- 03 12月, 2015 21 次提交
-
-
由 Jarod Wilson 提交于
Don't open-code it. CC: Solarflare linux maintainers <linux-net-drivers@solarflare.com> CC: Shradha Shah <sshah@solarflare.com> CC: netdev@vger.kernel.org Signed-off-by: NJarod Wilson <jarod@redhat.com> Acked-by: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If tcp_send_ack() can not allocate skb, we properly handle this and setup a timer to try later. Use __GFP_NOWARN to avoid polluting syslog in the case host is under memory pressure, so that pertinent messages are not lost under a flood of useless information. sk_gfp_atomic() can use its gfp_mask argument (all callers currently were using GFP_ATOMIC before this patch) We rename sk_gfp_atomic() to sk_gfp_mask() to clearly express this function now takes into account its second argument (gfp_mask) Note that when tcp_transmit_skb() is called with clone_it set to false, we do not attempt memory allocations, so can pass a 0 gfp_mask, which most compilers can emit faster than a non zero or constant value. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'hv_netvsc-less-headroom' K. Y. Srinivasan says: ==================== hv_netvsc: Eliminate the additional head room In an attempt to avoid having to allocate memory on the send path, the netvsc driver was requesting additional head room so that both rndis header and the netvsc packet (the state that had to persist) could be placed in the skb. Since the amount of head room requested was exceeding the default head room as set in LL_MAX_HEADER, we were forcing a reallocation of skb. With this patch-set, I have reduced the size of the netvsc packet to less than 20 bytes and with this reduction we don't need to ask for any additional headroom. We place the rndis header in the skb head room and we place the netvsc packet in control buffer area in the skb. V2: - Addressed review comments: - Eliminated more fields from netvsc packet structure. V3: - Fixed a typo in patch: hv_netvsc: Don't ask for additional head room in the skb. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate vlan_tci from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate status from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate xmit_more from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate completion_func from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate is_data_pkt from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate send_completion_tid from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate page_buf from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
Packet scheduler guarantees there won't be multiple senders for the same queue and as we use q_idx for multi_send_data the spinlock is redundant. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
The rndis header is 116 bytes big and can be placed in the default head room that will be available in the skb. Since the netvsc packet is less than 48 bytes, we can use the skb control buffer for the netvsc packet. With these changes we don't need to ask for additional head room. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate send_completion_ctx from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate send_completion from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminatte the data field from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate rndis_msg pointer from hv_netvsc_packet structure. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate the channel field in hv_netvsc_packet structure. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Rearrange the elements of struct hv_negtvsc_packet for optimal layout - eliminate unnecessary padding. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
As part of reducing the size of the hv_netvsc_packet, resize some of the variables based on their usage. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-12-01 This series contains updates to i40e and i40evf only. Helin adds new fields to i40e_vsi to store user configured RSS config data and the code to use it. Also renamed RSS items to clarify functionality and scope to users. Fixed a confusing kernel message of enabling RSS size by reporting it together with the hardware maximum RSS size. Anjali fixes the issue of forcing writeback too often causing us to not benefit from NAPI. Jesse adds a prefetch for data early in the transmit path to help immensely for pktgen and forwarding workloads. Fixed the i40e driver that was possibly sleeping inside critical section of code. Carolyn fixes an issue where adminq init failures always provided a message that NVM was newer than expected, when this is not always the case for init_adminq failures. Fixed by adding a check for that specific error condition and a different helpful message otherwise. Mitch fixes error message by telling the user which VF is being naughty, rather than making them guess. Updated the queue_vector array from a statically-sized member of the adapter structure, to a dynamically-allocated and -sized array. This reduces the size of the adapter structure and allows us to support any number of queue vectors in the future without changing the code. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2015 19 次提交
-
-
由 Jesse Brandeburg 提交于
With the final edition of the patches to remove sleeps from the driver's entry points, the grab_rtnl argument is no longer needed, so partially revert the commit that added it. Change-ID: Ib9778476242586cc9e58b670f5f48d415cb59003 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver was being called by VLAN, bonding, teaming operations that expected to be able to hold locks like rcu_read_lock(). This causes the driver to be held to the requirement to not sleep, and was found by the kernel debug options for checking sleep inside critical section, and the locking validator. Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Bump. Change-ID: I00ebbb2e5e5572f947502b8f6db4d94f666d6b14 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Instead of awkwardly keeping a fixed array of pointers in the adapter struct and then allocating ring structs individually, just keep a single pointer and allocate a single blob for the arrays. This simplifies code, shrinks the adapter structure, and future-proofs the driver by not limiting the number of rings we can handle. Change-ID: I31334ff911a6474954232cfe4bc98ccca3c769ff Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Change the queue_vector array from a statically-sized member of the adapter structure to a dynamically-allocated and -sized array. This reduces the size of the adapter structure, and allows us to support any number of queue vectors in the future without changing the code. Change-ID: I08dc622cb2f2ad01e832e51c1ad9b86524730693 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If, upon a midnight dreary, the PF returns ERR_PARAM when the VF is requesting resources, that's fatal. Either the firmware or NVM is badly, badly misconfigured, or this VF has been disabled due to a previous VF driver sending a bunch of bogus messages. Either way, there is no recovery from this. Don't ponder weak and weary, just quit. Change-ID: I09d9f16cc4ee7fec3b57646a289d33838c1c5bf5 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If we get an invalid message from a VF, we should tell the user which VF is being naughty, rather than making them guess. Change-ID: I9252cef7baea3d8584043ed6ff12619a94e2f99c Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Helin Zhang 提交于
This patch fixes the confusing kernel message of enabled RSS size, by reporting it together with the hardware maximum RSS size. Change-ID: I64864dbfbc13beccc180a7871680def1f3d5a339 Signed-off-by: NHelin Zhang <helin.zhang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes an issue where adminq init failures always provided a message that NVM was newer than expected. This is not always the case for init_adminq failures. Without this patch, if adminq init fails for any reason, newer NVM message would be given. This problem is fixed by adding a check for that specific error condition and a different hopefully helpful message otherwise. Change-ID: Iaeaebee4e398989eae40bb70f943ab66a3a521a5 Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Helin Zhang 提交于
This patch adds new fields to i40e_vsi to store user configured RSS config data and code to use it. Change-ID: Ic5d3db8d9df52182b560248f8cdca9c5c7546879 Signed-off-by: NHelin Zhang <helin.zhang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Helin Zhang 提交于
There are two ways to get RSS, this patch implements two functions with the same input parameters, and creates a more generic function for getting RSS configuration. Change-ID: I12d3b712c21455d47dd0a5aae58fc9b7c680db59 Signed-off-by: NHelin Zhang <helin.zhang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Helin Zhang 提交于
There are two ways to configure RSS, this patch adjusts those two functions with the same input parameters, and creates a more generic function for configuring RSS. Change-ID: Iace73bdeba4831909979bef221011060ab327f71 Signed-off-by: NHelin Zhang <helin.zhang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Helin Zhang 提交于
This patch renames old VF adapter specific RSS function to clarify its scope. Change-ID: Ie5253083a44c677ebb7709a8a3a18402ad2dc6a6 Signed-off-by: NHelin Zhang <helin.zhang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Issue a prefetch for data early in the transmit path. This should not be generally needed for Tx traffic, but it helps immensely for pktgen workloads and should help for forwarding workloads as well. Change-ID: Iefee870c20599e0c4240e1d8637e4f16b625f83a Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This patch fixes the issue of forcing WB too often causing us to not benefit from NAPI. Without this patch we were forcing WB/arming interrupt too often taking away the benefits of NAPI and causing a performance impact. With this patch we disable force WB in the clean routine for X710 and XL710 adapters. X722 adapters do not enable interrupt to force a WB and benefit from WB_ON_ITR and hence force WB is left enabled for those adapters. For XL710 and X710 adapters if we have less than 4 packets pending a software Interrupt triggered from service task will force a WB. This patch also changes the conditions for setting RS bit as described in code comments. This optimizes when the HW does a tail bump amd when it does a WB. It also optimizes when we do a wmb. Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Helin Zhang 提交于
This patch renames rss_size to alloc_rss_size in i40e_pf, which is clearer and avoids confusion. It also adds comments to the other related structure members to help clarify usage. Change-ID: Ia90090609d006ab589cb639975bb8a0af795d16f Signed-off-by: NHelin Zhang <helin.zhang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Helin Zhang 提交于
This patch adds new fields to i40e_vsi to store user configured RSS config data and code to use it. Signed-off-by: NHelin Zhang <helin.zhang@intel.com> Change-ID: I73886469dca9e9f6b16d842182a87f3f4009f95d Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Arnd Bergmann 提交于
The 'sc' ISDN driver relies on using readl() to access ISA I/O memory. This has been deprecated and produced warnings since linux-2.3.23, disabled by default since 2.4.10 and finally removed in 2.6.5. I found this because the compiling the driver for ARM produces a warning: In file included from ../drivers/isdn/sc/includes.h:8:0, from ../drivers/isdn/sc/init.c:13: ../arch/arm/include/asm/io.h:115:21: note: expected 'const volatile void *' but argument is of type 'long unsigned int' It is pretty clear that this driver has not been used for a long time and there is no point fixing it now, so let's remove it. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
For GMAC newer than 3.40a there is a new register (Reg_9) that provides the status of all modules of the transmit and receive paths and FIFO status. These can be exposed via ethtool. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-