- Store sysctl_ping_group_range as a paire of kgid_t values
  instead of a pair of gid_t values.
- Move the kgid conversion work from ping_init_sock into ipv4_ping_group_range
- For invalid cases reset to the default disabled state.

With the kgid_t conversion made part of the original value sanitation
from userspace understand how the code will react becomes clearer
and it becomes possible to set the sysctl ping group range from
something other than the initial user namespace.

Cc: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Cc: Klaus Heinrich Kiwi <klausk@br.ibm.com>
Cc: Eric Paris <eparis@redhat.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

With the existence of kuid_t and kgid_t we can take this further
and remove the usage of struct cred altogether, ensuring we
don't get cache line misses from reference counts.   For now
however start simply and do a straight forward conversion
I can be certain is correct.

In cred_to_ucred use from_kuid_munged and from_kgid_munged
as these values are going directly to userspace and we want to use
the userspace safe values not -1 when reporting a value that does not
map.  The earlier conversion that used from_kuid was buggy in that
respect.  Oops.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Avoid crashing if the crypto key payload was NULL, as when it was not correctly
allocated and initialized.  Also, avoid leaking it.
Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Implement the new swapfile a_ops for NFS and hook up ->direct_IO.  This
will set the NFS socket to SOCK_MEMALLOC and run socket reconnect under
PF_MEMALLOC as well as reset SOCK_MEMALLOC before engaging the protocol
->connect() method.

PF_MEMALLOC should allow the allocation of struct socket and related
objects and the early (re)setting of SOCK_MEMALLOC should allow us to
receive the packets required for the TCP connection buildup.

[jlayton@redhat.com: Restore PF_MEMALLOC task flags in all cases]
[dfeng@redhat.com: Fix handling of multiple swap files]
[a.p.zijlstra@chello.nl: Original patch]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch series is based on top of "Swap-over-NBD without deadlocking
v15" as it depends on the same reservation of PF_MEMALLOC reserves logic.

When a user or administrator requires swap for their application, they
create a swap partition and file, format it with mkswap and activate it
with swapon.  In diskless systems this is not an option so if swap if
required then swapping over the network is considered.  The two likely
scenarios are when blade servers are used as part of a cluster where the
form factor or maintenance costs do not allow the use of disks and thin
clients.

The Linux Terminal Server Project recommends the use of the Network Block
Device (NBD) for swap but this is not always an option.  There is no
guarantee that the network attached storage (NAS) device is running Linux
or supports NBD.  However, it is likely that it supports NFS so there are
users that want support for swapping over NFS despite any performance
concern.  Some distributions currently carry patches that support swapping
over NFS but it would be preferable to support it in the mainline kernel.

Patch 1 avoids a stream-specific deadlock that potentially affects TCP.

Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC
	reserves.

Patch 3 adds three helpers for filesystems to handle swap cache pages.
	For example, page_file_mapping() returns page->mapping for
	file-backed pages and the address_space of the underlying
	swap file for swap cache pages.

Patch 4 adds two address_space_operations to allow a filesystem
	to pin all metadata relevant to a swapfile in memory. Upon
	successful activation, the swapfile is marked SWP_FILE and
	the address space operation ->direct_IO is used for writing
	and ->readpage for reading in swap pages.

Patch 5 notes that patch 3 is bolting
	filesystem-specific-swapfile-support onto the side and that
	the default handlers have different information to what
	is available to the filesystem. This patch refactors the
	code so that there are generic handlers for each of the new
	address_space operations.

Patch 6 adds an API to allow a vector of kernel addresses to be
	translated to struct pages and pinned for IO.

Patch 7 adds support for using highmem pages for swap by kmapping
	the pages before calling the direct_IO handler.

Patch 8 updates NFS to use the helpers from patch 3 where necessary.

Patch 9 avoids setting PF_private on PG_swapcache pages within NFS.

Patch 10 implements the new swapfile-related address_space operations
	for NFS and teaches the direct IO handler how to manage
	kernel addresses.

Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO
	where appropriate.

Patch 12 fixes a NULL pointer dereference that occurs when using
	swap-over-NFS.

With the patches applied, it is possible to mount a swapfile that is on an
NFS filesystem.  Swap performance is not great with a swap stress test
taking roughly twice as long to complete than if the swap device was
backed by NBD.

This patch: netvm: prevent a stream-specific deadlock

It could happen that all !SOCK_MEMALLOC sockets have buffered so much data
that we're over the global rmem limit.  This will prevent SOCK_MEMALLOC
buffers from receiving data, which will prevent userspace from running,
which is needed to reduce the buffered data.

Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit.  Once
this change it applied, it is important that sockets that set
SOCK_MEMALLOC do not clear the flag until the socket is being torn down.
If this happens, a warning is generated and the tokens reclaimed to avoid
accounting errors until the bug is fixed.

[davem@davemloft.net: Warning about clearing SOCK_MEMALLOC]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to make sure pfmemalloc packets receive all memory needed to
proceed, ensure processing of pfmemalloc SKBs happens under PF_MEMALLOC.
This is limited to a subset of protocols that are expected to be used for
writing to swap.  Taps are not allowed to use PF_MEMALLOC as these are
expected to communicate with userspace processes which could be paged out.

[a.p.zijlstra@chello.nl: Ideas taken from various patches]
[jslaby@suse.cz: Lock imbalance fix]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the skb allocation API to indicate RX usage and use this to fall
back to the PFMEMALLOC reserve when needed.  SKBs allocated from the
reserve are tagged in skb->pfmemalloc.  If an SKB is allocated from the
reserve and the socket is later found to be unrelated to page reclaim, the
packet is dropped so that the memory remains available for page reclaim.
Network protocols are expected to recover from this packet loss.

[a.p.zijlstra@chello.nl: Ideas taken from various patches]
[davem@davemloft.net: Use static branches, coding style corrections]
[sebastian@breakpoint.cc: Avoid unnecessary cast, fix !CONFIG_NET build]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow specific sockets to be tagged SOCK_MEMALLOC and use __GFP_MEMALLOC
for their allocations.  These sockets will be able to go below watermarks
and allocate from the emergency reserve.  Such sockets are to be used to
service the VM (iow.  to swap over).  They must be handled kernel side,
exposing such a socket to user-space is a bug.

There is a risk that the reserves be depleted so for now, the
administrator is responsible for increasing min_free_kbytes as necessary
to prevent deadlock for their workloads.

[a.p.zijlstra@chello.nl: Original patches]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce sk_gfp_atomic(), this function allows to inject sock specific
flags to each sock related allocation.  It is only used on allocation
paths that may be required for writing pages back to network storage.

[davem@davemloft.net: Use sk_gfp_atomic only when necessary]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sanity:

CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG
CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED
CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM

[mhocko@suse.cz: fix missed bits]
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a device is unregistered, we have to purge all of the
references to it that may exist in the entire system.

If a route is uncached, we currently have no way of accomplishing
this.

So create a global list that is scanned when a network device goes
down.  This mirrors the logic in net/core/dst.c's dst_ifdown().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Input path is mostly run under RCU and doesnt touch dst refcnt

But output path on forwarding or UDP workloads hits
badly dst refcount, and we have lot of false sharing, for example
in ipv4_mtu() when reading rt->rt_pmtu

Using a percpu cache for nh_rth_output gives a nice performance
increase at a small cost.

24 udpflood test on my 24 cpu machine (dummy0 output device)
(each process sends 1.000.000 udp frames, 24 processes are started)

before : 5.24 s
after : 2.06 s
For reference, time on linux-3.5 : 6.60 s
Signed-off-by: NEric Dumazet <edumazet@google.com>
Tested-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 404e0a8b (net: ipv4: fix RCU races on dst refcounts) tried
to solve a race but added a problem at device/fib dismantle time :

We really want to call dst_free() as soon as possible, even if sockets
still have dst in their cache.
dst_release() calls in free_fib_info_rcu() are not welcomed.

Root of the problem was that now we also cache output routes (in
nh_rth_output), we must use call_rcu() instead of call_rcu_bh() in
rt_free(), because output route lookups are done in process context.

Based on feedback and initial patch from David Miller (adding another
call_rcu_bh() call in fib, but it appears it was not the right fix)

I left the inet_sk_rx_dst_set() helper and added __rcu attributes
to nh_rth_output and nh_rth_input to better document what is going on in
this code.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We drop the lock when calling the ->alloc_msg() con op, which means
we need to (a) not clobber con->in_msg without the mutex held, and (b)
we need to verify that we are still in the OPEN state when we retake
it to avoid causing any mayhem.  If the state does change, -EAGAIN
will get us back to con_work() and loop.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

This function's calling convention is very limiting.  In particular,
we can't return any error other than ENOMEM (and only implicitly),
which is a problem (see next patch).

Instead, return an normal 0 or error code, and make the skip a pointer
output parameter.  Drop the useless in_hdr argument (we have the con
pointer).
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

The ceph_fault() function takes the con mutex, so we should avoid
dropping it before calling it.  This fixes a potential race with
another thread calling ceph_con_close(), or _open(), or similar (we
don't reverify con->state after retaking the lock).

Add annotation so that lockdep realizes we will drop the mutex before
returning.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

We drop the con mutex when delivering a message.  When we retake the
lock, we need to verify we are still in the OPEN state before
preparing to read the next tag, or else we risk stepping on a
connection that has been closed.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Revoke all mon_client messages when we shut down the old connection.
This is mostly moot since we are re-using the same ceph_connection,
but it is cleaner.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

If the connect() call immediately fails such that sock == NULL, we
still need con_close_socket() to reset our socket state to CLOSED.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

There are many (normal) conditions that can lead to us getting
unexpected replies, include cluster topology changes, osd failures,
and timeouts.  There's no need to spam the console about it.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Signed-off-by: NSage Weil <sage@inktank.com>

Rename flags with CON_FLAG prefix, move the definitions into the c file,
and (better) document their meaning.
Signed-off-by: NSage Weil <sage@inktank.com>

Use a simple set of 6 enumerated values for the socket states (CON_STATE_*)
and use those instead of the state bits.  All of the con->state checks are
now under the protection of the con mutex, so this is safe.  It also
simplifies many of the state checks because we can check for anything other
than the expected state instead of various bits for races we can think of.

This appears to hold up well to stress testing both with and without socket
failure injection on the server side.
Signed-off-by: NSage Weil <sage@inktank.com>

If we are CLOSED, the socket is closed and we won't get these.
Signed-off-by: NSage Weil <sage@inktank.com>

It is simpler to do this immediately, since we already hold the con mutex.
It also avoids the need to deal with a not-quite-CLOSED socket in con_work.
Signed-off-by: NSage Weil <sage@inktank.com>

If the state is CLOSED or OPENING, we shouldn't have a socket.
Signed-off-by: NSage Weil <sage@inktank.com>

Take the con mutex before checking whether the connection is closed to
avoid racing with someone else closing it.
Signed-off-by: NSage Weil <sage@inktank.com>

Avoid dropping and retaking con->mutex in the ceph_con_send() case by
leaving locking up to the caller.
Signed-off-by: NSage Weil <sage@inktank.com>

If we fault on a lossy connection, we should still close the socket
immediately, and do so under the con mutex.

We should also take the con mutex before printing out the state bits in
the debug output.
Signed-off-by: NSage Weil <sage@inktank.com>

This is a trivial fix for the debug output, as it is inconsistent
with the function name so may confuse people when debugging.

[elder@inktank.com: switched to use __func__]
Signed-off-by: NJiaju Zhang <jjzhang@suse.de>
Reviewed-by: NAlex Elder <elder@inktank.com>

We exponentially back off when we encounter connection errors.  If several
errors accumulate, we will eventually wait ages before even trying to
reconnect.

Fix this by resetting the backoff counter after a successful negotiation/
connection with the remote node.  Fixes ceph issue #2802.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Take the con mutex while we are initiating a ceph open.  This is necessary
because the may have previously been in use and then closed, which could
result in a racing workqueue running con_work().
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Previously, we were opportunistically initializing the bio_iter if it
appeared to be uninitialized in the middle of the read path.  The problem
is that a sequence like:

 - start reading message
 - initialize bio_iter
 - read half a message
 - messenger fault, reconnect
 - restart reading message
 - ** bio_iter now non-NULL, not reinitialized **
 - read past end of bio, crash

Instead, initialize the bio_iter unconditionally when we allocate/claim
the message for read.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

The linger op registration (i.e., watch) modifies the object state.  As
such, the OSD will reply with success if it has already applied without
doing the associated side-effects (setting up the watch session state).
If we lose the ACK and resubmit, we will see success but the watch will not
be correctly registered and we won't get notifies.

To fix this, always resubmit the linger op with a new tid.  We accomplish
this by re-registering as a linger (i.e., 'registered') if we are not yet
registered.  Then the second loop will treat this just like a normal
case of re-registering.

This mirrors a similar fix on the userland ceph.git, commit 5dd68b95, and
ceph bug #2796.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

Hold the mutex while twiddling all of the state bits to avoid possible
races.  While we're here, make not of why we cannot close the socket
directly.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

We need to set error_msg to something useful before calling ceph_fault();
do so here for try_{read,write}().  This is more informative than

libceph: osd0 192.168.106.220:6801 (null)
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>