- 13 3月, 2010 6 次提交
-
-
由 FUJITA Tomonori 提交于
All the architectures properly set NEED_DMA_MAP_STATE now so we can safely add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h inclusion in arch's asm/pci.h Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT, PTRACE_KILL and PTRACE_SINGLESTEP. This implies defining arch_has_single_step in <asm/ptrace.h> and implementing the user_enable_single_step and user_disable_single_step functions, which also causes the breakpoint information to be cleared on fork, which could be considered a bug fix. Also the TIF_SYSCALL_TRACE thread flag is now cleared on PTRACE_KILL which it previously wasn't and the single stepping disable only happens if the tracee process isn't a zombie yet, which is consistent with all architectures using the modern ptrace code. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add a generic implementation of the ipc demultiplexer syscall. Except for s390 and sparc64 all implementations of the sys_ipc are nearly identical. There are slight differences in the types of the parameters, where mips and powerpc as the only 64-bit architectures with sys_ipc use unsigned long for the "third" argument as it gets casted to a pointer later, while it traditionally is an "int" like most other paramters. frv goes even further and uses unsigned long for all parameters execept for "ptr" which is a pointer type everywhere. The change from int to unsigned long for "third" and back to "int" for the others on frv should be fine due to the in-register calling conventions for syscalls (we already had a similar issue with the generic sys_ptrace), but I'd prefer to have the arch maintainers looks over this in details. Except for that h8300, m68k and m68knommu lack an impplementation of the semtimedop sub call which this patch adds, and various architectures have gets used - at least on i386 it seems superflous as the compat code on x86-64 and ia64 doesn't even bother to implement it. [akpm@linux-foundation.org: add sys_ipc to sys_ni.c] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NDavid Howells <dhowells@redhat.com> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add a generic implementation of the old mmap() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add a generic implementation of the old select() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Acked-by: NAndreas Schwab <schwab@linux-m68k.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NDavid Howells <dhowells@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 3月, 2010 1 次提交
-
-
由 Roel Kluin 提交于
When we reach the loop, len is at least 1, we only stay in the loop when len is at least MAX_BYTE_COUNT + 1, MAX_BYTE_COUNT is subtracted in each iteration. So when we leave the loop, or didn't take it, len is at least 1. Testing whether len is non-zero appears redundant. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 21 2月, 2010 1 次提交
-
-
由 Russell King 提交于
On VIVT ARM, when we have multiple shared mappings of the same file in the same MM, we need to ensure that we have coherency across all copies. We do this via make_coherent() by making the pages uncacheable. This used to work fine, until we allowed highmem with highpte - we now have a page table which is mapped as required, and is not available for modification via update_mmu_cache(). Ralf Beache suggested getting rid of the PTE value passed to update_mmu_cache(): On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables to construct a pointer to the pte again. Passing a pte_t * is much more elegant. Maybe we might even replace the pte argument with the pte_t? Ben Herrenschmidt would also like the pte pointer for PowerPC: Passing the ptep in there is exactly what I want. I want that -instead- of the PTE value, because I have issue on some ppc cases, for I$/D$ coherency, where set_pte_at() may decide to mask out the _PAGE_EXEC. So, pass in the mapped page table pointer into update_mmu_cache(), and remove the PTE value, updating all implementations and call sites to suit. Includes a fix from Stephen Rothwell: sparc: fix fallout from update_mmu_cache API change Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 20 2月, 2010 1 次提交
-
-
由 Abdoulaye Walsimou Gaye 提交于
This patch fix the below build error for arm1026ej-s processor (IntegratorCP/arm1026ej-s board). CC init/main.o In file included from include/linux/highmem.h:8, from include/linux/pagemap.h:10, from include/linux/mempolicy.h:62, from init/main.c:52: arch/arm/include/asm/cacheflush.h:134:2: error: #error Unknown cache maintainence model make[1]: *** [init/main.o] Erreur 1 make: *** [init] Erreur 2 Signed-off-by: NAbdoulaye Walsimou Gaye <walsimou@walsimou.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 2月, 2010 10 次提交
-
-
由 Fenkart/Bostandzhyan 提交于
Makes it consistent with VMALLOC_START Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Fenkart/Bostandzhyan 提交于
Adds DMA area to 'virtual memory map' startup message Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
If we're only reading the VFP context via the ptrace call, there's no need to invalidate the hardware context - we only need to do that on PTRACE_SETVFPREGS. This allows more efficient monitoring of a traced task. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
On ARMv7, the use of the cp15 operations for barriers is deprecated in favour of the isb, dsb, and dmb instructions. Change the locking functions to use the appropriate type of dsb for the architecture being built for. Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
In preparation for perf-events support, ARM needs to support atomic64_t operations. v6k and above support the ldrexd and strexd instructions to do just that. This patch adds atomic64 support to the ARM architecture. v6k and above make use of new instructions whilst older cores fall back on the generic solution using spinlocks. If and when v7-M cores are supported by Linux, they will need to fall back on the spinlock implementation too. Signed-off-by: NWill Deacon <will.deacon@arm.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Kernel debuggers want to be informed of die() events, so that they can take some action to allow the problem to be inspected. Provide the hook in a similar manner to x86. Note that we currently don't implement the individual trap hooks. Acked-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jeremy Kerr 提交于
The ARM setup code includes its own parser for early params, there's also one in the generic init code. This patch removes __early_init (and related code) from arch/arm/kernel/setup.c, and changes users to the generic early_init macro instead. The generic macro takes a char * argument, rather than char **, so we need to update the parser functions a little. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
All RTC drivers have been converted to rtclib, so the old code providing the set_rtc function pointer, save_time_delta() and restore_time_delta() functions is obsolete. Remove it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
This allows the procfs vmallocinfo file to show who created the ioremap regions. Note: __builtin_return_address(0) doesn't do what's expected if its used in an inline function, so we leave __arm_ioremap callers in such places alone. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 2月, 2010 4 次提交
-
-
由 Russell King 提交于
These are now unused, and so can be removed. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-By: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-By: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-By: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Russell King 提交于
The DMA API has the notion of buffer ownership; make it explicit in the ARM implementation of this API. This gives us a set of hooks to allow us to deal with CPU cache issues arising from non-cache coherent DMA. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-By: NSantosh Shilimkar <santosh.shilimkar@ti.com> Tested-By: NJamie Iles <jamie@jamieiles.com>
-
- 13 2月, 2010 3 次提交
-
-
由 Russell King 提交于
Most machine classes want some way to register a block of clk_lookup structures, and most do it by implementing a clks_register() type function which walks an array, or by open-coding a loop. Consolidate all this into clkdev_add_table(). Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com> Acked-by: NEric Miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jamie Iles 提交于
The perf events subsystem allows counting of both hardware and software events. This patch implements the bare minimum for software performance events. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NJamie Iles <jamie.iles@picochip.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jamie Iles 提交于
To add support for perf events and to allow the hardware counters to be shared with oprofile, we need a way to reserve access to the pmu (performance monitor unit). Platforms with PMU interrupts should register the interrupts in arch/arm/kernel/pmu.c Signed-off-by: NJamie Iles <jamie.iles@picochip.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 06 2月, 2010 1 次提交
-
-
由 James Bottomley 提交于
ARM cannot prevent cache movein, so this patch implements both the flush and invalidate pieces of the API. Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 20 1月, 2010 1 次提交
-
-
由 Tony Lindgren 提交于
The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 1月, 2010 2 次提交
-
-
由 Santosh Shilimkar 提交于
The file arch/arm/include/asm/cpu.h needs to include 'linux/cpu.h' to meet its dependency. Otherwise when using "struct cpuinfo_arm" and including just 'asm/cpu.h' throws below error - arch/arm/include/asm/cpu.h:16: error: field 'cpu' has incomplete type To fix this otherway, one can also include both linux/cpu.h and asm/cpu.h but it shoudn't be that way. So this patch fixes this by including the linux/cpu.h in asm/cpu.h, so that including alone asm/cpu.h is enough. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Hüwe 提交于
A lot of ARM-defconfigs (those without CONFIG_ISA_DMA_API set) fail to build [1][2][3] due to the changes of the patch [PATCH] PCI: Clean up build for CONFIG_PCI_QUIRKS unset by Rafael J. Wysocki (Sat, 2 Jan 2010 22:57:24 +0100) [4] as the referenced variable 'isa_dma_bridge_buggy' in asm/dma.h is enclosed by the CONFIG_ISA_DMA_API conditional all configs without this setting fail to build. I'm not sure wether moving the condition is the right way to solve the issue, but atleast it fixes the issue :) References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983354/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1983333/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/1983337/ [4] http://lkml.org/lkml/2010/1/2/102Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 1月, 2010 1 次提交
-
-
由 Jamie Iles 提交于
Make registers unsigned for kernel space. This is important for example in the perf events where the PC is stored into a u64. We don't want it sign extended so make the regs unsigned to prevent casts throughout the kernel. Signed-off-by: NJamie Iles <jamie.iles@picochip.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 1月, 2010 1 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 12月, 2009 1 次提交
-
-
由 Russell King 提交于
26-bit ARM support was removed a long time ago, and this symbol has been defined to be 'y' ever since. As it's never disabled anymore, we can kill it without any side effects. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 12月, 2009 1 次提交
-
-
由 Russell King 提交于
This avoids races in the VFP code where the dead thread may have state on another CPU. By moving this code to exit_thread(), we will be running as the thread, and therefore be running on the current CPU. This means that we can ensure that the only local state is accessed in the thread notifiers. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 12月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Currently all architectures but microblaze unconditionally define USE_ELF_CORE_DUMP. The microblaze omission seems like an error to me, so let's kill this ifdef and make sure we are the same everywhere. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk> Cc: <linux-arch@vger.kernel.org> Cc: Michal Simek <michal.simek@petalogix.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 12月, 2009 5 次提交
-
-
由 Thomas Gleixner 提交于
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Name space cleanup for rwlock functions. No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
-
由 Thomas Gleixner 提交于
Not strictly necessary for -rt as -rt does not have non sleeping rwlocks, but it's odd to not have a consistent naming convention. No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
-
由 Thomas Gleixner 提交于
Name space cleanup. No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
-
由 Thomas Gleixner 提交于
Further name space cleanup. No functional change Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
-