Use comedi_timeout() to wait for the analog input and output end-of-
conversions.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog output end-of-conversion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_timeout() to wait for the analog input end-of-conversion.

Since this is the sample skeleton driver, add comments about how the
callback function works with comedi_timeout().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a comedi core helper function to handle the boilerplate
needed by the drivers to busy- wait for a condition to occur.
Typically this condition is the analog input/output end-of-conversion
used with the comedi (*insn_read) and (*insn_write) operations.

To use this function, the drivers just need to provide a callback
that checks for the desired condition. The callback should return
0 if the condition is met or -EBUSY if it is still waiting. Any
other errno will be returned to the caller. If the timeout occurs
before the condition is met -ETIMEDOUT will be returned.

The parameters to the callback function are the comedi_device,
comedi_subdevice, and comedi_insn pointers that were passed to the
(*insn_read) or (*insn_write) as well as an unsigned long, driver
specific, 'context' that can be used to pass any other information
that might be needed in the callback. This 'context' could be anything
such as the register offset to read the status or the bits needed
to check the status. The comedi_timeout() function itself does not
use any of these parameters.

This will help remove all the crazy "wait this many loops" used by
some of the drivers. It also creates a common errno for comedi to
detect when a timeout occurs.

ADC/DAC conversion times are typically pretty fast, usually around
100K samples/sec (10 usec). A conservative timeout of 1 second is used
in comedi_timeout().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/lustre/lustre/llite/dir.c:1416:2-8: Replace memcpy with struct assignment

Generated by: coccinelle/misc/memcpy-assign.cocci

CC: Peng Tao <bergwolf@gmail.com>
CC: Andreas Dilger <andreas.dilger@intel.com>
CC: Oleg Drokin <oleg.drokin@intel.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/gs_fpgaboot/gs_fpgaboot.c:191:2-3: Unneeded semicolon

 Removes unneeded semicolon.

Generated by: coccinelle/misc/semicolon.cocci

CC: Insop Song <insop.song@gainspeed.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/gs_fpgaboot/gs_fpgaboot.c:305:1-3: WARNING: PTR_RET can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: coccinelle/api/ptr_ret.cocci

CC: Insop Song <insop.song@gainspeed.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The symbol is an orphan, get rid of it.

Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove h2clbk.h and nic_spec.h header files.
Signed-off-by: Nnavin patidar <navin.patidar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch reports the following:

core/rtw_ieee80211.c:489 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:491 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:493 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:495 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:497 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:505 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:507 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:509 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:511 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:513 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:534 rtw_parse_wpa_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:579 rtw_parse_wpa_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:649 rtw_parse_wpa2_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:803 rtw_get_wps_attr() warn: add some parenthesis here?
core/rtw_ieee80211.c:1213 rtw_get_p2p_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:1248 rtw_get_p2p_attr() warn: add some parenthesis here?
core/rtw_mlme.c:258 _rtw_find_network() warn: add some parenthesis here?
core/rtw_mlme.c:1581 rtw_check_join_candidate() warn: this array is probably non-NULL. 'pmlmepriv->assoc_ssid.Ssid'
core/rtw_mlme.c:1843 SecIsInPMKIDList() warn: add some parenthesis here?
core/rtw_mlme_ext.c:4189 on_action_public_vendor() warn: add some parenthesis here?
core/rtw_recv.c:1157 validate_recv_mgnt_frame() warn: add some parenthesis here?
core/rtw_xmit.c:671 xmitframe_addmic() warn: add some parenthesis here?
hal/rtl8188e_mp.c:206 Hal_MPT_CCKTxPowerAdjustbyIndex() error: buffer overflow 'CCKSwingTable_Ch1_Ch13' 33 <= 255
hal/rtl8188e_mp.c:215 Hal_MPT_CCKTxPowerAdjustbyIndex() error: buffer overflow 'CCKSwingTable_Ch14' 33 <= 255

Not listed here is one remaining buffer overflow message that I believe to be an error in Smatch.

These warnings were reported by Dan Carpenter.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

White space clean up

Camel case changes
pDevice -> priv
pMgmt -> mgmt
byTmpMode -> tmp
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

set u64 mc_filter to ~0x0 multi cast filter off and write MAC_REG_MAR0 using
MACvWriteMultiAddr to replace pbyData.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert mc_filter to u64, preform netdev_for_each_mc_addr
mask filtering.

In MACvWriteMultiAddr endian correct mc_filter and write
the entire multicast once.
Reported-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The rtw_recv_indicatepkt() function in the file named
drivers/staging/rtl8188eu/os_dep/recv_linux.c has this strange code:

	rcu_read_lock();
	rcu_dereference(padapter->pnetdev->rx_handler_data);
	rcu_read_unlock();

This code has no effect.  Normally, you would assign the result of
rcu_dereference() to some variable, but it is not clear from the
code what variable that would be.  Therefore, this patch applies to
the TODO file instead of the code itself.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After updating Smatch, the following new errors and warnings are reported:

drivers/staging/rtl8188eu/core/rtw_recv.c:368 recvframe_chkmic() warn: variable dereferenced before check 'psecuritypriv' (see line 364)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2642 rtw_wps_start() warn: variable dereferenced before check 'pdata' (see line 2636)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4461 rtw_dbg_port() error: we previously assumed 'pregpriv' could be null (see line 4453)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4473 rtw_dbg_port() error: we previously assumed 'pregpriv' could be null (see line 4469)
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch reports the following:
drivers/staging/rtl8821ae/rtl8821ae/hw.c:153 _rtl8821ae_set_fw_clock_on() info: ignoring unreachable code.

Upon investigation, the code in this region has the capability of creating
an infinite loop.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a few lines in this driver that depend on a macro
CONFIG_BT_COEXIST. But there's no Kconfig symbol of that name nor is
there a preprocessor define for that string. So remove these lines.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In this conditional statement, if (chan < 16), but the instruction passed
in data[0] is INSN_CONFIG_DIO_QUERY, the function does not return early,
but the else-branch does not get executed either.  As a result, mask
would be used uninitialized in the next line.  We want
comedi_dio_insn_config() to use a chan_mask based on the chanspec for the
INSN_CONFIG_DIO_QUERY instruction, so mask should be initialized to 0.
Then, if instead the instruction is INSN_CONFIG_DIO_{INPUT,OUTPUT}, we
return an error if (chan < 16) as these are invalid instructions for
ports 0 and 1, or update the mask otherwise, so all the io_bits are
modified for port 2.  This ensures that mask is always initialized by the
time it is used.
Signed-off-by: NChase Southwood <chase.southwood@yahoo.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Set TIF_MEMDIE tsk_thread flag before send kill signal to the
selected thread. This is to fit a usual code sequence and avoid
potential race issue.
Signed-off-by: NWeijie Yang <weijie.yang@samsung.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixed spelling typo within lustre/lustre/obdclass.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>