- 25 3月, 2008 2 次提交
-
-
由 Marcelo Tosatti 提交于
Do not assume that a shadow mapping will always point to the same host frame number. Fixes crash with madvise(MADV_DONTNEED). [avi: move after first printk(), add another printk()] Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
is_rmap_pte() doesn't take into account io ptes, which have the avail bit set. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 04 3月, 2008 3 次提交
-
-
由 Avi Kivity 提交于
For improved concurrency, the guest walk is performed concurrently with other vcpus. This means that we need to revalidate the guest ptes once we have write-protected the guest page tables, at which point they can no longer be modified. The current code attempts to avoid this check if the shadow page table is not new, on the assumption that if it has existed before, the guest could not have modified the pte without the shadow lock. However the assumption is incorrect, as the racing vcpu could have modified the pte, then instantiated the shadow page, before our vcpu regains control: vcpu0 vcpu1 fault walk pte modify pte fault in same pagetable instantiate shadow page lookup shadow page conclude it is old instantiate spte based on stale guest pte We could do something clever with generation counters, but a test run by Marcelo suggests this is unnecessary and we can just do the revalidation unconditionally. The pte will be in the processor cache and the check can be quite fast. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
the cr3 variable is now inside the vcpu->arch structure. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
This patch replaces the mmap_sem lock for the memory slots with a new kvm private lock, it is needed beacuse untill now there were cases where kvm accesses user memory while holding the mmap semaphore. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 31 1月, 2008 8 次提交
-
-
由 Izik Eidus 提交于
Right now rmap_remove won't set the page as dirty if the shadow pte pointed to this page had write access and then it became readonly. This patches fixes that, by setting the page as dirty for spte changes from write to readonly access. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
If some other cpu steals mmu pages between our check and an attempt to allocate, we can run out of mmu pages. Fix by moving the check into the same critical section as the allocation. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
Convert the synchronization of the shadow handling to a separate mmu_lock spinlock. Also guard fetch() by mmap_sem in read-mode to protect against alias and memslot changes. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Since gfn_to_page() is a sleeping function, and we want to make the core mmu spinlocked, we need to pass the page from the walker context (which can sleep) to the shadow context (which cannot). [marcelo: avoid recursive locking of mmap_sem] Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
Do not hold kvm->lock mutex across the entire pagefault code, only acquire it in places where it is necessary, such as mmu hash list, active list, rmap and parent pte handling. Allow concurrent guest walkers by switching walk_addr() to use mmap_sem in read-mode. And get rid of the lockless __gfn_to_page. [avi: move kvm_mmu_pte_write() locking inside the function] [avi: add locking for real mode] [avi: fix cmpxchg locking] Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Eddie Dong 提交于
Host side TLB flush can be merged together if multiple spte need to be write-protected. Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This paves the way for multiple architecture support. Note that while ioapic.c could potentially be shared with ia64, it is also moved. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 30 1月, 2008 27 次提交
-
-
由 Zhang Xiantao 提交于
This patches moves mmu-related fields to kvm_arch. Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com> Acked-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Zhang Xiantao 提交于
Since these functions need to know the details of kvm or kvm_vcpu structure, it can't be put in x86.h. Create mmu.h to hold them. Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com> Acked-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Zhang Xiantao 提交于
Move all the architecture-specific fields in kvm_vcpu into a new struct kvm_vcpu_arch. Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com> Acked-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
There is a race where VCPU0 is shadowing a pagetable entry while VCPU1 is updating it, which results in a stale shadow copy. Fix that by comparing the contents of the cached guest pte with the current guest pte after write-protecting the guest pagetable. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
In addition to removing some duplicated code, this also handles the unlikely case of real-mode code updating a guest page table. This can happen when one vcpu (in real mode) touches a second vcpu's (in protected mode) page tables, or if a vcpu switches to real mode, touches page tables, and switches back. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
As set_pte() no longer references either a gpte or the guest walker, we can move it out of paging mode dependent code (which compiles twice and is generally nasty). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
When we emulate a guest pte write, we fail to apply the correct inherited permissions from the parent ptes. Now that we store inherited permissions in the shadow page, we can use that to update the pte permissions correctly. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The nx bit is awkwardly placed in the 63rd bit position; furthermore it has a reversed meaning compared to the other bits, which means we can't use a bitwise and to calculate compounded access masks. So, we simplify things by creating a new 3-bit exec/write/user access word, and doing all calculations in that. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Mark guest pages as accessed when removed from the shadow page tables for better lru processing. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Rename the awkwardly named variable. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
These are traditionally named 'page', but even more traditionally, that name is reserved for variables that point to a 'struct page'. Rename them to 'sp' (for "shadow page"). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Converting last uses along the way. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
No longer used. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Instead of passing an hpa, pass a regular struct page. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Similar information is available in the gfn parameter, so use that. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
If the guest requests just a tlb flush, don't take the vm lock and drop the mmu context pointlessly. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
If all we're doing is increasing permissions on a pte (typical for demand paging), then there's not need to flush remote tlbs. Worst case they'll get a spurious page fault. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Zhang Xiantao 提交于
Instead of incrementally changing the mmu cache size for every memory slot operation, recalculate it from scratch. This is simpler and safer. Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Improve dirty bit setting for pages that kvm release, until now every page that we released we marked dirty, from now only pages that have potential to get dirty we mark dirty. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
When we map a page, we check whether some other vcpu mapped it for us and if so, bail out. But we should decrease the refcount on the page as we do so. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Emulation may cause a shadow pte to be instantiated, which requires memory resources. Make sure the caches are filled to avoid an oops. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The code that dispatches the page fault and emulates if we failed to map is duplicated across vmx and svm. Merge it to simplify further bugfixing. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-