Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 2月, 2009 2 次提交
    • A
      x86, mce: reinitialize per cpu features on resume · 6ec68bff
      由 Andi Kleen 提交于 
      Impact: Bug fix

This fixes a long standing bug in the machine check code. On resume the
boot CPU wouldn't get its vendor specific state like thermal handling
reinitialized. This means the boot cpu wouldn't ever get any thermal
events reported again.

Call the respective initialization functions on resume

v2: Remove ancient init because they don't have a resume device anyways.
    Pointed out by Thomas Gleixner.
v3: Now fix the Subject too to reflect v2 change
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      6ec68bff
    • P
      x86, rcu: fix strange load average and ksoftirqd behavior · bf51935f
      由 Paul E. McKenney 提交于 
      Damien Wyart reported high ksoftirqd CPU usage (20%) on an
otherwise idle system.

The function-graph trace Damien provided:

>   799.521187 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521371 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521555 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521738 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521934 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522068 |   1)  ksoftir-2324  |               |                rcu_check_callbacks() {
>   799.522208 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522392 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522575 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522759 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522956 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523074 |   1)  ksoftir-2324  |               |                  rcu_check_callbacks() {
>   799.523214 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523397 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523579 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523762 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523960 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524079 |   1)  ksoftir-2324  |               |                  rcu_check_callbacks() {
>   799.524220 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524403 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524587 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524770 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> [ . . . ]

Shows rcu_check_callbacks() being invoked way too often. It should be called
once per jiffy, and here it is called no less than 22 times in about
3.5 milliseconds, meaning one call every 160 microseconds or so.

Why do we need to call rcu_pending() and rcu_check_callbacks() from the
idle loop of 32-bit x86, especially given that no other architecture does
this?

The following patch removes the call to rcu_pending() and
rcu_check_callbacks() from the x86 32-bit idle loop in order to
reduce the softirq load on idle systems.
Reported-by: NDamien Wyart <damien.wyart@free.fr>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      bf51935f
  3. 15 2月, 2009 2 次提交
    • T
      x86, vm86: fix preemption bug · be716615
      由 Thomas Gleixner 提交于 
      Commit 3d2a71a5 ("x86, traps: converge
do_debug handlers") changed the preemption disable logic of do_debug()
so vm86_handle_trap() is called with preemption disabled resulting in:

 BUG: sleeping function called from invalid context at include/linux/kernel.h:155
 in_atomic(): 1, irqs_disabled(): 0, pid: 3005, name: dosemu.bin
 Pid: 3005, comm: dosemu.bin Tainted: G        W  2.6.29-rc1 #51
 Call Trace:
  [<c050d669>] copy_to_user+0x33/0x108
  [<c04181f4>] save_v86_state+0x65/0x149
  [<c0418531>] handle_vm86_trap+0x20/0x8f
  [<c064e345>] do_debug+0x15b/0x1a4
  [<c064df1f>] debug_stack_correct+0x27/0x2c
  [<c040365b>] sysenter_do_call+0x12/0x2f
 BUG: scheduling while atomic: dosemu.bin/3005/0x10000001

Restore the original calling convention and reenable preemption before
calling handle_vm86_trap().
Reported-by: NMichal Suchanek <hramrach@centrum.cz>
Cc: stable@kernel.org
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      be716615
    • C
      x86, olpc: fix model detection without OFW · e49590b6
      由 Chris Ball 提交于 
      Impact: fix "garbled display, laptop is unusable" bug

Commit e51a1ac2 ("x86, olpc: fix endian
bug in openfirmware workaround") breaks model comparison on OLPC; the value
0xc2 needs to be scaled up by olpc_board().

The pre-patch version was wrong, but accidentally worked anyway
(big-endian 0xc2 is big enough to satisfy all other board revisions,
but little endian 0xc2 is not).
Signed-off-by: NChris Ball <cjb@laptop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NAndres Salomon <dilinger@queued.net>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e49590b6
  5. 13 2月, 2009 4 次提交
    • J
      x86, hpet: fix for LS21 + HPET = boot hang · b13e2464
      由 john stultz 提交于 
      Between 2.6.23 and 2.6.24-rc1 a change was made that broke IBM LS21
systems that had the HPET enabled in the BIOS, resulting in boot hangs
for x86_64.

Specifically commit b8ce3359, which
merges the i386 and x86_64 HPET code.

Prior to this commit, when we setup the HPET timers in x86_64, we did
the following:

	hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
                    HPET_TN_32BIT, HPET_T0_CFG);

However after the i386/x86_64 HPET merge, we do the following:

	cfg = hpet_readl(HPET_Tn_CFG(timer));
	cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
			HPET_TN_SETVAL | HPET_TN_32BIT;
	hpet_writel(cfg, HPET_Tn_CFG(timer));

However on LS21s with HPET enabled in the BIOS, the HPET_T0_CFG register
boots with Level triggered interrupts (HPET_TN_LEVEL) enabled. This
causes the periodic interrupt to be not so periodic, and that results in
the boot time hang I reported earlier in the delay calibration.

My fix: Always disable HPET_TN_LEVEL when setting up periodic mode.
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b13e2464
    • T
      x86: CPA avoid repeated lazy mmu flush · 7ad9de6a
      由 Thomas Gleixner 提交于 
      Impact: Flush the lazy MMU only once

Pending mmu updates only need to be flushed once to bring the
in-memory pagetable state up to date.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      7ad9de6a
    • T
      x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context · 34b0900d
      由 Thomas Gleixner 提交于 
      Impact: Catch cases where lazy MMU state is active in a preemtible context

arch_flush_lazy_mmu_cpu() has been changed to disable preemption so
the checks in enter/leave will never trigger. Put the preemtible()
check into arch_flush_lazy_mmu_cpu() to catch such cases.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      34b0900d
    • J
      x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption · d85cf93d
      由 Jeremy Fitzhardinge 提交于 
      Impact: avoid access to percpu vars in preempible context

They are intended to be used whenever there's the possibility
that there's some stale state which is going to be overwritten
with a queued update, or to force a state change when we may be
in lazy mode.  Either way, we could end up calling it with
preemption enabled, so wrap the functions in their own little
preempt-disable section so they can be safely called in any
context (though preemption should never be enabled if we're actually
in a lazy state).

(Move out of line to avoid #include dependencies.)
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      d85cf93d
  7. 12 2月, 2009 2 次提交
  9. 11 2月, 2009 2 次提交
    • M
      x86, ptrace, mm: fix double-free on race · 9f339e70
      由 Markus Metzger 提交于 
      Ptrace_detach() races with __ptrace_unlink() if the traced task is
reaped while detaching. This might cause a double-free of the BTS
buffer.

Change the ptrace_detach() path to only do the memory accounting in
ptrace_bts_detach() and leave the buffer free to ptrace_bts_untrace()
which will be called from __ptrace_unlink().

The fix follows a proposal from Oleg Nesterov.
Reported-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9f339e70
    • O
      ptrace, x86: fix the usage of ptrace_fork() · 06eb23b1
      由 Oleg Nesterov 提交于 
      I noticed by pure accident we have ptrace_fork() and friends. This was
added by "x86, bts: add fork and exit handling", commit
bf53de90.

I can't test this, ds_request_bts() returns -EOPNOTSUPP, but I strongly
believe this needs the fix. I think something like this program

	int main(void)
	{
		int pid = fork();

		if (!pid) {
			ptrace(PTRACE_TRACEME, 0, NULL, NULL);
			kill(getpid(), SIGSTOP);
			fork();
		} else {
			struct ptrace_bts_config bts = {
				.flags = PTRACE_BTS_O_ALLOC,
				.size  = 4 * 4096,
			};

			wait(NULL);

			ptrace(PTRACE_SETOPTIONS, pid, NULL, PTRACE_O_TRACEFORK);
			ptrace(PTRACE_BTS_CONFIG, pid, &bts, sizeof(bts));
			ptrace(PTRACE_CONT, pid, NULL, NULL);

			sleep(1);
		}

		return 0;
	}

should crash the kernel.

If the task is traced by its natural parent ptrace_reparented() returns 0
but we should clear ->btsxxx anyway.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      06eb23b1
  11. 10 2月, 2009 2 次提交
    • C
      i8327: fix outb() parameter order · b52af409
      由 Clemens Ladisch 提交于 
      In i8237A_resume(), when resetting the DMA controller, the parameters to
dma_outb() were mixed up.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
[ cleaned up the file a tiny bit. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b52af409
    • T
      x86: fix math_emu register frame access · d315760f
      由 Tejun Heo 提交于 
      do_device_not_available() is the handler for #NM and it declares that
it takes a unsigned long and calls math_emu(), which takes a long
argument and surprisingly expects the stack frame starting at the zero
argument would match struct math_emu_info, which isn't true regardless
of configuration in the current code.

This patch makes do_device_not_available() take struct pt_regs like
other exception handlers and initialize struct math_emu_info with
pointer to it and pass pointer to the math_emu_info to math_emulate()
like normal C functions do.  This way, unless gcc makes a copy of
struct pt_regs in do_device_not_available(), the register frame is
correctly accessed regardless of kernel configuration or compiler
used.

This doesn't fix all math_emu problems but it at least gets it
somewhat working.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d315760f
  13. 09 2月, 2009 5 次提交
  15. 05 2月, 2009 5 次提交
  17. 04 2月, 2009 3 次提交
  19. 03 2月, 2009 13 次提交