Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 12 10月, 2007 4 次提交
  3. 20 7月, 2007 4 次提交
  5. 16 5月, 2007 4 次提交
    • B
      ide: remove ide_dma_enable() · 4728d546
      由 Bartlomiej Zolnierkiewicz 提交于 
      * check ->speedproc return value in ide_tune_dma()
* use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers
* remove no longer needed ide_dma_enable()
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      4728d546
    • B
      cs5530/sc1200: add ->speedproc support · 3c3f5d2c
      由 Bartlomiej Zolnierkiewicz 提交于 
      * add {cs5530,sc1200}_tunepio() for programming PIO timings

* add {cs5530,sc1200}_tune_chipset() (->speedproc method) for setting
  transfer mode and convert {cs5530,sc1200}_config_dma() to use it

* bump driver version
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      3c3f5d2c
    • B
      cs5530/sc1200: DMA support cleanup · a01ba401
      由 Bartlomiej Zolnierkiewicz 提交于 
      sc1200.c:

* remove open-coded variant of ide_dma_host_off() (== ->dma_host_off),
  it is not needed because ->dma_off_quietly calls ->dma_host_off

* use ->dma_host_on (== ide_dma_host_on() for this driver) instead of
  open-coded variant, call it from the users of sc1200_config_dma2()

  [ there is no need to call ->dma_host_on in sc1200_config_dma() because
    core code takes care of calling ->ide_dma_on on successful execution
    of ->ide_dma_check ]

* add comment about ->tuneproc interface abuse

cs5530.c/sc1200.c:

* core code takes care of calling ->dma_off_quietly before calling
  ->ide_dma_check so there is no need to call it in ->ide_dma_check methods

* bump driver version
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      a01ba401
    • B
      cs5530/sc1200: add ->udma_filter methods · 5fd216bb
      由 Bartlomiej Zolnierkiewicz 提交于 
      CS5530/SC1200 specifies that two drives on the same cable cannot mix
UDMA/MDMA.  Add {cs5530,sc1200}_udma_filter() to handle this.  This also
makes it possible to remove open-coded best DMA mode selection and use
standard ide_use_dma()/ide_max_dma_mode() helpers.  While at it bump
version numbers.

There should be no functionality changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      5fd216bb
  7. 17 2月, 2007 2 次提交
    • B
      ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2) · 7469aaf6
      由 Bartlomiej Zolnierkiewicz 提交于 
      * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0'
  make these functions void and while at it drop "ide_" prefix
* fix comment for __ide_dma_off_quietly()
* make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix

v2:
* while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(),
  sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}()
  and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly()
  [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      7469aaf6
    • B
      ide: add ide_set_dma() helper (v2) · 3608b5d7
      由 Bartlomiej Zolnierkiewicz 提交于 
      * add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return
  -1 when DMA needs to be disabled (== need to call ->ide_dma_off_quietly)
   0 when DMA needs to be enabled  (== need to call ->ide_dma_on)
   1 when DMA setting shouldn't be changed
* fix IDE code to use ide_set_dma() instead if using ->ide_dma_check directly

v2:
* updated for scc_pata
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      3608b5d7
  9. 27 1月, 2007 1 次提交
  11. 03 10月, 2006 1 次提交
  13. 01 7月, 2006 1 次提交
  15. 29 6月, 2006 1 次提交
  17. 05 9月, 2005 1 次提交
  19. 03 7月, 2005 1 次提交
  21. 17 4月, 2005 2 次提交