel free to suggest a better name!) to cover this
situation and added a quirk entry for the CSx laptops.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: YMFPCI driver

We better pretend that the ymfpci timer runs at 48 kHz because the
interrupt frequency cannot be higher, and clients that would try to
use 96 kHz would run at half their desired speed.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA sequencer

When no default timer frequency has been set, initialize_timer() just
uses the maximum frequency supported by the timer, which is ridiculously
high on 96 kHz timers.

This patch introduces a default frequency of 1000 Hz for this case, and
makes sure that a frequency set by the user isn't too high.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Maestro3 driver

This patch fixes the maestro3 driver to call the snd_m3_assp_init
function to write the DSP firmware into the ASSP chip before sending the
RUN_ASSP command, thereby solving the hang after a cold boot.
Signed-off-by: NCharles R. Anderson <cra@alum.wpi.edu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

- Set buggy_irq parameter before registration of irq handler.
- Clean up module parameter handling.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

The change only affects the via823x kind of chips.
Here the  via8233_pcm_pointer_hw() function
(named snd_via8233_pcm_pointer() before)
needed to loop until a non zero position is red from the chip.

Measurements have shown that more than 200 loops are typically needed on
an Athlon64.
As io-reads cost many cycles, those loops sum up huge.
via8233_pcm_pointer_hw() runs either in interrupt or with interrupts
disabled. So it introduces significant interrupt latency.

The patch introduces a calculated position value hwptr_done,
that is updated by the interrupt routine when a period is completed.
It is only used, if the 823x chip returns a zero position, which can't
be interpreted reliably.

Further optimisation is applied on the 8233 chip's interrupt routine:
Only the SGD_SHADOW is read, as it contains all infos needed.
We ommit ~5 more register reads that way.
Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Remove the usb_reset_configuration() call from the probe callback
because it isn't needed and it may interfere with other drivers
already loaded for the device.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: VIA82xx driver

The patch enable separate DXS controls of sound function of VIA VT82xx
controller in case DXS volume is not needed for PCM Playback volume
control emulation.
Signed-off-by: NHonza Maly <hkmaly@matfyz.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,MIPS AU1x00 driver,PPC Beep,SPARC DBRI driver

Removed the use of chip_t, which was obsoleted.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Timer Midlevel

Split or rewrite lines that are longer than 80 characters, and remove
whitespaces at the end of lines.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Timer Midlevel

The return value of list_entry() already has the type from the second
argument, so we don't need to typecase it again.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: RTC timer driver,Timer Midlevel

Add a module pointer to the timer structure and use it for refcounting
instead of the card's module pointer to prevent the global timer
modules (rtctimer and hpetimer) from being removed while in use.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Timer Midlevel

Add checks to return -ENOMEM in case snd_timer_instance_new() fails.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ICE1724 driver

Add support of SPDIF output with sample rates higher than 48kHz.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core

Added the missing forward declaration before function prototypes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Get subsytem ID from AFG/MFG if not obtained from the root node.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ES1938 driver

- Clean up the last PM fix
- Add TRIGGER_SUSPEND/RESUME to disable/enable DMA properly during PM
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ES1938 driver

This patch fixes the suspend/resume issue I'm having with ESS-Solo1
soundcard. Without this patch I might get after resume message
that kernel is disabling the IRQ5 (soundcard). If there was something
playing it wont continue after resume without this patch.
Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added the DXS entry for Clevo D470 laptop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>