Implement support for the VBLANK IOCTL. Note that Tegra is somewhat
special in this case because it doesn't use the generic IRQ support
provided by the DRM core (DRIVER_HAVE_IRQ) but rather registers one
interrupt handler for each display controller.

While at it, clean up the way that interrupts are enabled to ensure
that the VBLANK interrupt only gets enabled when required.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

The sequence for replacing the scanout buffer is much shorter than a
full mode change operation so implementing this callback considerably
speeds up cases where only a new framebuffer is to be scanned out.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for the B and C planes which support RGB and YUV pixel
formats and can be used as overlays or hardware cursor. Currently 32-bit
XRGB as well as UYVY, YUV420 and YUV422 pixel formats are advertised.
Other formats should be easy to add but these are the most common ones
and should cover the majority of use-cases.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Tegra uses the CMA FB helpers so framebuffers passed to the driver need
to use the corresponding functions to access the underlying GEM objects.

This used to work because struct tegra_framebuffer was sufficiently
similar to struct drm_fb_cma but that isn't guaranteed to stay that way.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Driver implementations of the drm_crtc's .page_flip() function are
required to update the crtc->fb field on success to reflect that the new
framebuffer is now in use. This is important to keep reference counting
on the framebuffers balanced.

While at it, document this requirement to keep others from falling into
the same trap.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The values of n, m1 and m2 needs to be subtracted by 2 before writing them to
the FP register. The dot clock calculation already thinks of these values in
register form so we must also specify them as such.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds device tree match table for Exynos G2D controller.
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch programs the core and timing generator registers using the
timing data provided in drm_display_mode and not using hard-coded
configurations.

Additional PHY configs has been added. This allows us to support more
permissible resolutions and refresh rates.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NAkshay Saraswat <Akshay.s@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

With this patch, mixer driver find the correct resolution mode for
the range of resolutions, upto 1080 vertical lines. Resolution will
be categorized to NTSC SD, PAL SD or HD and the correct mode is
set to the mixer configuration register.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds the implementation of check_timing callback in the mixer
driver. Based on the mixer version, correct set of restrictions will be
exposed by the mixer driver. A resolution will be acceptable only if passes
the criteria set by mixer and hdmi IPs.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds the display mode check operation to exynos_mixer_ops
in drm-common-hdmi. In Exynos SoCs, mixer IP can put certain restrictions
on the proposed display modes. These restriction needs to be considered
during mode negotiation, which happens immediately after edid parsing.

Both, mixer check-mode and hdmi check-timing callbacks are called one after
another and ANDed result is returned back.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch releases allocated resources properly when
exynos_user_fb_create() is failed.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch fixes wrong pointer access issue to filp->f_op and
filp->private_data.

The exynos_drm_gem_mmap_ioctl() changes filp->f_op and
filp->private_data temporarily and restore them to use
original ones in exynos_drm_gem_mmap_buffer() but there
was no lock between the changing and the restoring so
wrong pointer access to filp->f_op and filp->private_data
was induced by vm close callback.

So this patch uses mutex lock properly to resolve this issue.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Fixes the following checkpatch warning:
WARNING: sizeof *sgt should be sizeof(*sgt)
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

GETFB ioctl request creates a new handle to only one gem object
so it should check if the given fb has one gem object.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch modifies iommu address allocation order from 64k
to 4k. 64k order causes waste of the io space and this was
our mistakes.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Some bioses don't set the function mask correctly
which caused required functions to be disabled.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=53111Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Cleans up the code for future asics

v2: rebase, fix some missing radeon_asic updates
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is required to get the reference clock used
by the gfx engine for things like timestamps. Fixes
support for GL extensions the use timestamps on
certain boards.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Smatch anlysis:

drivers/gpu/drm/radeon/atom.c:1242 atom_index_iio() error: potential null
 dereference 'ctx->iio'.  (kzalloc returns null)

Also cleaned up some checks before calls to kfree(). kfree(NULL) is OK.

Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Michel Dänzer" <michel.daenzer@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

hdmi audio works fine.  The warning just confuses users.

fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=44341Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org

vddci needs to track mclk for multi-head.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>

Supervisor can now handle more than one operation within a single
series of interrupts.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In v3.3, the gma500 drm driver moved from staging to drm group by
Alan Cox's 3abcf41f patch. the gma500 drm driver should control
brightness well and don't need gma500 stub driver anymore.

Reference:
http://lists.freedesktop.org/archives/dri-devel/2012-May/023426.html
http://lists.freedesktop.org/archives/dri-devel/2012-May/023467.htmlAcked-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If I build nouveau on ia64, Kconfig warns:

warning: (DRM_NOUVEAU) selects ACPI_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI)
warning: (DRM_NOUVEAU) selects MXM_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI_WMI)

Make all the ACPI support depend on X86 and select
X86_PLATFORM_DEVICES.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

DP link training is now handled as part of the supervisor processing,
and can no longer race with it.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We need to be able to do link training for PIOR-connected ANX9805 from
the third supervisor handler (due to script ordering in the bios, can't
have the "user" call train because some settings are overwritten from
the modesetting bios scripts).

This moves link training for SOR-connected DP encoders to the second
supervisor interrupt, *before* we call the modesetting scripts (yes,
different ordering from PIOR is necessary).  This is useful since we
should now be able to remove some hacks to workaround races between
the supervisor and link training paths.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

i2c_algo_bit sleeps...
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Return an out-of-range value instead to signal a failure from
exec_clkcmp().
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

A single U encoder table can match multiple DCB entries, whereas the
reverse is not true and can lead to us not matching a DCB entry at
all, and fail to initialise some encoders.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Matches format used by a couple of other vbios tables, useful
to have laying around already calculated.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

For off-chip transmitters we won't necessarily have an i2c table entry
to lookup, but we can do it instead by encoding the type to include
the extdev type and looking that up instead.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>