- 18 5月, 2015 4 次提交
-
-
由 Devesh Sharma 提交于
If the adapter ports are in PFC mode and VLAN is not configured, use vlan tag 0 for RoCE traffic. Also, log an advisory message in system logs. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Devesh Sharma 提交于
Don't move QP to error state, if QP is in reset state during QP destroy operation. Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Devesh Sharma 提交于
Detect when Event Queue (EQ) becomes full and print a warning message. Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Selvin Xavier 提交于
Changing the destroy sequence of mailbox queue and event queues. FW expects mailbox queue to be destroyed before desroying the EQs. Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 13 5月, 2015 3 次提交
-
-
由 Joe Perches 提交于
These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause bad logging output so remove them. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Mike Marciniszyn 提交于
Commit d4988623 ("IB/qib: use arch_phys_wc_add()") adjusted mtrr inititialization to use the new interface. Unfortunately, the new interface returns a signed value and the patch tested the unsigned wc_cookie. Fix the issue by changing the type of wc_cookie to int. For the success case the ret left at zero to avoid a warning from the caller. For failure wc_cookie is used as the ret. Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tatyana Nikolova 提交于
The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute. Without this fix parsing of the nlmsg by the userspace port mapper service fails because of unknown attribute length, causing the port mapper service not to register the client, which has sent the nlmsg. Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com> Cc: <stable@vger.kernel.org> #v3.16 Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 12 5月, 2015 3 次提交
-
-
由 Doug Ledford 提交于
Linus prefers kernel.org repos to github repos for security. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Steve Wise 提交于
For listening endpoints bound to the wildcard address, we need to pass the wildcard address mapping to iwpm_get_remote_info() instead of the mapped address of the new child connection. Without this fix, and with iwarp port mapping enabled, each iw_cxgb4 connection that is spawned from a listening endpoint bound to the wildcard address, will generate an annoying dmesg entry about failing to find the remote address mapping info, and the connection state displayed in debugfs under /sys/kernel/debug/iw_cxgb4/<pci-slot-no>/eps will not have the peer's address/port mapping info. The connection still works though. Fixes: 5b6b8fe6 ("RDMA/cxgb4: Report the actual address of the remote connecting peer") Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Reviewed-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Nicholas Mc Guire 提交于
Using an element of a struct as the address for the memcpy of the whole struct may introduce a buffer overflow and does not help readability either simply pass the real thing as first argument to memcpy. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 06 5月, 2015 6 次提交
-
-
由 Doug Ledford 提交于
Since Roland stepped down, the community asked me to take his place, and the nomination was followed by sufficient votes and no dissensions that we can move forward with the change. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yann Droneaud 提交于
Most headers for InfiniBand/RDMA are located under include/rdma/ and include/uapi/rdma. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
See also patch "IPoIB/cm: Add connected mode support for devices without SRQs" (commit ID 68e995a2). Detected by smatch. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hariprasad S 提交于
Remove these log messages in favor of per-endpoint counters as well as device-global counters that can be inspected via debugfs. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 David Ahern 提交于
Addresses the following kernel logs seen during boot of sparc systems: Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Signed-off-by: NDavid Ahern <david.ahern@oracle.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Honggang LI 提交于
Signed-off-by: NHonggang Li <honli@redhat.com> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 05 5月, 2015 12 次提交
-
-
由 Luis R. Rodriguez 提交于
This driver already makes use of ioremap_wc() on PIO buffers, so convert it to use arch_phys_wc_add(). The qib driver uses a mmap() special case for when PAT is not used, this behaviour used to be determined with a module parameter but since we have been asked to just remove that module parameter this checks for the WC cookie, if not set we can assume PAT was used. If its set we do what we used to do for the mmap for when MTRR was enabled. The removal of the module parameter is OK given that Andy notes that even if users of module parameter are still around it will not prevent loading of the module on recent kernels. Cc: Doug Ledford <dledford@redhat.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: konrad.wilk@oracle.com Cc: ville.syrjala@linux.intel.com Cc: david.vrabel@citrix.com Cc: jbeulich@suse.com Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: infinipath@intel.com Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xensource.com Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Luis R. Rodriguez 提交于
There is no good reason not to, we eventually delete it as well. Cc: Toshi Kani <toshi.kani@hp.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Guy Shapiro 提交于
While unmapping an ODP writable page, the dirty bit of the page is set. In order to do so, the head of the compound page is found. Currently, the compound head is found even on non-writable pages, where it is never used, leading to unnecessary cpu barrier that impacts performance. This patch moves the search for the compound head to be done only when needed. Signed-off-by: NGuy Shapiro <guysh@mellanox.com> Acked-by: NShachar Raindel <raindel@mellanox.com> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Guy Shapiro 提交于
Currently, while mapping or unmapping pages for ODP, the umem mutex is locked and unlocked once for each page. Such lock/unlock operation take few tens to hundreds of nsecs. This makes a significant impact when mapping or unmapping few MBs of memory. To avoid this, the mutex should be locked only once per operation, and not per page. Signed-off-by: NGuy Shapiro <guysh@mellanox.com> Acked-by: NShachar Raindel <raindel@mellanox.com> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Steve Wise 提交于
Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper Also setup the passive side endpoint to correctly display the actual and mapped addresses for the new connection. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tatyana Nikolova 提交于
Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper and report the address info to the user space application at the time of connection establishment Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tatyana Nikolova 提交于
RDMA/core: Enable the iWarp Port Mapper to provide the actual address of the connecting peer to its clients Add functionality to enable the port mapper on the passive side to provide to its clients the actual (non-mapped) ip/tcp address information of the connecting peer 1) Adding remote_info_cb() to process the address info of the connecting peer The address info is provided by the user space port mapper service when the connection is initiated by the peer 2) Adding a hash list to store the remote address info 3) Adding functionality to add/remove the remote address info After the info has been provided to the port mapper client, it is removed from the hash list Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hariprasad S 提交于
Currently the iw_cxgb4 implementation requires the qp and cq qid densities to match as well as the qp and cq id ranges. So fail a device open if the device configuration doesn't meet the requirements. The reason for these restictions has to do with the fact that IQ qid X has a UGTS register in the same bar2 page as EQ qid X. Thus both qids need to be allocated to the same user process for security reasons. The logic that does this (the qpid allocator in iw_cxgb4/resource.c) handles this but requires the above restrictions. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hariprasad S 提交于
For T5, we must not use the kdb/kgts registers, in order avoid db drops under extreme loads. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hariprasad S 提交于
- get_dma_mr() was using ~0UL which is should be ~0ULL. This causes the DMA MR to get setup incorrectly in hardware. - wr_log_show() needed a 64b divide function div64_u64() instead of doing division directly. - fixed warnings about recasting a pointer to a u64 Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hariprasad S 提交于
Cleanup macros and register defines for consistency Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jason Gunthorpe 提交于
When accepting a new IPv4 connect to an IPv6 socket, the CMA tries to canonize the address family to IPv4, but does not properly process the listening sockaddr to get the listening port, and does not properly set the address family of the canonized sockaddr. Fixes: e51060f0 ("IB: IP address based RDMA connection manager") Cc: <stable@vger.kernel.org> Reported-By: NYotam Kenneth <yotamke@mellanox.com> Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 04 5月, 2015 8 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
-
https://github.com/markyzq/kernel-drm-rockchip由 Dave Airlie 提交于
one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
-
- 03 5月, 2015 3 次提交
-
-
由 Jan Kara 提交于
The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NEric Sandeen <sandeen@redhat.com>
-
由 Davide Italiano 提交于
fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by: NDavide Italiano <dccitaliano@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Lukas Czerner 提交于
Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 02 5月, 2015 1 次提交
-
-
由 Chanho Park 提交于
This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d8 and commit f542fb. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: NChanho Park <chanho61.park@samsung.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-