Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 5月, 2014 2 次提交
  3. 26 3月, 2014 2 次提交
  5. 15 3月, 2014 1 次提交
  7. 23 2月, 2014 11 次提交
  9. 14 2月, 2014 1 次提交
  11. 23 11月, 2013 1 次提交
  13. 15 10月, 2013 1 次提交
    • R
      ahci: imx: setup power saving methods · 8b789d89
      由 Richard Zhu 提交于 
      In order to save power consumption as much as possible.

* Disable sata phy internal pll reference clock when sysetem enter
  into suspend mode, enable it after resume.

* Setup module parameter used to enable imx ahci test power down
  mode(PDDQ) or not, when there is no device detected on the port

* minor modifications:
  - The format of the copyright is changed, because that the original
    one can't pass fsl internal patch reivew without the character
    '(c)'.
  - Exports ahci_platform_ops and ahci_error_handler().

NOTE:
* The hot-plug can't be supported when PDDQ mode is ever enabled.

* module parameter usage how-to:
  - default: enable PDDQ mode when no device detected.
  - add "ahci-imx.hotplug=1" into kernel command line if your don't
    want to enable PDDQ mode when no device detected on the port.

tj: Slightly updated description and comments.
Signed-off-by: NRichard Zhu <r65037@freescale.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      8b789d89
  15. 08 10月, 2013 1 次提交
  17. 18 6月, 2013 1 次提交
  19. 04 1月, 2013 1 次提交
    • G
      Drivers: ata: remove __dev* attributes. · 0ec24914
      由 Greg Kroah-Hartman 提交于 
      CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0ec24914
  21. 14 12月, 2012 1 次提交
  23. 03 12月, 2012 4 次提交
  25. 16 11月, 2012 1 次提交
  27. 13 9月, 2012 2 次提交
  29. 26 7月, 2012 1 次提交
  31. 04 5月, 2012 1 次提交
  33. 14 3月, 2012 1 次提交
  35. 09 1月, 2012 1 次提交
  37. 17 11月, 2011 1 次提交
  39. 09 11月, 2011 1 次提交
  41. 04 11月, 2011 1 次提交
  43. 08 10月, 2011 1 次提交
  45. 22 10月, 2010 2 次提交
    • T
      libata: reimplement link power management · 6b7ae954
      由 Tejun Heo 提交于 
      The current LPM implementation has the following issues.

* Operation order isn't well thought-out.  e.g. HIPM should be
  configured after IPM in SControl is properly configured.  Not the
  other way around.

* Suspend/resume paths call ata_lpm_enable/disable() which must only
  be called from EH context directly.  Also, ata_lpm_enable/disable()
  were called whether LPM was in use or not.

* Implementation is per-port when it should be per-link.  As a result,
  it can't be used for controllers with slave links or PMP.

* LPM state isn't managed consistently.  After a link reset for
  whatever reason including suspend/resume the actual LPM state would
  be reset leaving ap->lpm_policy inconsistent.

* Generic/driver-specific logic boundary isn't clear.  Currently,
  libahci has to mangle stuff which libata EH proper should be
  handling.  This makes the implementation unnecessarily complex and
  fragile.

* Tied to ALPM.  Doesn't consider DIPM only cases and doesn't check
  whether the device allows HIPM.

* Error handling isn't implemented.

Given the extent of mismatch with the rest of libata, I don't think
trying to fix it piecewise makes much sense.  This patch reimplements
LPM support.

* The new implementation is per-link.  The target policy is still
  port-wide (ap->target_lpm_policy) but all the mechanisms and states
  are per-link and integrate well with the rest of link abstraction
  and can work with slave and PMP links.

* Core EH has proper control of LPM state.  LPM state is reconfigured
  when and only when reconfiguration is necessary.  It makes sure that
  LPM state is reset when probing for new device on the link.
  Controller agnostic logic is now implemented in libata EH proper and
  driver implementation only has to deal with controller specifics.

* Proper error handling.  LPM config failure is attributed to the
  device on the link and LPM is disabled for the link if it fails
  repeatedly.

* ops->enable/disable_pm() are replaced with single ops->set_lpm()
  which takes @policy and @hints.  This simplifies driver specific
  implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      6b7ae954
    • T
      libata: clean up lpm related symbols and sysfs show/store functions · c93b263e
      由 Tejun Heo 提交于 
      Link power management related symbols are in confusing state w/ mixed
usages of lpm, ipm and pm.  This patch cleans up lpm related symbols
and sysfs show/store functions as follows.

* lpm states - NOT_AVAILABLE, MIN_POWER, MAX_PERFORMANCE and
  MEDIUM_POWER are renamed to ATA_LPM_UNKNOWN and
  ATA_LPM_{MIN|MAX|MED}_POWER.

* Pre/postfixes are unified to lpm.

* sysfs show/store functions for link_power_management_policy were
  curiously named get/put and unnecessarily complex.  Renamed to
  show/store and simplified.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      c93b263e