Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 17 2月, 2006 1 次提交
  3. 16 2月, 2006 3 次提交
    • H
      [IA64] support panic_on_oops sysctl · b05de01a
      由 Horms 提交于 
      Trivial port of this feature from i386
As it stands, panic_on_oops but does nothing on ia64
Signed-Off-By: NHorms <horms@verge.net.au>
Signed-off-by: NTony Luck <tony.luck@intel.com>
      b05de01a
    • H
      [IA64] ia64: simplify and fix udelay() · defbb2c9
      由 hawkes@sgi.com 提交于 
      The original ia64 udelay() was simple, but flawed for platforms without
synchronized ITCs:  a preemption and migration to another CPU during the
while-loop likely resulted in too-early termination or very, very
lengthy looping.

The first fix (now in 2.6.15) broke the delay loop into smaller,
non-preemptible chunks, reenabling preemption between the chunks.  This
fix is flawed in that the total udelay is computed to be the sum of just
the non-premptible while-loop pieces, i.e., not counting the time spent
in the interim preemptible periods.  If an interrupt or a migration
occurs during one of these interim periods, then that time is invisible
and only serves to lengthen the effective udelay().

This new fix backs out the current flawed fix and returns to a simple
udelay(), fully preemptible and interruptible.  It implements two simple
alternative udelay() routines:  one a default generic version that uses
ia64_get_itc(), and the other an sn-specific version that uses that
platform's RTC.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
      defbb2c9
    • A
      [IA64] Remove duplicate EXPORT_SYMBOLs · 50d8e590
      由 Andreas Schwab 提交于 
      Remove symbol exports from ia64_ksyms.c that are already exported in
lib/string.c.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>
      50d8e590
  5. 15 2月, 2006 2 次提交
  7. 10 2月, 2006 1 次提交
  9. 09 2月, 2006 1 次提交
  11. 08 2月, 2006 3 次提交
  13. 07 2月, 2006 1 次提交
  15. 04 2月, 2006 1 次提交
    • Z
      [PATCH] Export cpu topology in sysfs · 69dcc991
      由 Zhang, Yanmin 提交于 
      The patch implements cpu topology exportation by sysfs.

Items (attributes) are similar to /proc/cpuinfo.

1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
	represent the physical package id of  cpu X;
2) /sys/devices/system/cpu/cpuX/topology/core_id:
	represent the cpu core id to cpu X;
3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
	represent the thread siblings to cpu X in the same core;
4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
	represent the thread siblings to cpu X in the same physical package;

To implement it in an architecture-neutral way, a new source file,
driver/base/topology.c, is to export the 5 attributes.

If one architecture wants to support this feature, it just needs to
implement 4 defines, typically in file include/asm-XXX/topology.h.
The 4 defines are:
#define topology_physical_package_id(cpu)
#define topology_core_id(cpu)
#define topology_thread_siblings(cpu)
#define topology_core_siblings(cpu)

The type of **_id is int.
The type of siblings is cpumask_t.

To be consistent on all architectures, the 4 attributes should have
deafult values if their values are unavailable. Below is the rule.

1) physical_package_id: If cpu has no physical package id, -1 is the
default value.

2) core_id: If cpu doesn't support multi-core, its core id is 0.

3) thread_siblings: Just include itself, if the cpu doesn't support
HT/multi-thread.

4) core_siblings: Just include itself, if the cpu doesn't support
multi-core and HT/Multi-thread.

So be careful when declaring the 4 defines in include/asm-XXX/topology.h.

If an attribute isn't defined on an architecture, it won't be exported.

Thank Nathan, Greg, Andi, Paul and Venki.

The patch provides defines for i386/x86_64/ia64.
Signed-off-by: NZhang, Yanmin <yanmin.zhang@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      69dcc991
  17. 03 2月, 2006 1 次提交
  19. 25 1月, 2006 2 次提交
  21. 20 1月, 2006 2 次提交
  23. 17 1月, 2006 1 次提交
  25. 14 1月, 2006 5 次提交
  27. 13 1月, 2006 4 次提交
    • A
      [PATCH] ia64: task_pt_regs() · 6450578f
      由 Al Viro 提交于 
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6450578f
    • A
      [PATCH] ia64: task_thread_info() · ab03591d
      由 Al Viro 提交于 
      on ia64 thread_info is at the constant offset from task_struct and stack
is embedded into the same beast.  Set __HAVE_THREAD_FUNCTIONS, made
task_thread_info() just add a constant.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      ab03591d
    • A
      [PATCH] scheduler cache-hot-autodetect · 198e2f18
      由 akpm@osdl.org 提交于 
      )

From: Ingo Molnar <mingo@elte.hu>

This is the latest version of the scheduler cache-hot-auto-tune patch.

The first problem was that detection time scaled with O(N^2), which is
unacceptable on larger SMP and NUMA systems. To solve this:

- I've added a 'domain distance' function, which is used to cache
  measurement results. Each distance is only measured once. This means
  that e.g. on NUMA distances of 0, 1 and 2 might be measured, on HT
  distances 0 and 1, and on SMP distance 0 is measured. The code walks
  the domain tree to determine the distance, so it automatically follows
  whatever hierarchy an architecture sets up. This cuts down on the boot
  time significantly and removes the O(N^2) limit. The only assumption
  is that migration costs can be expressed as a function of domain
  distance - this covers the overwhelming majority of existing systems,
  and is a good guess even for more assymetric systems.

  [ People hacking systems that have assymetries that break this
    assumption (e.g. different CPU speeds) should experiment a bit with
    the cpu_distance() function. Adding a ->migration_distance factor to
    the domain structure would be one possible solution - but lets first
    see the problem systems, if they exist at all. Lets not overdesign. ]

Another problem was that only a single cache-size was used for measuring
the cost of migration, and most architectures didnt set that variable
up. Furthermore, a single cache-size does not fit NUMA hierarchies with
L3 caches and does not fit HT setups, where different CPUs will often
have different 'effective cache sizes'. To solve this problem:

- Instead of relying on a single cache-size provided by the platform and
  sticking to it, the code now auto-detects the 'effective migration
  cost' between two measured CPUs, via iterating through a wide range of
  cachesizes. The code searches for the maximum migration cost, which
  occurs when the working set of the test-workload falls just below the
  'effective cache size'. I.e. real-life optimized search is done for
  the maximum migration cost, between two real CPUs.

  This, amongst other things, has the positive effect hat if e.g. two
  CPUs share a L2/L3 cache, a different (and accurate) migration cost
  will be found than between two CPUs on the same system that dont share
  any caches.

(The reliable measurement of migration costs is tricky - see the source
for details.)

Furthermore i've added various boot-time options to override/tune
migration behavior.

Firstly, there's a blanket override for autodetection:

	migration_cost=1000,2000,3000

will override the depth 0/1/2 values with 1msec/2msec/3msec values.

Secondly, there's a global factor that can be used to increase (or
decrease) the autodetected values:

	migration_factor=120

will increase the autodetected values by 20%. This option is useful to
tune things in a workload-dependent way - e.g. if a workload is
cache-insensitive then CPU utilization can be maximized by specifying
migration_factor=0.

I've tested the autodetection code quite extensively on x86, on 3
P3/Xeon/2MB, and the autodetected values look pretty good:

Dual Celeron (128K L2 cache):

 ---------------------
 migration cost matrix (max_cache_size: 131072, cpu: 467 MHz):
 ---------------------
           [00]    [01]
 [00]:     -     1.7(1)
 [01]:   1.7(1)    -
 ---------------------
 cacheflush times [2]: 0.0 (0) 1.7 (1784008)
 ---------------------

Here the slow memory subsystem dominates system performance, and even
though caches are small, the migration cost is 1.7 msecs.

Dual HT P4 (512K L2 cache):

 ---------------------
 migration cost matrix (max_cache_size: 524288, cpu: 2379 MHz):
 ---------------------
           [00]    [01]    [02]    [03]
 [00]:     -     0.4(1)  0.0(0)  0.4(1)
 [01]:   0.4(1)    -     0.4(1)  0.0(0)
 [02]:   0.0(0)  0.4(1)    -     0.4(1)
 [03]:   0.4(1)  0.0(0)  0.4(1)    -
 ---------------------
 cacheflush times [2]: 0.0 (33900) 0.4 (448514)
 ---------------------

Here it can be seen that there is no migration cost between two HT
siblings (CPU#0/2 and CPU#1/3 are separate physical CPUs). A fast memory
system makes inter-physical-CPU migration pretty cheap: 0.4 msecs.

8-way P3/Xeon [2MB L2 cache]:

 ---------------------
 migration cost matrix (max_cache_size: 2097152, cpu: 700 MHz):
 ---------------------
           [00]    [01]    [02]    [03]    [04]    [05]    [06]    [07]
 [00]:     -    19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)
 [01]:  19.2(1)    -    19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)
 [02]:  19.2(1) 19.2(1)    -    19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)
 [03]:  19.2(1) 19.2(1) 19.2(1)    -    19.2(1) 19.2(1) 19.2(1) 19.2(1)
 [04]:  19.2(1) 19.2(1) 19.2(1) 19.2(1)    -    19.2(1) 19.2(1) 19.2(1)
 [05]:  19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)    -    19.2(1) 19.2(1)
 [06]:  19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)    -    19.2(1)
 [07]:  19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)    -
 ---------------------
 cacheflush times [2]: 0.0 (0) 19.2 (19281756)
 ---------------------

This one has huge caches and a relatively slow memory subsystem - so the
migration cost is 19 msecs.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Cc: <wilder@us.ibm.com>
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      198e2f18
    • I
      [PATCH] sched: add cacheflush() asm · 4dc7a0bb
      由 Ingo Molnar 提交于 
      Add per-arch sched_cacheflush() which is a write-back cacheflush used by
the migration-cost calibration code at bootup time.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      4dc7a0bb
  29. 12 1月, 2006 2 次提交
  31. 11 1月, 2006 1 次提交
  33. 09 1月, 2006 4 次提交
    • B
      [PATCH] /dev/mem: validate mmap requests · 80851ef2
      由 Bjorn Helgaas 提交于 
      Add a hook so architectures can validate /dev/mem mmap requests.

This is analogous to validation we already perform in the read/write
paths.

The identity mapping scheme used on ia64 requires that each 16MB or
64MB granule be accessed with exactly one attribute (write-back or
uncacheable).  This avoids "attribute aliasing", which can cause a
machine check.

Sample problem scenario:
  - Machine supports VGA, so it has uncacheable (UC) MMIO at 640K-768K
  - efi_memmap_init() discards any write-back (WB) memory in the first granule
  - Application (e.g., "hwinfo") mmaps /dev/mem, offset 0
  - hwinfo receives UC mapping (the default, since memmap says "no WB here")
  - Machine check abort (on chipsets that don't support UC access to WB
    memory, e.g., sx1000)

In the scenario above, the only choices are
  - Use WB for hwinfo mmap.  Can't do this because it causes attribute
    aliasing with the UC mapping for the VGA MMIO space.
  - Use UC for hwinfo mmap.  Can't do this because the chipset may not
    support UC for that region.
  - Disallow the hwinfo mmap with -EINVAL.  That's what this patch does.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      80851ef2
    • A
      [PATCH] remove gcc-2 checks · a1365647
      由 Andrew Morton 提交于 
      Remove various things which were checking for gcc-1.x and gcc-2.x compilers.

From: Adrian Bunk <bunk@stusta.de>

    Some documentation updates and removes some code paths for gcc < 3.2.
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      a1365647
    • C
      [PATCH] use ptrace_get_task_struct in various places · 6b9c7ed8
      由 Christoph Hellwig 提交于 
      The ptrace_get_task_struct() helper that I added as part of the ptrace
consolidation is useful in variety of places that currently opencode it.
Switch them to the common helpers.

Add a ptrace_traceme() helper that needs to be explicitly called, and simplify
the ptrace_get_task_struct() interface.  We don't need the request argument
now, and we return the task_struct directly, using ERR_PTR() for error
returns.  It's a bit more code in the callers, but we have two sane routines
that do one thing well now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6b9c7ed8
    • C
      [PATCH] Swap Migration V5: sys_migrate_pages interface · 39743889
      由 Christoph Lameter 提交于 
      sys_migrate_pages implementation using swap based page migration

This is the original API proposed by Ray Bryant in his posts during the first
half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org.

The intent of sys_migrate is to migrate memory of a process.  A process may
have migrated to another node.  Memory was allocated optimally for the prior
context.  sys_migrate_pages allows to shift the memory to the new node.

sys_migrate_pages is also useful if the processes available memory nodes have
changed through cpuset operations to manually move the processes memory.  Paul
Jackson is working on an automated mechanism that will allow an automatic
migration if the cpuset of a process is changed.  However, a user may decide
to manually control the migration.

This implementation is put into the policy layer since it uses concepts and
functions that are also needed for mbind and friends.  The patch also provides
a do_migrate_pages function that may be useful for cpusets to automatically
move memory.  sys_migrate_pages does not modify policies in contrast to Ray's
implementation.

The current code here is based on the swap based page migration capability and
thus is not able to preserve the physical layout relative to it containing
nodeset (which may be a cpuset).  When direct page migration becomes available
then the implementation needs to be changed to do a isomorphic move of pages
between different nodesets.  The current implementation simply evicts all
pages in source nodeset that are not in the target nodeset.

Patch supports ia64, i386 and x86_64.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      39743889
  35. 06 1月, 2006 1 次提交
  37. 28 12月, 2005 1 次提交
  39. 17 12月, 2005 3 次提交