This reverts commit 7c510133.

Well looks like not enough digging was done, libdrm_nouveau before 2.4.33
used contexts,

292da616fe1f936ca78a3fa8e1b1b19883e343b6 nouveau: pull in major libdrm rewrite

got rid of them,
Reported-by: NPaul Zimmerman <Paul.Zimmerman@synopsys.com>
Reported-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Otherwise the system will burn even brighter and worse, leave the user
wondering what's going on exactly.

Since we already have a panic handler which will (try) to restore the
entire fbdev console mode, we can just bail out.  Inspired by a patch from
Konstantin Khlebnikov.  The callchain leading to this, cut&pasted from
Konstantin's original patch:

callstack:
panic()
bust_spinlocks(1)
unblank_screen()
vc->vc_sw->con_blank()
fbcon_blank()
fb_blank()
info->fbops->fb_blank()
drm_fb_helper_blank()
drm_fb_helper_dpms()
drm_modeset_lock_all()
mutex_lock(&dev->mode_config.mutex)

Note that the entire locking in the fb helper around panic/sysrq and kdbg
is ...  non-existant.  So we have a decent change of blowing up
everything.  But since reworking this ties in with funny concepts like the
fbdev notifier chain or the impressive things which happen around
console_lock while oopsing, I'll leave that as an exercise for braver
souls than me.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix uninitialized warning.

drivers/gpu/drm/ttm/ttm_object.c: In function ‘ttm_base_object_lookup’:
drivers/gpu/drm/ttm/ttm_object.c:213:10: error: ‘base’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
  kref_put(&base->refcount, ttm_release_base);
          ^
drivers/gpu/drm/ttm/ttm_object.c:221:26: note: ‘base’ was declared here
  struct ttm_base_object *base;
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

After a vmalloc failure in ttm_dma_tt_alloc_page_directory(),
ttm_dma_tt_init() will call ttm_tt_destroy() to cleanup, and end up
inside the driver's unpopulate() hook when populate() has never yet
been called.

On nouveau, the first issue to be hit because of this is that
dma_address[] may be a NULL pointer.  After working around this,
ttm_pool_unpopulate() may potentially hit the same issue with
the pages[] array.

It seems to make more sense to avoid calling unpopulate on already
unpopulated TTMs than to add checks to all the implementations.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On HSW enabling a plane on a disabled pipe may hang the entire system.
And there's no good reason for doing it ever, so just don't.

v2: Move the crtc active checks to intel_crtc_cursor_{set,move} to
    avoid confusing people during modeset

Cc: stable@vger.kernel.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The cursor is disabled before crtc mode set in crtc disable (and we
assert this is the case), and enabled afterwards in crtc enable. Do not
update it in crtc mode set.

On HSW enabling a plane on a disabled pipe may hang the entire system.
And there's no good reason for doing it ever, so just don't.

v2: Add note about HSW hangs - vsyrjala

Cc: stable@vger.kernel.org
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

TTM calls the destructor on its own already...
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In case of error, the function drm_prime_pages_to_sg() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Silences the following warnings:
drivers/gpu/drm/exynos/exynos_drm_fbdev.c:102:40: warning:
incorrect type in assignment (different address spaces)
drivers/gpu/drm/exynos/exynos_drm_fbdev.c:102:40:
expected void [noderef] <asn:2>*kvaddr
drivers/gpu/drm/exynos/exynos_drm_fbdev.c:102:40:    got void *
drivers/gpu/drm/exynos/exynos_drm_fbdev.c:107:48: warning:
incorrect type in assignment (different address spaces)
drivers/gpu/drm/exynos/exynos_drm_fbdev.c:107:48:
expected void [noderef] <asn:2>*kvaddr
drivers/gpu/drm/exynos/exynos_drm_fbdev.c:107:48:    got void *
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fixes the following warning:
drivers/gpu/drm/exynos/exynos_drm_buf.c:66:29: warning:
incorrect type in assignment (different address spaces)
drivers/gpu/drm/exynos/exynos_drm_buf.c:66:29:
expected void [noderef] <asn:2>*kvaddr
drivers/gpu/drm/exynos/exynos_drm_buf.c:66:29: got void *
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Now that DRM_EXYNOS depends on OF, we do not need individual
drivers to depend on it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This was inherited from i915/udl, and not actually needed.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Putting everything into VRAM seems to help.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We were using the wrong set_properly callback so we always
ended up with Full scaling even if something else (Center or
Full aspect) was selected.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Calling force_performance_level() from set_power_state()
doesn't work on some asics because the current power
state pointer has not been properly updated at that point.
Move the calls to force_performance_level() out of the
asic specific set_power_state() functions and into
the main power state sequence.

Fixes dpm resume on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I keep making that one, so checked if I was the only one. Apparently
not.

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the low and high sclks within a power state are the same,
there no need to enable sclk scaling.  Enabling sclk scaling
can cause display stability issues on some boards.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

If the low and high sclks are the same, there is no need to
enable sclk scaling.  This causes display stability issues on
certain boards.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60857Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: NChristian König <christian.koenig@amd.com>

Since the clock scaling is based on fb divider adjustments,
make sure the other pll parameters are the same.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Rather than open coding it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

This very much looks like copypasta from drm/i915's fault handler.
It was used there to duct-tape over issues around gpu reset handling.

Since that can't ever happen for udl and there's seemingly no other
reason for this just drop it.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is just a remnant from the old days when our reset handling was
horribly racy, suffered from terribly locking issues and often happily
live-locked. Those days are now gone so we can drop the hacks and just
rip the reschedule-point out.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The dereference to 'pdata' should be moved below the NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>

When porting from UMS I mistyped this from the wrong place, AST noticed
and pointed it out, so we should fix it to be like the X.org driver.
Reported-by: NY.C. Chen <yc_chen@aspeedtech.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Yet another regression due to

commit 135c81b8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jul 21 21:37:09 2013 +0200

    drm/i915: clean up crtc timings computation

I'm starting to wonder whether this was worth it ...

v2: Actually make it compile.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We've failed to properly clear out the flags when converting a dtd to
a drm mode. For more paranoia just memset the entire structure (and
drop the now redundant clears).

Also since

commit 135c81b8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jul 21 21:37:09 2013 +0200

    drm/i915: clean up crtc timings computation

we don't update the crtc timings any more properly, so do that again.

v2: Remove more redundant clearing, spotted by Ville.

v3: Actually make it compile. Oops.

v4: Use a temporary structure to fill in the mode and copy it over
with drm_mode_copy. This will ensure we don't clobber the mode list or
id. Suggested by Ville.

Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Use the = {}; structure clearing instead of memset as
suggested by Ville.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Occasionally we seem to miss an IRQ from the ME (microengine).  I'm not
entirely sure the root cause, but for now we can unwedge things by
retiring from the hangcheck timer.
Signed-off-by: NRob Clark <robdclark@gmail.com>

When we CPU_PREP a bo with NOSYNC flag (for example, to implement
PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE), an -EBUSY return indicates to
userspace that the bo is still busy.  Previously it was incorrectly
returning 0 in this case.

And while we're in there throw in an bit of extra sanity checking in
case userspace tries to wait for a bogus fence.
Signed-off-by: NRob Clark <robdclark@gmail.com>

In case of error, the function drm_prime_pages_to_sg() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>

This adds the enable_bapm callback for kb/kv.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the enable_bapm callback for trinity.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm is a pm feature for sharing the power budget between
the GPU and the CPU on APUs.  It needs to be enabled or
disabled in certain circumstances.  For now, disable it
when on battery and enable it when on AC power.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm is a power management feature for handling the
power budget between the CPU and GPU on APUs.  This
patch adds support for enabling or disabling it.
For now disable it by default.  Enabling it properly
requires quite a bit more work and will be addressed
in a separate patch.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm is a power management feature for handling the
power budget between the CPU and GPU on APUs.  This
patch adds support for enabling or disabling it.
For now disable it by default.  Enabling it properly
requires quite a bit more work and will be addressed
in a separate patch.

This patch fixes hangs on boot on certain trinity
laptops when the system is on battery power.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The hwmon sysfs interface allows exposing temperature limits. The "max"
and "min" thresholds will be exposed as a critical high limit and its
hysteresis value, respectively. This gives the user a better idea of how
well cooling is doing and whether it is sufficient.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

You can get the driver data from struct device directly, there's no
need to get the PCI device first.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The OUTPUT_ENABLE action jumps past the point in the coder where
the data_offset is set on certain rs780 cards.  This worked
previously because the OUTPUT_ENABLE action is always called
immediately after the ENABLE action so the data_offset remained
set.  In 6f8bbaf568c7f2c497558bfd04654c0b9841ad57
(drm/radeon/atom: initialize more atom interpretor elements to 0),
we explictly reset data_offset to 0 between atom calls which then
caused this to fail.  The fix is to just skip calling the
OUTPUT_ENABLE action on the problematic chipsets.  The ENABLE
action does the same thing and more.  Ultimately, we could
probably drop the OUTPUT_ENABLE action all together on DCE3
asics.

fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60791

v2: only rs880 seems to be affected
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org