- 22 12月, 2008 8 次提交
-
-
由 Magnus Damm 提交于
Add sh7343 mstpcr bits and information about their parent clocks. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add sh7723 mstpcr bits and information about their parent clocks. The datasheet is pretty clear about the clocks on this device. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add sh7722 mstpcr bits and information about their parent clocks. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add base code to handle new mstpcr clocks. Make sure clock rates propagate. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Use arch_flags to keep track of register and flag number. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Use divider index value instead of divider value. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Recurse and make sure parent clocks get enabled/disabled. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Now that arch/sh/mm/mmap.c exists, move arch_get_unmapped_area() there. Follows the ARM change. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 12月, 2008 3 次提交
-
-
由 Thomas Gleixner 提交于
Impact: Prevent kernel crash with posix timer clockid CLOCK_MONOTONIC_RAW commit 2d42244a (clocksource: introduce CLOCK_MONOTONIC_RAW) introduced a new clockid, which is only available to read out the raw not NTP adjusted system time. The above commit did not prevent that a posix timer can be created with that clockid. The timer_create() syscall succeeds and initializes the timer to a non existing hrtimer base. When the timer is deleted either by timer_delete() or by the exit() cleanup the kernel crashes. Prevent the creation of timers for CLOCK_MONOTONIC_RAW by setting the posix clock function to no_timer_create which returns an error code. Reported-and-tested-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: change simple_strtol to simple_strtoul 9p: convert d_iname references to d_name.name 9p: Remove potentially bad parameter from function entry debug print.
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix resume (S2R) broken by Intel microcode module, on A110L x86 gart: don't complain if no AMD GART found AMD IOMMU: panic if completion wait loop fails AMD IOMMU: set cmd buffer pointers to zero manually x86: re-enable MCE on secondary CPUS after suspend/resume AMD IOMMU: allocate rlookup_table with __GFP_ZERO
-
- 20 12月, 2008 10 次提交
-
-
由 Dmitry Adamushko 提交于
Impact: fix deadlock This is in response to the following bug report: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12100 Subject : resume (S2R) broken by Intel microcode module, on A110L Submitter : Andreas Mohr <andi@lisas.de> Date : 2008-11-25 08:48 (19 days old) Handled-By : Dmitry Adamushko <dmitry.adamushko@gmail.com> [ The deadlock scenario has been discovered by Andreas Mohr ] I think I might have a logical explanation why the system: (http://bugzilla.kernel.org/show_bug.cgi?id=12100) might hang upon resuming, OTOH it should have likely hanged each and every time. (1) possible deadlock in microcode_resume_cpu() if either 'if' section is taken; (2) now, I don't see it in spec. and can't experimentally verify it (newer ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should be back to its original one (we need to reload ucode anyway so it doesn't seem logical if a cpu doesn't drop the version)... if so, the comparison with memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of the aforementioned 'if' sections might have been triggered - leading to a deadlock. Obviously, in my tests I simulated loading/resuming with the ucode of the same version (just to see that the file is loaded/re-loaded upon resuming) so this issue has never popped up. I'd appreciate if someone with an appropriate system might give a try to the 2nd patch (titled "fix a comparison && deadlock..."). In any case, the deadlock situation is a must-have fix. Reported-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com> Tested-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Julia Lawall 提交于
Since v9ses->uid is unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Wu Fengguang 提交于
d_iname is rubbish for long file names. Use d_name.name in printks instead. Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Acked-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Duane Griffin 提交于
Signed-off-by: NDuane Griffin <duaneg@dghda.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt fusion: clear list of outstanding commands on host reset [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock [SCSI] ibmvstgt: move crq_queue_create to the end of initialization [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix a Oops bug in omap soc driver. ALSA: hda - Remove non-working headphone control for Dell laptops ALSA: hda - Add no-jd model for IDT 92HD73xx ALSA: Revert "ALSA: hda: removed unneeded hp_nid references" ALSA: hda - Add quirk for Dell Studio 17 ALSA: hda - Fix silent HP output on D975
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix problem that deleting multiple logical drives could cause a panic
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: GEM on PAE has problems - disable it for now. drm/i915: Don't return busy for buffers left on the flushing list.
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: Don't read past end of bitmap when reading bitmap.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: ibmphp: Fix module ref count underflow PCI hotplug: acpiphp wants a 64-bit _SUN PCI: pciehp: fix unexpected power off with pciehp_force PCI: fix aer resume sanity check
-
- 19 12月, 2008 16 次提交
-
-
由 Takashi Iwai 提交于
-
由 Stanley Miao 提交于
There will be a Oops or frequent underrun messages when playing music with omap soc driver, this is because a data region is incorretly sized, other data region will be overwriten when writing to this data region. Signed-off-by: NStanley Miao <stanley.miao@windriver.com> Acked-by: NJarkko Nikula <jarkko.nikula@nokia.com> Cc: stable@kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The previous commit re-enabled hp_nid setup for IDT92HD73*, but it's unneeded indeed for Dell laptops that have multiple headphones. Setting the extra hp_nid results in a non-working "Headpohne" mixer control. Thus hp_nid should be 0 for these dell models. Also, the automatic addition of hp_nid should check whether it's a dual-HP model or not. For dual-HPs, the pins are already checked by the early workaround. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the model without the jack-detection for some desktops that have really no jack-detection. The recent driver caused regressions regarding the sound output on such machines. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This reverts commit 07f455f7. ALSA: hda: removed unneeded hp_nid references Removed unneeded hp_nid references for 92hd73xx codec family. This caused the silent output on some Intel desktops due to missing routing of widget 0x0a and 0x0d. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Stephen M. Cameron 提交于
Fix problem that deleting multiple logical drives could cause a panic. It fixes a panic which can be easily reproduced in the following way: Just create several "arrays," each with multiple logical drives via hpacucli, then delete the first array, and it will blow up in deregister_disk(), in the call to get_host() when it tries to dig the hba pointer out of a NULL queue pointer. The problem has been present since my code to make rebuild_lun_table behave better went in. Signed-off-by: NStephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Joerg Schirottke 提交于
Added the matching model=dell-m6 for Dell Studio 17 laptop. Signed-off-by: NJoerg Schirottke <master@kanotix.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dave Airlie 提交于
On PAE systems, GEM allocates pages using shmem, and passes these pages to be bound into AGP, however the AGP interfaces + the x86 set_memory interfaces all take unsigned long not dma_addr_t. The initial fix for this was a mess, so we need to do this correctly for 2.6.29. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Eric Anholt 提交于
These buffers don't have active rendering still occurring to them, they just need either a flush to be emitted or a retire_requests to occur so that we notice they're done. Return unbusy so that one of the two occurs. The two expected consumers of this interface (OpenGL and libdrm_intel BO cache) both want this behavior. Signed-off-by: NEric Anholt <eric@anholt.net> Acked-by: NKeith Packard <keithp@keithp.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 NeilBrown 提交于
When we read the write-intent-bitmap off the device, we currently read a whole number of pages. When PAGE_SIZE is 4K, this works due to the alignment we enforce on the superblock and bitmap. When PAGE_SIZE is 64K, this case read past the end-of-device which causes an error. When we write the superblock, we ensure to clip the last page to just be the required size. Copy that code into the read path to just read the required number of sectors. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: stable@kernel.org
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: async_xor: dma_map destination DMA_BIDIRECTIONAL dmaengine: protect 'id' from concurrent registrations ioat: wait for self-test completion
-
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: favr-32 build fix ATSTK1006: Fix boot from NAND flash avr32: remove .note.gnu.build-id section when making vmlinux.bin avr32: Enable pullup on USART TX lines
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2: Fix bug in bnx2_free_rx_mem(). irda: Add irda_skb_cb qdisc related padding jme: Fixed a typo net: kernel BUG at drivers/net/phy/mdio_bus.c:165! drivers/net: starfire: Fix napi ->poll() weight handling tlan: Fix pci memory unmapping enc28j60: use netif_rx_ni() to deliver RX packets tlan: Fix small (< 64 bytes) datagram transmissions netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: We need to implement arch_ptrace_stop().
-
由 John McCutchan 提交于
Update John McCutchan and Robert Love's email addresses for maintenance of inotify Signed-off-by: NJohn McCutchan <john@johnmccutchan.com> Acked-by: NRobert Love <rlove@rlove.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 12月, 2008 3 次提交
-
-
由 Haavard Skinnemoen 提交于
The favr-32 board code still refers to the old asm/arch header files which were moved to mach/ some time ago. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Haavard Skinnemoen 提交于
Enable JFFS2 write buffer support so that the kernel can access a root filesystem in NAND flash. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Ingo Molnar 提交于
Merge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
-