提交 · 6ff5894cdfe7103083bd15b31002434ccd351039 · openeuler / raspberrypi-kernel

03 12月, 2009 40 次提交

KVM: Enable 32bit dirty log pointers on 64bit host · 6ff5894c

由 Arnd Bergmann 提交于 10月 22, 2009

With big endian userspace, we can't quite figure out if a pointer
is 32 bit (shifted >> 32) or 64 bit when we read a 64 bit pointer.

This is what happens with dirty logging. To get the pointer interpreted
correctly, we thus need Arnd's patch to implement a compat layer for
the ioctl:

A better way to do this is to add a separate compat_ioctl() method that
converts this for you.

Based on initial patch from Arnd Bergmann.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

6ff5894c

KVM: allow userspace to adjust kvmclock offset · afbcf7ab

由 Glauber Costa 提交于 10月 16, 2009

When we migrate a kvm guest that uses pvclock between two hosts, we may
suffer a large skew. This is because there can be significant differences
between the monotonic clock of the hosts involved. When a new host with
a much larger monotonic time starts running the guest, the view of time
will be significantly impacted.

Situation is much worse when we do the opposite, and migrate to a host with
a smaller monotonic clock.

This proposed ioctl will allow userspace to inform us what is the monotonic
clock value in the source host, so we can keep the time skew short, and
more importantly, never goes backwards. Userspace may also need to trigger
the current data, since from the first migration onwards, it won't be
reflected by a simple call to clock_gettime() anymore.

[marcelo: future-proof abi with a flags field]
[jan: fix KVM_GET_CLOCK by clearing flags field instead of checking it]
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

afbcf7ab

KVM: fix irq_source_id size verification · cd5a2685

由 Marcelo Tosatti 提交于 10月 17, 2009

find_first_zero_bit works with bit numbers, not bytes.

Fixes

https://sourceforge.net/tracker/?func=detail&aid=2847560&group_id=180599&atid=893831Reported-by: N"Xu, Jiajun" <jiajun.xu@intel.com>
Cc: stable@kernel.org
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

cd5a2685

KVM: SVM: Cleanup NMI singlestep · 6be7d306

由 Jan Kiszka 提交于 10月 18, 2009

Push the NMI-related singlestep variable into vcpu_svm. It's dealing
with an AMD-specific deficit, nothing generic for x86.
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

 arch/x86/include/asm/kvm_host.h |    1 -
 arch/x86/kvm/svm.c              |   12 +++++++-----
 2 files changed, 7 insertions(+), 6 deletions(-)
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

6be7d306

KVM: x86: Fix guest single-stepping while interruptible · 94fe45da

由 Jan Kiszka 提交于 10月 18, 2009

Commit 705c5323 opened the doors of hell by unconditionally injecting
single-step flags as long as guest_debug signaled this. This doesn't
work when the guest branches into some interrupt or exception handler
and triggers a vmexit with flag reloading.

Fix it by saving cs:rip when user space requests single-stepping and
restricting the trace flag injection to this guest code position.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

94fe45da

KVM: Xen PV-on-HVM guest support · ffde22ac

由 Ed Swierk 提交于 10月 15, 2009

Support for Xen PV-on-HVM guests can be implemented almost entirely in
userspace, except for handling one annoying MSR that maps a Xen
hypercall blob into guest address space.

A generic mechanism to delegate MSR writes to userspace seems overkill
and risks encouraging similar MSR abuse in the future.  Thus this patch
adds special support for the Xen HVM MSR.

I implemented a new ioctl, KVM_XEN_HVM_CONFIG, that lets userspace tell
KVM which MSR the guest will write to, as well as the starting address
and size of the hypercall blobs (one each for 32-bit and 64-bit) that
userspace has loaded from files.  When the guest writes to the MSR, KVM
copies one page of the blob from userspace to the guest.

I've tested this patch with a hacked-up version of Gerd's userspace
code, booting a number of guests (CentOS 5.3 i386 and x86_64, and
FreeBSD 8.0-RC1 amd64) and exercising PV network and block devices.

[jan: fix i386 build warning]
[avi: future proof abi with a flags field]
Signed-off-by: NEd Swierk <eswierk@aristanetworks.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

ffde22ac

KVM: x86: Drop unneeded CONFIG_HAS_IOMEM check · 94c30d9c

由 Jan Kiszka 提交于 10月 12, 2009

This (broken) check dates back to the days when this code was shared
across architectures. x86 has IOMEM, so drop it.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

94c30d9c

M
KVM: VMX: fix handle_pause declaration · 9fb41ba8
由 Marcelo Tosatti 提交于 10月 12, 2009
```
There's no kvm_run argument anymore.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
```
9fb41ba8

KVM: x86: Harden against cpufreq · 6b7d7e76

由 Zachary Amsden 提交于 10月 09, 2009

If cpufreq can't determine the CPU khz, or cpufreq is not compiled in,
we should fallback to the measured TSC khz.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

6b7d7e76

KVM: SVM: Support Pause Filter in AMD processors · 565d0998

由 Mark Langsdorf 提交于 10月 06, 2009

New AMD processors (Family 0x10 models 8+) support the Pause
Filter Feature.  This feature creates a new field in the VMCB
called Pause Filter Count.  If Pause Filter Count is greater
than 0 and intercepting PAUSEs is enabled, the processor will
increment an internal counter when a PAUSE instruction occurs
instead of intercepting.  When the internal counter reaches the
Pause Filter Count value, a PAUSE intercept will occur.

This feature can be used to detect contended spinlocks,
especially when the lock holding VCPU is not scheduled.
Rescheduling another VCPU prevents the VCPU seeking the
lock from wasting its quantum by spinning idly.

Experimental results show that most spinlocks are held
for less than 1000 PAUSE cycles or more than a few
thousand.  Default the Pause Filter Counter to 3000 to
detect the contended spinlocks.

Processor support for this feature is indicated by a CPUID
bit.

On a 24 core system running 4 guests each with 16 VCPUs,
this patch improved overall performance of each guest's
32 job kernbench by approximately 3-5% when combined
with a scheduler algorithm thati caused the VCPU to
sleep for a brief period. Further performance improvement
may be possible with a more sophisticated yield algorithm.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

565d0998

KVM: VMX: Add support for Pause-Loop Exiting · 4b8d54f9

由 Zhai, Edwin 提交于 10月 09, 2009

New NHM processors will support Pause-Loop Exiting by adding 2 VM-execution
control fields:
PLE_Gap    - upper bound on the amount of time between two successive
             executions of PAUSE in a loop.
PLE_Window - upper bound on the amount of time a guest is allowed to execute in
             a PAUSE loop

If the time, between this execution of PAUSE and previous one, exceeds the
PLE_Gap, processor consider this PAUSE belongs to a new loop.
Otherwise, processor determins the the total execution time of this loop(since
1st PAUSE in this loop), and triggers a VM exit if total time exceeds the
PLE_Window.
* Refer SDM volume 3b section 21.6.13 & 22.1.3.

Pause-Loop Exiting can be used to detect Lock-Holder Preemption, where one VP
is sched-out after hold a spinlock, then other VPs for same lock are sched-in
to waste the CPU time.

Our tests indicate that most spinlocks are held for less than 212 cycles.
Performance tests show that with 2X LP over-commitment we can get +2% perf
improvement for kernel build(Even more perf gain with more LPs).
Signed-off-by: NZhai Edwin <edwin.zhai@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

4b8d54f9

KVM: introduce kvm_vcpu_on_spin · d255f4f2

由 Zhai, Edwin 提交于 10月 09, 2009

Introduce kvm_vcpu_on_spin, to be used by VMX/SVM to yield processing
once the cpu detects pause-based looping.
Signed-off-by: N"Zhai, Edwin" <edwin.zhai@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

d255f4f2

KVM: SVM: Remove nsvm_printk debugging code · d36f19e9