Note the sun4i-ts controller is capable of detecting a second touch, but
when a second touch is present then the accuracy becomes so bad the
reported touch location is not useable.

The original android driver contains some complicated heuristics using the
aprox. distance between the 2 touches to see if the user is making a pinch
open / close movement, and then reports emulated multi-touch events around
the last touch coordinate (as the dual-touch coordinates are worthless).

These kinds of heuristics are just asking for trouble (and don't belong in
the kernel). So this driver offers straight forward, reliable single touch
functionality only.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

s/Logictech/Logitech/
Signed-off-by: NDaniele Forsi <dforsi@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Replace existing resource handling in the driver with managed device
resources, this ensures more consistent error values and simplifies error
handling paths:

kzalloc -> devm_kzalloc
gpio_request_one -> devm_gpio_request_one
input_allocate_polled_device -> devm_input_allocate_polled_device
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Managed resources are becoming more and more popular in drivers. Let's
implement managed polled input devices, to complement managed regular input
devices.

Similarly to managed regular input devices only one new call
devm_input_allocate_polled_device() is added and the rest of APIs is
modified to work with both managed and non-managed devices.
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Tested-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Polled device's attributes controlling polling rate and whether polling is
enabled are attached to input device. We should have device core
instantiate them for us, so that they are created by the time new device
notification is sent to userspace, instead of doing it ourselves
afterwards.
Tested-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Replace existing gpio resource handling in the driver with managed
resources, this ensures more consistent error values and simplifies error
paths.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make of_device_id array const, because all OF functions handle it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch simplifies GPIO handling in the driver by using GPIO functions
based on descriptors. As a result this driver now can be used for boards
without DT support.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Simplify the driver by using managed resources for memory allocation of
internal structure, input device allocation and irq request.
Signed-off-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Change some dev_dbg() invocations to dev_err() ones, because they
are supposed to output error messages.
Signed-off-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch converts descriptions of the structures defined in
linux/gpio_keys.h to follow kernel-doc format.

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This makes the error handling much more simpler than open-coding everything
and in addition makes the probe function smaller an tidier.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Using devm_regulator_bulk_get() and devm_input_allocate_device() can make
the code cleaner and smaller as we do not need to manually free resources
the error and remove paths.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

While searching for users of spi_async() I found a reference in the ad7877
driver to using it to initiate data transfer from the interrupt handler.
However there is no code for this, instead the interrupt handler is a
threaded handler and uses spi_sync() instead.

Remove the bitrotted comment, though in actual fact the use case mentioned
is a great use for spi_async() since it would cut down on latency handling
the interrupt by saving us a context switch before we start SPI.

This was previously implemented, it was removed in commit b534422b
(Input: ad7877 - switch to using threaded IRQ) for code complexity reasons.
It may be better to revert that commit instead.
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

We put this workaround in 2008 and the offending userspace has been fixed
up long time ago; the link in the message is no longer valid either, so it
is time to retire it.
Reviewed-by: NPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds ST Keyscan driver to use the keypad hw a subset of ST
boards provide. Specific board setup will be put in the given dt.
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: NGiuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

While searching for users of spi_async() I got a false positive in the
ads7846 driver, fix that.
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Implement device tree probing for the tc3589x keypad driver.
This is modeled on the STMPE keypad driver and tested on the
Ux500 TVK1281618 UIB.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The w90p910_ts touchscreen driver is heavily architecture dependent,
so there is no point in letting it be built on other architectures
than it was written for.

All other W90P910/W90X900 drivers already have that dependency, so it
makes things more consistent and configuration easier.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by Wan Zongshun <mcuos.com@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The if condition was accidentally deleted here so we return every time
instead of returning on error.

Fixes: fd335ab0 ('Input: edt-ft5x06 - add support for M09 firmware version')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Acked-By: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Addresses issues related to when a second finger enters or leaves the
field, causing the cursor to jump or the page to scroll unexpectedly; now,
we discard any movement change that happens at the exact moment we detect a
change in the number of fingers touching the trackpad. This doesn't
completely resolve the issue but does greatly mitigate it.
Signed-off-by: NClinton Sprain <clintonsprain@gmail.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use smoothed version of sensor array data to calculate movement and add
weight to prior values when calculating average. This gives more granular
and more predictable movement.
Signed-off-by: NClinton Sprain <clintonsprain@gmail.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds support for the GPIO buttons on some Intel Bay Trail
tablets originally running Windows 8. The ACPI description of these
buttons follows "Windows ACPI Design Guide for SoC Platforms".
Signed-off-by: NLejun Zhu <lejun.zhu@linux.intel.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use the regmap APIs for this driver instead of custom pm8xxx
APIs. This breaks this driver's dependency on the pm8xxx APIs and
allows us to easily port it to other bus protocols in the future.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Simplify the error paths and reduce the lines of code in this
driver by using the devm_* APIs.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>